It's a cool tool! It works best with .018-.019 wire but we've made it work with other sizes. Not sure about cord because it would have to be pretty tiny but it's worth a shot!
You have the best ideas, thank you very much, I would like to know how can you make a multi wrap bracelet for someone else as a gift, I’ve made some for my sisters and I’ve measured their wrists and made adjustments for the clasps, but then they are either to tight or way to loose! Help!
Oh, it's so tricky sometimes, isn't it... my best advice is to finish the wrap bracelet a little short with a lobster clasp and a bit of chain so that they can adjust it. Thanks so much for your kind words!
I definitely prefer the comfort of the 4mm Firepolish but 4mm bicones would work as well! A TON of our shoppers have made these bracelets with 4mm Swarovski bicones and they are gorgeous!
Add a connecting chain. They do make non-magnetic chain. Also this is such a long bracelet, I think you would notice that it came undone before it fell off.
A safety chain is a great idea, as suggested by Denise, however with magnets, it’s usually the case that you get what you pay for. They don’t really come in strengths, per se, but if you’re purchasing in-store, you can test how strong they are. If you don’t have a bead store in your area and you’re purchasing online, it’s a good idea to purchase from a reputable source. Even then, magnetic clasps should be limited to light weight projects. This project is extremely light weight and would take forever to work its way off so we’re very confident with our strong magnetic clasps for this bracelet project. Hope that answers some questions! We’re about to add our full line of magnet clasps to www.beadplace.net and we only carry the good ones. 😜
Hi Abbi.. such a cute bracelet. Thank you for sharing. I have a question you've probably heard a hundred times. I have the Magic Crimper and I bought the tubes that came with it also but what happens is the first time I squeeze it and it looks like a ravioli it's tight, but, when I continue to go around the bead to make it round by the time I get finished the crimp is loose and it comes off. Any idea what I am doing wrong? I have tried so many times and it's really frustrating, to say the least!
Janet Pitzner Thanks! Crimps came with your crimper? Where did you buy it? I’m wondering if they aren’t the right crimps for the tool. Otherwise, it’s the wire size. What specific wire brand and size are you using?
@@AbbiBerta yes it's the crimps that came with the crimper and they're 2x 2 mm tubes and the wire that was recommended was flex-rite 49 strand. I've also tried 19 strand Beadalon wire. I've used pretty much every kind of wire and I just can't get it to work on any of it
Where did you purchase your tool and crimps? Crimps don’t usually come with the crimper. I’d like to check it out so I can see what the problem might be. Sounds like it could be poor quality crimps then at this point. Not sure.
@@AbbiBerta thanks Abbi.. I actually got them from an Etsy store and I'm not at my computer right now so let me get home and check and I will let you know. I don't think that the crimps actually came with the tool. I believe it said they were made for the tool and I ordered them at the same time I ordered the tool but let me check and get back to you ok?
I'm definitely going to make this bracelet. I love this design and the beautiful beads. Tyfs
Love the bracelet. I did not know that there were two sizes of the magic crimper. Thanks for the info!!
Thank you for always explaining the projects so well!
Your tutorials are fantastic!
I love your videos and this bracelet is awesome! You give very clear instructions thanks for sharing your knowledge. ✌
Thanks so much!
WoW, is that bracelet beautiful!! Thanku ♡
Thank you so much! You always make things look so easy and they really are!!!
Abbi, you do a terrific job with these videos. Very clear with tons of info.
Thanks so much! That means a lot!
I love your videos you make it looks so easy 👍
Glad you like them! Thanks!
Can not wait to try! Thank you for sharing.
Thanks for watching!
Love watching the tutorials. I always learn so much. Thanks for sharing! 😊
Thank you! I'm so glad to hear it!
Great video, as usual. Thanks for the clear and concise instructions. You are awesome!
Thank you so much!
Very cute !! I'm gonna try to make one soon...thanks for sharing!
Glad to hear it! Thanks!
I never order kits but I ordered this one. Thanks!
Thank you! Glad you like it!
So to put this bracelet on do you have to wrap it around each time you wear it. I love the tutorial on how to make it . Thank you
Beautiful bracelet and excellent instructions as usual💗
Thank you!
Thank you very much. You're professional ♡♡♡♡♡☆☆☆☆☆
Thank you!
Pretty
I love this!!
Thanks!
I'm so glad your back. Thanks for the tutorial. Love it. Just made my life simple. ❤❤❤
Thank you!
Love this bracelet, thanks for sharing!!! :)
Thanks for watching!
I love the look of the bracelet, however, I have a latex (rubber) allergy. Is there silicone tubing?
Gracias x compartir...hermooosa pulsera
Gracias!
love the bracelet.
Thanks!
Oh my goodness! I just found out, from this video, your store is just 18 miles from me!!! Oh boy!🥰
How cool! Yep, we're just outside of St. Louis! Maybe I'll get a chance to meet you some day! Thanks for all of your support, Nancy!
Love this tutorial ♡
Thank you!
How would you size these bracelets from small to large?
I love this crimper. Does anyone know if this only works with wire? How about cording?
It's a cool tool! It works best with .018-.019 wire but we've made it work with other sizes. Not sure about cord because it would have to be pretty tiny but it's worth a shot!
You have the best ideas, thank you very much, I would like to know how can you make a multi wrap bracelet for someone else as a gift, I’ve made some for my sisters and I’ve measured their wrists and made adjustments for the clasps, but then they are either to tight or way to loose! Help!
Oh, it's so tricky sometimes, isn't it... my best advice is to finish the wrap bracelet a little short with a lobster clasp and a bit of chain so that they can adjust it. Thanks so much for your kind words!
Would 4 mm bicones work or should the 4mm beads be round?
I definitely prefer the comfort of the 4mm Firepolish but 4mm bicones would work as well! A TON of our shoppers have made these bracelets with 4mm Swarovski bicones and they are gorgeous!
Beautiful!!!!! I have to check your place to get some beads. Thanks for sharing 😘👏👍
Thanks!
That was awesome! Thanks for sharing this video!
Thanks for watching!
Wow it is beautiful. I wish i can make it in all different colors
Thank you!
Beautiful!!❤
Thanks!
Very cute!! Thanks for sharing your awesome designs!! Love your videos!! 😍😬
Thanks so much!
Excellent love this !
Thank you!
I am leary of magnetic closures because I have lost jewelry due to magnets not being strong enough. Is there a strength I should purchase?
Add a connecting chain. They do make non-magnetic chain. Also this is such a long bracelet, I think you would notice that it came undone before it fell off.
A safety chain is a great idea, as suggested by Denise, however with magnets, it’s usually the case that you get what you pay for. They don’t really come in strengths, per se, but if you’re purchasing in-store, you can test how strong they are. If you don’t have a bead store in your area and you’re purchasing online, it’s a good idea to purchase from a reputable source. Even then, magnetic clasps should be limited to light weight projects. This project is extremely light weight and would take forever to work its way off so we’re very confident with our strong magnetic clasps for this bracelet project. Hope that answers some questions! We’re about to add our full line of magnet clasps to www.beadplace.net and we only carry the good ones. 😜
Abbi Berta thanks so much
Hi Abbi.. such a cute bracelet. Thank you for sharing. I have a question you've probably heard a hundred times. I have the Magic Crimper and I bought the tubes that came with it also but what happens is the first time I squeeze it and it looks like a ravioli it's tight, but, when I continue to go around the bead to make it round by the time I get finished the crimp is loose and it comes off. Any idea what I am doing wrong? I have tried so many times and it's really frustrating, to say the least!
Janet Pitzner Thanks! Crimps came with your crimper? Where did you buy it? I’m wondering if they aren’t the right crimps for the tool. Otherwise, it’s the wire size. What specific wire brand and size are you using?
@@AbbiBerta yes it's the crimps that came with the crimper and they're 2x 2 mm tubes and the wire that was recommended was flex-rite 49 strand. I've also tried 19 strand Beadalon wire. I've used pretty much every kind of wire and I just can't get it to work on any of it
Where did you purchase your tool and crimps? Crimps don’t usually come with the crimper. I’d like to check it out so I can see what the problem might be. Sounds like it could be poor quality crimps then at this point. Not sure.
@@AbbiBerta thanks Abbi.. I actually got them from an Etsy store and I'm not at my computer right now so let me get home and check and I will let you know. I don't think that the crimps actually came with the tool. I believe it said they were made for the tool and I ordered them at the same time I ordered the tool but let me check and get back to you ok?
I'll be home in about an hour
nice as well!!! love it! :o)
Francine Deneault thanks!
❤️
❤️
The