Hello Scha, thanks for your comment. We have a lot more content that might be useful to you at omega.com on our resources pages. Here is a link: www.omega.com/en-us/resources
So pulling a gage up with tape does not affect it at all? I would think it to be much more sensitive if you have to measure changes in force using the bridge on the gage. How much force can a strain gage actually withstand before it’s suspected?
Sir if i have to calculate bending moment from strain time history calculate from strain gauges how to calculate that for a rectangular cross section in plane strain condition
May i know, how can i know more about behaviour of strain gauges at low temperature? What are the installation procedure to be considered at low temperature?
we wanted to collect vibrational data from the strain gauge and feed it to NI DAQ. my question is which type of strain gauge should we use and with which amplifier module. Thanks in anticipation !
Hello and thanks for your question... You can send an email to: pressure@omega.com with your inquiry and one of our pressure/strain and force experts will be happy to assist you.
The proper glue to use is called M-Bond 200 & it's used with a 200 catalyst. I wouldn't trust normal super glue - it's essential the gauge is properly bonded to the surface, else the data will be meaningless
Hello Ciksu, here is the omega.com page showing pricing for pre-wired KFH strain gauges: www.omega.com/en-us/force-strain-measurement/strain-gauges/linear-strain-gauges/kfh-linear/p/KFH-1-5-120-C1-11L1M2R
So, I'm going through online classes with no skill and experience. You help me a lot. Thank you!
Hello Scha, thanks for your comment. We have a lot more content that might be useful to you at omega.com on our resources pages. Here is a link: www.omega.com/en-us/resources
Is there a limitation on the number of strain gauges that can be installed on a stirrup or hoop?
So pulling a gage up with tape does not affect it at all? I would think it to be much more sensitive if you have to measure changes in force using the bridge on the gage. How much force can a strain gage actually withstand before it’s suspected?
I have a question: If he has a ruler made of aluminum or iron, should I clean the ruler with 80 grains of silicon carbide before applying strain?
What kind of tape did you use?
Sir if i have to calculate bending moment from strain time history calculate from strain gauges how to calculate that for a rectangular cross section in plane strain condition
How I can solder the gauge wires. They are so thin. I have tried to solder at low heats but that was not working
May i know, how can i know more about behaviour of strain gauges at low temperature?
What are the installation procedure to be considered at low temperature?
we wanted to collect vibrational data from the strain gauge and feed it to NI DAQ.
my question is which type of strain gauge should we use and with which amplifier module.
Thanks in anticipation !
Hello and thanks for your question... You can send an email to: pressure@omega.com with your inquiry and one of our pressure/strain and force experts will be happy to assist you.
Would you be able to tell me the maximum temperature the SG401 adhesive can withstand? I've gotten contradicting answers. Thank you.
Sir I have to measure the pressure applied by the tail stock of the Lathe on the specimen clamped in the chuck. What type of Strain Can I use?
Dear Asif good question! You can get more in-depth answers from one of our Pressure Engineering Experts by emailing: pressure@omega.com
Is there a machine to paste strain gage automatically??
You appeared to apply cleaner to un bonded top side of the strain gauge. Puzzling.
Hey dear this is Sadique here from Mumbai India
I am doing modulus of elasticity test by the use of strain gauge could you please help me ❤️
What kind of glue do you use? is it glue for eyelashes? Thanks
The proper glue to use is called M-Bond 200 & it's used with a 200 catalyst. I wouldn't trust normal super glue - it's essential the gauge is properly bonded to the surface, else the data will be meaningless
Bro where can I get that adhesive in India @@MrBassman91
How much KFH pre wired strain gauge is?
Hello Ciksu, here is the omega.com page showing pricing for pre-wired KFH strain gauges: www.omega.com/en-us/force-strain-measurement/strain-gauges/linear-strain-gauges/kfh-linear/p/KFH-1-5-120-C1-11L1M2R