GD&T | Geometrical Dimensioning & Tolerancing | MMC LMC & RFS | CNC-Learning | Rajeev Sreedharan

In this video you will learn about Maximum Material Condition & Least Material Condition used in GD&T.
Welcome to CNC-Learning a channel run by Rajeev Sreedharan
This channel is for CNC learning
Please hit like the video and subscribe to this channel for more such videos.
To check your programming skill, you can use the programming test templates available on our website:-cnc-learning.com/
Free CNC Learning

[@ankitpatelab365]

Thanks for the clear video sir. I watched multiple videos but I clarified my misconception from your video only. Thanks a lot.

[@CNCLearning]

Thank you for the compliments

[@Shinchan_editz_55]

sir this video is superb and cleared my doupts. what is my doupt is people saying this is geometrical tolerance but bonus tolerance are given to maximum size of shaft😊, as per name of geometrical tolerance, tolerance are only given to that in positional value but every one is speaking about dimention of shaft, now i have cleared my doupt thank alot sir😊

[@venugopalareddy4049]

Great guidance on GD&T Sir!!

[@CNCLearning]

Thank you Venu for your kind compliments

[@chandruthiru]

Informative and thanks for reminiscence

[@learningcnc]

Nice Video

[@harikumar4757]

Thank very much Rajeev sir,for your cocentric explanation in each sessions.
Have doubt in LMC .While moving from LMC TO MMC , ie 10.1 ,10 ,9.9.So when drilling, to which diameter give more preference or consideration.if it is 10.1 max diameter , can't shift to MMC . Or is it signal don't start at LMC . kindly reply.

[@CNCLearning]

LMC is applied when wall thickness is important or critical. In your example, you get bonus tolerance when hole is 9.9.
So smaller hole is preferable

[@ullasu9116]

Nice video for learning.

[@murugang1275]

👍 Super lecture sir 👌

[@abhijeetyadav3858]

Nice one sir

[@shivanandkadakol5894]

Sir,
Please do more video on GD and T
It's our request...

[@CNCLearning]

Sure Shivanand

[@murugang1275]

🤝 Looking for more video relevant to our field 🤝

[@tawernorang]

Background music ruin the deepth of topic...... Irritating pls avoid.......

[@CNCLearning]

Thanks for the input. Now a days background music is not used

[@WasimAnsari-lo2jz]

Sir please help me. Make a taper thread program for vmc...

[@CNCLearning]

Connect with me on WhatsApp number 9881052446

[@m.j.abilash608]

Sir.make this video in tamil sir.

[@surajpatil1490]

Sir Please remove the background music 🙏
Can't concentrate

[@CNCLearning]

Once loaded, it cannot be removed. Will take care in future