The best way to remove the 2 nuts in the last step before removing the bumper cover is to use the following: drill, flexible shaft drill bit extension, socket adapter and a 10mm socket. 3:22-4:03. You can get it between the inner liner and bumper cover opening.
You don’t have take off bumper. To change bulbs just turn wheel and pull the cover off a bit that’s what I did. If you want to replace the fog light lens just remove tire for more space much easier than removing whole bumper
Did you use the harness assembly that came with the new fog lights or did you just plug them into regular ones ? And what did you wire the LED lights to on the existing wires ?
i replaced mine but there is a gap in the inside corner thats a bit too much for my taste. the three holes on the light lined up fine but its still a bit distracting on the passenger side .
Hi, I have a 2010 Dodge Challenger with fog lights. The OEM lenses on mine are all clouded up and scuffed with road rash like the ones you took off your Charger. Is there any way to order just the lenses from Chrysler and replace just the lenses leaving the original housing in place?????
Ronny Paul no. Even if there was they would likely leak. I have a Tacoma I’ve been messing with trying to get them to stop leaking. The only real way to do it is replace the entire assembly which includes the lens thanks for the comment hope that help!
If I remember correctly it’s slides in pretty straight without any hangups however you do have to bend it out around the edges but it should push in if it doesn’t push and then there’s something in the way.
These should fit: Alla Lighting H10 LED Fog Light Bulb, 9145 9140 9040 9045 ETI 56-SMD 3800 Lumens Extremely Super Bright Cars Trucks 9145 CANBUS LED Lights, 6000K Xenon White www.amazon.com/dp/B07GT9PJXH/ref=cm_sw_r_cp_api_i_ceHYDbPM19TP0
Hi there I have a question for you maybe you could help me out I have a 2010 Dodge Charger just a standard charger it does not have fog lights. I'm looking to install some new ones is there any sort of housing that I need to buy or can I simply just buy a set off eBay that has the black bracket like in your video? And I also noticed that it appears that they are 9005 bulbs whereas what I was looking at was a LED bulb that I can install? Any help would be greatly appreciated as well as the wiring will it be there or why I have to wire them by myself? Thanks so much
Nice tutorial on the Charger Bumper removal, best one on UA-cam. Thanks
Thanks!
I was hesitant to do this until i seen this video , Thanks
JJD1913 thanks!!
Keep making videos.. they are very informative
Thank you!!
The best way to remove the 2 nuts in the last step before removing the bumper cover is to use the following: drill, flexible shaft drill bit extension, socket adapter and a 10mm socket. 3:22-4:03. You can get it between the inner liner and bumper cover opening.
Thanks
AWESOME JOB BRO .. very informational .. just bought a 2006 Dodge R/T Daytona . Trying to get different ideas
Crimzon R thank you! Good luck with the new ride!!
@@bobbygfl thanx .. absolutely love it
there is no such thing as a 2004 dodge charger that is a 2006
ryan weisbrich yes, my mistake. I was not sure on the year and mixed up my cars.
It's all good but yea they made the charger from 2006 and up
ryan weisbrich right 2006-2010's have the similar grill
You don’t have take off bumper. To change bulbs just turn wheel and pull the cover off a bit that’s what I did. If you want to replace the fog light lens just remove tire for more space much easier than removing whole bumper
Edward Vasquez much easier. Thanks for the comment!
Thanks for the video, this was such a huge help!
Dugie555 thanks for the comment!
Did you use the harness assembly that came with the new fog lights or did you just plug them into regular ones ? And what did you wire the LED lights to on the existing wires ?
I rewired the existing harness to fit the new bulbs.
Very informative video. Do you have to take the bumper cover off to replace the fog light bulbs or can you just remove the skid plate on the front?
Clark Bubar I could not see a way to do it without removing. Zero clearance
Clark Bubar you can change the bulbs from below just have to jack the car up some not hard at all...
i replaced mine but there is a gap in the inside corner thats a bit too much for my taste. the three holes on the light lined up fine but its still a bit distracting on the passenger side .
Thanks
Hi, I have a 2010 Dodge Challenger with fog lights. The OEM lenses on mine are all clouded up and scuffed with road rash like the ones you took off your Charger. Is there any way to order just the lenses from Chrysler and replace just the lenses leaving the original housing in place?????
Ronny Paul no. Even if there was they would likely leak. I have a Tacoma I’ve been messing with trying to get them to stop leaking. The only real way to do it is replace the entire assembly which includes the lens thanks for the comment hope that help!
Mine after market fogs didn’t fit like the connect to the wires don’t match
I’ve run into that and had to cut in new quick connects.
Could you please send links to the stuff you purchased for this modification? Thanks
Thanks. Probably not available any more
When installing this front bumper cover.... should the bumper fit right in without any resistance??
If I remember correctly it’s slides in pretty straight without any hangups however you do have to bend it out around the edges but it should push in if it doesn’t push and then there’s something in the way.
@@bobbygfl thank u
What size are those fog lights ..will a 3" fit for the fog lights .. didn't want to get the wrong size
From memory they are about 4 inches. I’d say three will fit for sure.
I bought those same fog lights and they came with bulbs that don't fit!!!! What size are in yours? So I know what to order I'd light to get led ones
These should fit: Alla Lighting H10 LED Fog Light Bulb, 9145 9140 9040 9045 ETI 56-SMD 3800 Lumens Extremely Super Bright Cars Trucks 9145 CANBUS LED Lights, 6000K Xenon White www.amazon.com/dp/B07GT9PJXH/ref=cm_sw_r_cp_api_i_ceHYDbPM19TP0
Thank you for the great info!! This was super helpful..
didnt know they made chargers in 04 thought it was only 06 and up
+Cris_M_17 yes. I blew it on the year. Thanks
Hi there I have a question for you maybe you could help me out I have a 2010 Dodge Charger just a standard charger it does not have fog lights. I'm looking to install some new ones is there any sort of housing that I need to buy or can I simply just buy a set off eBay that has the black bracket like in your video? And I also noticed that it appears that they are 9005 bulbs whereas what I was looking at was a LED bulb that I can install? Any help would be greatly appreciated as well as the wiring will it be there or why I have to wire them by myself? Thanks so much
James stewart hi. Likely you’ll need more than just the lights. You’ll need the housing bracket and complete wiring. Also a switch. Pretty big job.
great job
Thanks
Chargers started at 2006 great video though
Robert McCabe I know! I wish I could go back and put a message over the top that says that I screwed up the year. Thank you!!
Where did you purchased headlights and fog lights can you email me the link?
??
Amazon and likely no longer available. Sorry
What year charger is urs
I believe this was a 2008. From 2006 to 2008 they are the same.
انا عراقي ولايوجد انوار اماميه لسيارتي في بلدي كيف استطيع الحصول عليها من امريكا
Thanks
wjat are the bulbs length?
About 5”
TWO THOUSAND FOUR!?!???!!????!!????
NATE DAWG I know!
what is the name of that tool?
GreywolfStudios74 just search for door trim removal tool. Amazon has a large selection.
They didn't make dodge chargers in 2004
Yep, my bad
Dude U have to show a beginner every step. Couldn't catch everything...
Ken Bishop sorry!
04......? Ok
Thanks
wtf is a 2004 charger
Scufyy McGruffy I know, I know. Mis-spoke