How To Replace Your 2006-2010 Dodge Charger Front Fender
Вставка
- Опубліковано 7 вер 2024
- This video shows how to remove and replace your front fender on a 2006-2010 Dodge Charger.
Link to purchase a new passenger side fender: amzn.to/3SQquFj
Link to purchase a new driver side fender: amzn.to/3SRm1SK
Tools you need are: 10mm socket, ratchet & extension, and a flathead screwdriver (or pry tools).
Video on how to remove a 2006-2010 Dodge Charger front bumper: • How To Remove Your 200...
If you need a pry tool set, here is a link purchase: amzn.to/3MQ5dXl
If this video helped, be sure to leave a thumbs up and subscribe to our channel for more videos. Thank you!
Our website: www.martinsuse...
Facebook: / martinsusedcarsllc
Twitter: / martinscarsllc
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.
Martin, your videos are excellent. I just came back from the junk yard and was able to get all the parts I needed after learning how to take them off because of your videos. Thanks a bunch for helping others save money.
Man did a whole fender $100 job in 5 minutes 😮
Thanks for showing how to remove the bumper and fender, that helped me a lot!
simple and too the point, well done, thanks.
Chrysler 300s05-10 almost the exact same if you guys are wondering
Thank yooooouuu for teaching me!
Great video man thanks
I seen that cut
Can you do a challenger fender and door ???? That would help
How about the ones that are bolted to the brackets inside the the panel?
We show that at the 1:40 mark. You also have to remove the two screws attached to the bumper. We also have a video on how to remove the bumper.
Is it that hard to align those fenders?
Great vid, straight to it, but does this work on the 2011 Charger?
Can you replace the rear panel near the gas tank?
Thank you.
Similar for the avenger I’m assuming?
Hello. I have a 2007 dodge charger srt8. I took the front bumper off with no problem... installing it is a pain. Do I install it my putting one side on first or installing it with both sides simultaneously? Thank you
Is it the same for 2016+ challengers?
thanks!
Do you have to remove the bumper to remove the fender? Thanks!
Great video
You have to remove the bolts that attach to the bumper.
Perfect 💪🏾💪🏾💪🏾
Is this almost similar for 2010 Challengers? Thanks for the informative video.
Possibly. I have not changed a front fender on a Challenger, but I assume it would be a similar process.
Very nice video 👌 new Sub
Any word on how to remove the door by chance?
do you know if this fender will fit a gen 7 charger?
It is different from a Gen-7 Charger. Look on eBay for the exact part that will fit your Charger.
Is it necessary to remove the bumper to get to the screws that connect to the fender??
No, you do not have to remove the front bumper. Just the two screws that attach to the bumper from the fender. We were replacing our bumper so we just kept it off to remove the fender.
@@MartinsUsedCarsCollectiblesLLC thank you.. big help
Does the hemi emblem come separate?
Yes.
If the top screws aren’t backing out, does that mean their stripped
Probably
What's the name of that trim piece under the fender?
I think it’s called the bottom outer liner
Would this be similar on a 2015 Charger?
yes
What's the piece called at the bottom of the fender? I have to replace on my 2010 Charger but I don't know what it's called!
Have you found out what it's called? I need it too
@@jurnagin no not yet!
@@CIE504 Il go by a body shop, they can look it up
Are you talking about the fender well liner?
@@SLYDABS Going straight down from the Hemi badge on the fender its a piece that slides in right underneath the fender and attached at bottom of the inner liner
Thank you sir !!! Great vid !!!