Macro program for Taper bore | 2.5D programming in milling | CNC-Learning | Rajeev Sreedharan

In this video, you will learn, how to make a chamfer or degree in bore and OD.
Welcome to CNC-Learning a channel run by Rajeev Sreedharan
This channel is for CNC learning
Please hit like the video and subscribe to this channel for more such videos.
To check your programming skill, you can use the programming test templates available on our website:-cnc-learning.com/
Free CNC Learning

[@ammaskp5063]

Perfect 💞 excellent 👌🙏🙏🙏🙏🌺 sir 👍 Looking forward to more. 🌺🌼🙏🙏👍

[@ammaskp5063]

Please sir more siemens R, Veriyable program for milling machine 🌼🙏🌻

[@trgtech9269]

I make sprial taper bore but it's not come as per dimension.
Small step come in hole at one side

[@CNCLearning]

If you are using an end mill with corner radius, it need to be compensated with chamfer size and startZ.
Regarding spiral taper bore, I need to know how you have programmed to comment on the step

[@ayisda9883]

Hi Sir do you have macro conversion for FANUC programming for Taper Bore, We have a new DNM 5700 and it runs in FANUC control.

[@CNCLearning]

Right now not available. I will try to make

[@surjyasekhardey5878]

Very good tutorial sir...it is very helpful for me....but one thing I want to know properly ____ the use of " ROUND " ..... when and how to use.....

[@CNCLearning]

ROUND command is used to insert a radius in the intersection point. If your drawing gives intersection, you can use it.
Please note that it is used along with G01

[@surjyasekhardey5878]

@@CNCLearning thankyou Sir...

[@surendramaheshkar2546]

Please hidi me vidio dalo sir

[@pablopablo952]

Great tutorial, very helpful. What if I want to do a chamfer on the square? For example around the square or just on one side only?

[@CNCLearning]

For doing on one side you can use the same program with slight modifications.
For other standard shapes, I will try to make another video

[@dhasaradhan8174]

Sir can you make program for fanuc

[@CNCLearning]

I will try

[@manikandannairkrishnankutt8815]

Cnc collage tvm which place

[@CNCLearning]

Sorry. I do not know

[@atozforyou1397]

Brother can send pdf please

[@CNCLearning]

Sure. Send your email ID

[@atozforyou1397]

Rectangular chamfering macro program need brother

[@CNCLearning]

@@atozforyou1397
ua-cam.com/video/goQFr7edQrQ/v-deo.html

[@sreekanth8254]

Can u send this pdf

[@CNCLearning]

Send your email ID

[@sreekanth8254]

@@CNCLearning send this pdf sir

[@CNCLearning]

@@sreekanth8254 where to send?

[@cibinmathew7075]

How do you know sir the dept of cut
Is 0.15 I think there will be a formula
Please mention the formula sir

[@CNCLearning]

.15 used in this example is by experience. But based on surface finish requirement, you need to adjust the depth of cut. If you plot this on CAD, you can find the cusp height for a specific depth of cut

[@rmnstutus3227]

Osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm