Це відео не доступне.
Перепрошуємо.
HOW TO FIX PAINT RUNS
Вставка
- Опубліковано 8 сер 2024
- All buffing compounds can be found at www.speedokote.com
All mark1 refinish products are subscriber exclusive only and can be ordered directly from me
SHINE PACK 119.99
FOR ORDERS ONLY Cash2kcars@gmail.com
QUESTIONS POST BELOW
Love the vids, love the intro, love the work u do for the autobody community ❤️, gives me motivation to continue
Thanks man!
I think you made a good point about the coats of clear. One thing I read is supposedly the 1980s Volvos back in the days of lacquer paint jobs, put 10-12 coats of lacquer on, and those paint jobs were great because they could be polished out like that forever, compared to modern base/clear jobs.
Yup!!
The man is back with another one
Trying! 😂😂
BACK WITH ANOTHER SCREW UP
ANOTHER ONE (DJ KHALED VOICE 😂)
@@speedokoterefinishnetwork4937 i happy you uploaded.
You are a magician Marco! You do excellent work my Brother
I appreciate it man. This was just a demonstrational video.
Real world I would have cut it down more and gotten it flatter
That’s cool. Making a video of painting a car then able to make another video fixing the mistakes. Love this channel hope to meet you soon I’m a fan gonna have to get that Mark1 setup 🇺🇸
Heck yes. Join my auto body class and hang with me one on one for a week
Marco. For a spray can job I would have left the run in it. 😅 Looks better than most guys using exspensive base clear for their paint jobs. Nice work as always!
True😂 then I could have just flaunted the flaws and really wear the badge of honor for "hey it's a budget job"
That paint job came out so good. I love this channel very educational.
Thanks! It came out good enough for us for a little fart can spray job 😂😂😂
@@speedokoterefinishnetwork4937 🤣🤣🤣
Is this with the clear coat or no? Got one on my second coat of painting so I left it
I started using the 3m quick change double sided wool pad(6 inch ) for initial buffing using yer grampa's rotary. Nothing cuts as fast, and i don't make squat buffing, so I need fast. Then comes the Hercules dual action with foam pads for stage 2 and 3 . Sometimes i just stop at the machine polish and call it good
If herd of A LOT of guys doing this. Rotary for the cut, dual action for final polish.
Another great video. Thank you 😊
Thanks!
SPEEDOOO.....!!!!!!! was doing the exact thing last Friday..... had some pinholes (they are the worst) but all went well after a quick rotory polisher session
Yea ! Rotary I never use anymore but I will say they are cheap
@@speedokoterefinishnetwork4937 yea and that's the other reason cause at the time I was learning didnt have any money to buy a polisher and I was gifted that one. 6 years and still running like brand new changes the brushes onces
Marco. You’re right. On my old accord. One of my first paint jobs only had 2 coats of clear and I had to cut it way down because it was in the garage, anyways few years later and it needed a paint job.
Yea I can't stress it enough you have to have enough material to be able to go ahead and cut it back down. Even two coats With smr42 which is one of the thickest clears on the market I don't feel ok at 2 coats. Some guys get lucky if it's a garage kept car.
@@speedokoterefinishnetwork4937 yup! You’ll see that project on the channel eventually
Btw I'm sure you died watching us rattle can this thing. What a joke 😂😂😂
We had fun though
@@PaintSociety I'm excited!!!!
@@speedokoterefinishnetwork4937 I was just thinking how much your finger hurt lol.
im pretty sure you are doing what you are charging for/ getting paid to do,it looks good to me,those are not show cars in these vids, keep making great vids man,I enjoy them
Yes I agree. My blue civic I was aiming for more quality but the rest of the cars iv done this year were just scratch and spray clean up jobs. Very satisfying because it's like one week in and out and boom you have a fresh looking car.
@@speedokoterefinishnetwork4937 I used to do that in the 90's with acrylic enamel and a binks mod 7,ahh to be young again
Excellent video like all of your videos yes I am interested in the Mark 1 finishing kit how can I get it brother.
It's email to order
Please email when your 100% ready to order as my email is for orders only
Cash2kcars@gmail.com
Can’t one sand it down flat , and repaint and clear?
you should get yourself a cheapy harbor freight lift..you can put the car up at a good height and sand buff polish sitting down with comfort ..and are great for detailing the car inside or out
We got something coming..
I admire your style man f*** what people say or think get money go home and be happy!!!
Exactly what I do every day. 😂😂😂
Great job teacher
Appreciate it!
Another great vid!
Thanks!
Hello,
Thank you for this video! Very informative. I wanted to ask, as it's burning for me. How can you know by eye if the run is in the clear or in the base coat? On my car I have a run, and now I wonder: Is this the clear coat of base.
A friend told me is like 99% clear, as the base is a thinner layer then the clear coat. So less chance of running.
Pretty easy if it's a metallic color just look and see if there is a build up of metallic around the run area . Solid colors are where it gets tricky
@@speedokoterefinishnetwork4937 Hey thanks! So I have a metallic blue. So if the run is is metallically then its the base. If the color looks the same then its clear?
Marco! Need that color code .already ordered the 42 clear. What is that powder blue?
There is no paint code for rustoleum
Where are you located ?
Hello, I have another question yet again ,, 🤦🏼♂️. My question is , I’m painting a valve cover that’s sprayed with dupli-color engine enamel already that is silver ,,, Can I paint a acrylic enamel single stage paint over the top of it , or what do you suggest be the best option,, thanks
Yea you could just scuff what's that's and lay a little paint over it
@@speedokoterefinishnetwork4937 that’s awesome news thanks once again , you’re the man 🫡🤙🏽
Have you tried the razor blade method .
Yes a few times. It's not bad I just don't do it all the time
side panels are less likely to fail from UV damage. I wouldn't worry too much about sanding a run on a vertical surface.
It's mostly always the top horizontal surfaces that need thick clear coat. Keep a car waxed and sealed regularly, and the clear coat should have max life.
I've sealed my car for 17 years, and it's parked outside 24/7 in socal, and the clear coat has not peeled off yet.
Nice !
Hey how do i get ahold of you i just watched your atv video do you still paint thrm for people
I paint for the general public yes. I charge 10$ for an estimate.
Can get a hold of me at cash2kcars@gmail.com
How much product on panel is not just # of coats..also spray gun...some hose it on with effeciency.
100%% agree
Have you done a silver paint job using speedokote
Never however will in the future
@@speedokoterefinishnetwork4937 thanks I can't wait
Use wax and grease remove to sand with it gets the run look out after run file and raiser blade it
Very interesting haven't heard this
Anothuh one! 💪💪💪
😂😂😂😂
TriggerMan the paint channel has a video on how to use a razor blade to scrape run out then buzz it with 1000 and so on. Thats how I do it with runs and big pieces of dirt before wet sanding. It helps knock down the bulk of the imperfections with out sanding surrounding area. . It sounds crazy. That car is a beautiful blue!
He's amazing. I watched him. I use to do that as well
I dont like razor on runs when paint is still soft. Best thing ive seen is a tungsten cube. They cost about 100 dollars Australian. I am yet to try one out but i watched a video about it an was very impressed. I will be getting one as soon as i get back into spraying
@@edwardbayley1842 that's the issue iv ran into is that razor pulls pretty hard on the material. And one time I had the clear coat completely pull off the surface 😂
I think with the tungsten carbide cube you can gently push scrape at the run and the flat holds it perfectly 90° to the panel
Id want to try it with a little dish soap on fresh clear
You can take a razor blade. And take a pice of tape on both sides. Lay it flat. And cut the run out. 😊
It does work
Put the link in so we can click on it and ordee it.
www.speedokote.com for paint
The shine pack is email to order
cash2kcars@gmail.com
Totally agree a lot of B/S out there.......
Yea honestly there was never any certified "ceramic coat " Installers before 2015. It was just detailing and if you wanted a really good buff everyone just went to a body shop.
Times have changed 😂 you now have to be certified to apply some corny new type of wax.
Runs are super!!!! Easy!!!! 1500 then 3000 then 5000.... know the 5000 is over kill but spectacular results 😊😊😊 easy to polish .. ...🎉🎉🎉 looks wonder i like it. I prefer.. rotory just old school and am just 28
Yup
Will this take care of orange peel too then?
Niceeeeeee
Thanks
100% agree! These companies are alllll about marketing!
“Ohhh it’s a 5yr coating….you just gotta make sure to do a maintenance wash every six months with our signature ceramic booster”
🙈
So you’re saying it’s the booster that lasts 5 years 😂
It’s not rocket science! Like Brian says “it’s just paint. Don’t over think it!”
Yup agree lol.
My coating lasts 1-3 years depending on conditions.
It's a cheap diy kit.
😎👍
☺
👍🏽
Good to see you back
man, some viewers have eagle eyes.
Agree 😂
Let it dry for a couple of months then go over the whole car with 600 then flow coat it with another coat of clear
Exactly what I was thinking
@speedokoterefinishnetwork4937 i really love your channel. Ive learnt alot from watching you also watch brian from ps and a few others including some custom Asian guys. Ive been a mechanic in Australia for 20 orso years. Always was trying to do my own touch ups and resprays. Having so many different teachers on youtube allows me to paint to every condition and when i do a job i can plan it out depending on what its worth and whos voice is going to guide me through the job step by step inside my head. I can now do most paint jobs with ease and have been doing some very impressive work. I can also work faster than most professional guys i know because i understand what corners i should and shouldn't cut depending on the results im trying to achieve.
@@edwardbayley1842 wow awesome!
👍🏾👍🏾👍🏾
Sweet recovery!!! Can you send me a link to all the products you use, wax compound, polish, and pads? Thank you!
Hey man it's all on speedokote website under detail products
@speedokoterefinishnetwork4937
Thanks for the info. I will be getting some items
Oh dammm
Yeaaaa...
Hi bro i need job i.m 11 years excepat
Your in pa?
@@speedokoterefinishnetwork4937 my passport Bangladeshi still now baharain 11years
I am in USA
@@speedokoterefinishnetwork4937 how to apllay
Hi boss car bode damaj dor look bampar opne fit gase wolednge gelass opan. Fybar.... Sperya panthe experience me
no thanks.
No one cares . But thanks