I’m 18 and stated welding when I was 17 your videos helped me through my level one welding course and I was comparable to the people that have been welding for 13 years I love these just have to work on my verticals thank you so much
Doing fillet welds right now, but filling the entire thing up in so many layers. Used 30 rods of 7018 in class today!!! Good video, will help for next time.
Before you start welding, are you drying first your 7018 stick welding? Or direct welding no need to dry? Because whe i use 7018 always not continuesly firing, easy for firing but not continuesly, i test with 4" pipe sch40 with 80A 5G position.
What’s the camera you’re using on your helmet I want to recommend it to some of these other channels it’s so clear and amazing to see it’s so addicting
Hello, Victor!😁😁 Assuming that the amperage is appropriate, the most important thing is the length of the arc. Try to keep the arc as short as possible! Then, if the direction of the welding is from left to right, tilt the angle of the welding rod to the left a little more! Let's hope this helps! thanks for watching!😎😎
Your last pass should be at an angle about 15 degrees off of the bottom plate so your rod is more straight in on the top plate and not a 45 degree angle. This shows the angle of the 3rd pass…ua-cam.com/video/x2dlTqc7SaI/v-deo.htmlsi=Xt-7i9eevoAZyKBk
I’m 18 and stated welding when I was 17 your videos helped me through my level one welding course and I was comparable to the people that have been welding for 13 years I love these just have to work on my verticals thank you so much
Good job, Louise!👍
I will try harder to make a helpful video!
Thanks for watching!😎😎
Doing fillet welds right now, but filling the entire thing up in so many layers. Used 30 rods of 7018 in class today!!! Good video, will help for next time.
Thanks for watching, SmotheredDreams😁
I hope my video helps you!😎😎
it's a very nice looking weld job, thank you for sharing your skills
Hi, Fernando Rivas
Thanks for watching and leaving a comment!
😎😎
World best work keep it up brother
Thanks for sharing your skills for us.
I will continue to try to make good videos for you!
Thanks for watching!😎😎
Im grade 11 strand TVL specific SMAW this video so learned how to weld fillet i like this video thank you much😊
hope things are good man i'm finally going back to work
Thanks for sharing your skills for us.
Good welding 👏👏👏👍🧑🏭🤗
Thanks for watching!😎😎
Before you start welding, are you drying first your 7018 stick welding? Or direct welding no need to dry?
Because whe i use 7018 always not continuesly firing, easy for firing but not continuesly, i test with 4" pipe sch40 with 80A 5G position.
I am having issues with the angle of electrode for the last pass. Pls any tips.
I use 45 and I end up having undercuts
To much angle 15 degrees max
@@mathewoconnor2978Yep.
This guy shows the angle of the third pass…ua-cam.com/video/x2dlTqc7SaI/v-deo.htmlsi=Xt-7i9eevoAZyKBk
Thank you kimchi welder!!!!
Nice video
What is the rod in mm and ampere is written
What’s the camera you’re using on your helmet I want to recommend it to some of these other channels it’s so clear and amazing to see it’s so addicting
Hi Matt! Next time I will ask a friend who helped me set up the camera😎😎
@@kimchiwelder8410 what camera?
Now let’s see if the gages will fit it
thanks for watching! 😎😎
More of this videos its great
Yes, sure. more videos coming.
thanks for watching!😎😎
are you working through union? Looks nice 👍 getting my 2gf flux down, i like to master one before moving on
yup! Thank you for watching😎😎
Is there a way where we u could help me out with this better
I hope my video helped you a little bit
thanks for watching 😎😎
Que oscilación uso????
What is the amp for 3.2 mm
are you in Alberta,?
yes😎😎
Thanks
Show is a start/stop please. Thank you.
Make more good job
sure!
thanks for watching!
Really, REALLY need to get those toes cleaned out prior to another bead pass. Way too many discontinuities and inclusions as a result.
God job ❤
nice mehran from iran
Why did you not clean all slag off before you started the second and third weld if that was a b3nd test it would cause serious problems
You're right.
If we're going to do a bending test,
we have to keep it clean!
thanks for watching!😎😎
@@kimchiwelder8410 been teaching young minds for 7 years now and did powerplants and pipeline for 20 years
@@monroesweldingservices6234 Wow,
You have a great experience!👍👍
👍
thanks for watching👍👍
Ok😉
PSI
I am having issues with the angle of electrode for the last pass. Pls any tips.
I use 45 and I end up having undercuts
Hello, Victor!😁😁
Assuming that the amperage is appropriate,
the most important thing is the length of the arc.
Try to keep the arc as short as possible!
Then, if the direction of the welding is from left to right, tilt the angle of the welding rod to the left a little more!
Let's hope this helps!
thanks for watching!😎😎
Your last pass should be at an angle about 15 degrees off of the bottom plate so your rod is more straight in on the top plate and not a 45 degree angle.
This shows the angle of the 3rd pass…ua-cam.com/video/x2dlTqc7SaI/v-deo.htmlsi=Xt-7i9eevoAZyKBk