BRILLIANT! My parking brake broke, and the flashing red warning light was driving me crazy. This process worked perfectly and fixed my sanity. I cannot thank you guys enough!
I did the counterclockwise turn to remove the needles and it worked perfectly. Rods stayed put and it was easy to put them back on. Make sure you mark their location on a piece of tape before you remove them though...
hiya buddy i,m having issue with the temp gague i took it of put it back but after a while the temp gague will jump up and stay up some times it will go back to normal do you think i have a fault somewhere. it every time i put the key in the clocks jump a little and when it jumps thats when the temp just going above the red where the neddle get stuck. any advise will be great thanks in advance
Hi - i did write to the company in Taiwan / China but they pointed me to the German company that are the importers ( Westfalia ) - i will contact them again !
powerfulukltd great thanks, I did ring a Westfalia distributor in Harrogate today, he said they couldn’t get spare parts and I’d need to ask Land Rover, I rang them and they couldn’t help, could only get me a full new tow bar! If you could get hold of these gearbox parts I’m sure that would help loads of people out, seems to be a weak link in the whole system. Thanks
Hi these new video's are brill, im looking to change my dials and headlights and bumpers soon...few questions tho, RRS 2006 bonnet catches above the grill, common fault, mine wont grab every time. and will you be opening up a headlights to add the new style DRL rings ( oven bake )..i need the dim's...lastly a oil change would be nice...lol...lol...thanks pal keep up the great work...100% BRILL
Hi - i have done the video today on how to remove the fridge - this should show you the loom and connector that are needed - in the end it is just 2 wires - Earth and Ignition live ! As it is so simple i am pretty sure that they will have fitted this connector to all cars !
So is this process similar for the 2003 Range Rover L322? My information LCD display is pixelated and needs to be replaced. Do you have a video for LCD repair?
Hi - we have not done this but it should be similar to a degree - there are some companies out there offering repairs for the LCD screen - it is normally the conductive joint on the ribbon cable going to the screen - i think they use anisotropic adhesive which fails. ( in a previous life i used to work in the electronics industry.... but that's another story )
hello brother can you help me please i have rangr rover sport 2008 The wire was cut off from connector cluser can you give me circuit wiring So that I can return it to connector thank you
And you broke the rev, temp and fuel pointer motors... they will never work as they should again. Worth including such information at least in description as that would potentially save many people lots of money..
@@rajdattani1507 if you pulled out the shafts out of the pointer motors then test them to see if they move smoothly. You'll see what the problem is. In some very rare cases it's not apparent straightaway, they seem to still work but stutter a bit and sometimes won't go back to zero. What to avoid? Removing the pointers at all unless you have a really valid reason but if you do, you should already have experience in removing them without damaging the motors.
BRILLIANT! My parking brake broke, and the flashing red warning light was driving me crazy. This process worked perfectly and fixed my sanity. I cannot thank you guys enough!
You're welcome!
I did the counterclockwise turn to remove the needles and it worked perfectly. Rods stayed put and it was easy to put them back on. Make sure you mark their location on a piece of tape before you remove them though...
Your videos are the best!! Super helpful and really funny! Right Tom? Thanks for being awesome!
Brilliant and informative video. Thanks
hiya buddy i,m having issue with the temp gague i took it of put it back but after a while the temp gague will jump up and stay up some times it will go back to normal do you think i have a fault somewhere. it every time i put the key in the clocks jump a little and when it jumps thats when the temp just going above the red where the neddle get stuck. any advise will be great
thanks in advance
Interesting but I would never be able to do this. Is there anyway I could install tvs at back of the head rest.
Can I get away with just blanking of the afs light? Or do I also have to get the ccf done? Cheers
Does the anti clockwise method work?? Need too remove mine on a L322 for pixel screen replacement
can those silver rings be removed or are they stuck /same part as the black background?
Hi i have land rover lr3 and i want to change cluster lights from green to white. And i was wondering how hard is it and what kind of leds go in?
great video by the way.
Did you ever try the counterclockwise method to remove the needles?
Good vid. Anyone know where to buy replacement lcd panels?
Does anyone know if these instrument clusters work in a defender?
What type/size of led is used on the board? I'm trying to replace the check engine led.
Thank you for a great video.
Did you ever get an answer
Hi Guys, did you ever find out about the gearbox replacement on the tow bar?, I’ve stripped mine down and it’s mashed inside! Thanks.
Hi - i did write to the company in Taiwan / China but they pointed me to the German company that are the importers ( Westfalia ) - i will contact them again !
powerfulukltd great thanks, I did ring a Westfalia distributor in Harrogate today, he said they couldn’t get spare parts and I’d need to ask Land Rover, I rang them and they couldn’t help, could only get me a full new tow bar! If you could get hold of these gearbox parts I’m sure that would help loads of people out, seems to be a weak link in the whole system. Thanks
Thx for sharing, do u have the pinouts for this cluster by any chance?
They should be here
www.lrservice.ru/data/277/RR_SPORT_VIN_147226_OK.pdf
Hi these new video's are brill, im looking to change my dials and headlights and bumpers soon...few questions tho, RRS 2006 bonnet catches above the grill, common fault, mine wont grab every time. and will you be opening up a headlights to add the new style DRL rings ( oven bake )..i need the dim's...lastly a oil change would be nice...lol...lol...thanks pal keep up the great work...100% BRILL
Will my RRS 2006 already have the loom ready to plug in a cooler box, I want one but not sure if the loom / cable is there ready for it..
This video coming soon - well how to take the fridge out... so this should help
Hi - i have done the video today on how to remove the fridge - this should show you the loom and connector that are needed - in the end it is just 2 wires - Earth and Ignition live ! As it is so simple i am pretty sure that they will have fitted this connector to all cars !
So is this process similar for the 2003 Range Rover L322? My information LCD display is pixelated and needs to be replaced. Do you have a video for LCD repair?
Hi - we have not done this but it should be similar to a degree - there are some companies out there offering repairs for the LCD screen - it is normally the conductive joint on the ribbon cable going to the screen - i think they use anisotropic adhesive which fails. ( in a previous life i used to work in the electronics industry.... but that's another story )
What kind of Led bulbs are they? I was wanting to change the color from green to red.
Did you ever change the led? If so what did you use?
That’s odd me asking you then you asking lol
Can you do mine how much you’ll charge
I did this method on my range rover sport 2006 2.7 I removed the clock and i put it back on and now my car won’t turn on can u help please
Hi did you swap clusters or use the original one you removed from the car ?
hello brother
can you help me please
i have rangr rover sport 2008
The wire was cut off from connector cluser
can you give me circuit wiring
So that I can return it to connector
thank you
hello friend
here you go
www.lrservice.ru/data/277/RR_SPORT_VIN_147226_OK.pdf
Any problems let me know
Thank you boss 🌹
And you broke the rev, temp and fuel pointer motors... they will never work as they should again. Worth including such information at least in description as that would potentially save many people lots of money..
How would you go about fixing that? Fitting new motors?
@@conkareno yes, replacing them is the only option.
@@PatrykRElektronika thought so. Thanks for the tip.
Broken in what way?
What would I need to avoid? I didn’t see what broke.
Thanks.
@@rajdattani1507 if you pulled out the shafts out of the pointer motors then test them to see if they move smoothly. You'll see what the problem is. In some very rare cases it's not apparent straightaway, they seem to still work but stutter a bit and sometimes won't go back to zero. What to avoid? Removing the pointers at all unless you have a really valid reason but if you do, you should already have experience in removing them without damaging the motors.
🙂
Stupid method.pulled rods and spoiled motors.Just needed to unscrew the arrow anticlockwise
OK I did not realise you could it this way - I have purchased some clocks off ebay and will do a video with this method