Hey Marcel, you've done a few great tutorials on the Crane 2S! Thanks for taking time to do them. Watched them all a couple of times, very helpful. Thanks again :-)
Do you have to do this every time you remove the camera for stills. Say at a wedding using the same camera will you have to balance everything again to begin shooting the video. just thinking about preparation time
Hi. Does anyone know what the blinking orange LED inside the "USB-C Camera Control" and "Focus/Zoom Control" connectors on the Crane 2S means? I have seen that it flashes at different speeds, depending on the way we use the Crane 2S, be it PF, POV, etc... but it is a light that is hardly visible, since it is very dim, and also, It's inside the connectors.
hello friend, could you show your settings for smoothness, dead zone and other indicators, I would be grateful for a screenshot of your smoothness settings
Omg i just saw wait he has sigma 18-35 and he uses e - focus , maybe just maybe it works with mine as well,and woholaa - IT WORKS , until i get real focus , this is awesome ( its really fast tho but i cant complain )
Just got the Crane 2S. I have a Nikon D810 - and I simply can't get the camera control to function properly. The LV (on gimbal) doesn't put the camera into LV mode and the gimbal can't figure out when I have the camera in video mode - hence the video trigger simply doesn't function. Another annoying thing is, I simply can't set the ISO (even when I should be able to). I have upgraded to the latest firmware - so what am I doing wrong?
Hey Marcel. Thank you for everything that you do. There's a problem I am facing. When i press the auto calibrate feature, the gimbal does a few things and vibrates and then never stops vibrating. I changed the motor to high because I am using a heavy camera, the gimbal is just vibrating now each time i put it on. What should I do? Thank you so much
just sell the gimbal bro. i used this gimbal for 3 years it is very strong but the quality and support is very bad, I had to change my USB board because it fried for no reason, then last month my tilt motor board got damaged again all of a sudden. and now when I finally got it back after repair its vibrating like carzy all because I accidently hit the auto calibrate.
Great video!! I get this gimbal but when i film for a long period of time the gimbal is never perfectly stable, footages seems to be a little shaky. (is perfeclty balance) Any settings to make it smoother on the movements and more stable? Thanks!
hi, depends sometimes also on the type of shot, different modes work for different scenarios better or worse. For that I soon will upload a tutorial on it. But generally speaking, you could increase the smoothness a bit and also check one more time your cam package if it has lens support on.
hi for that you can go to their website and check their compatibility list. There you can find an exact list which shows which features are available. I personally haven't used the bmpcc with the controls on this gimbal. So can't say for sure
Finally a video that explains into detail what the menu functions do.. Thankyou!!!
Hey Marcel, you've done a few great tutorials on the Crane 2S! Thanks for taking time to do them. Watched them all a couple of times, very helpful. Thanks again :-)
thank you
Tell me How can I control my a7III camera settings (ISO Speed Aperture) with this gimbal ??
Can you add 2 focus/zoom modules on crane 2s at the same time? Because I see there are two usb-c slots on the gimbal.
The auto motor calibration doesnt work. It just makes the axis lock and grind the motor
Do you have to do this every time you remove the camera for stills. Say at a wedding using the same camera will you have to balance everything again to begin shooting the video. just thinking about preparation time
Hi. Does anyone know what the blinking orange LED inside the "USB-C Camera Control" and "Focus/Zoom Control" connectors on the Crane 2S means? I have seen that it flashes at different speeds, depending on the way we use the Crane 2S, be it PF, POV, etc... but it is a light that is hardly visible, since it is very dim, and also, It's inside the connectors.
hello friend, could you show your settings for smoothness, dead zone and other indicators, I would be grateful for a screenshot of your smoothness settings
Hi bro your amazing i have a question how i can connect my canon 5d mark 4 to carne 2s i can't control the camera from the gimbal
Does the joystick has a control of start stop of video operations of canon 5d mk4 camera ?
Omg i just saw wait he has sigma 18-35 and he uses e - focus , maybe just maybe it works with mine as well,and woholaa - IT WORKS , until i get real focus , this is awesome ( its really fast tho but i cant complain )
Hi, My Nikon live view is not working when connected to crane 2s. How can I fix it?
Just got the Crane 2S. I have a Nikon D810 - and I simply can't get the camera control to function properly. The LV (on gimbal) doesn't put the camera into LV mode and the gimbal can't figure out when I have the camera in video mode - hence the video trigger simply doesn't function. Another annoying thing is, I simply can't set the ISO (even when I should be able to).
I have upgraded to the latest firmware - so what am I doing wrong?
Mine just says axis lock any help pls
When I press record on the crane with my sony A1, it records for a few seconds than stops. any advice?
I bought one but my camera stay facing up and I can’t turn it down it says axis locked
How to reset gimbal ziyun crane2s
Hey Marcel. Thank you for everything that you do. There's a problem I am facing. When i press the auto calibrate feature, the gimbal does a few things and vibrates and then never stops vibrating. I changed the motor to high because I am using a heavy camera, the gimbal is just vibrating now each time i put it on. What should I do? Thank you so much
I am facing the same issue with my Crane 2s. Please do help if you get a solution for it.
just sell the gimbal bro. i used this gimbal for 3 years it is very strong but the quality and support is very bad, I had to change my USB board because it fried for no reason, then last month my tilt motor board got damaged again all of a sudden. and now when I finally got it back after repair its vibrating like carzy all because I accidently hit the auto calibrate.
Very useful!
hey , how do i set up record button on the gimbal to work with sony a7 ii
Please Answer me, Can i Active Crane2s Withoud Camera ?
My crane 2s is not connecting to Mobile & connecting once and just disconnects in seconds & last not upgrading while connected any suggestion please
Any chance for the Crane 2 menu? 😕
Wait, does this gimbal calibrates automatically..?
Hello marcel.. can you help me with my crane 2s problem?
Is there a "start recording" button in crane 2s?
Is this compatible with the a7iii?
It doesn't connect to my WiFi? Can still use it ?
Great video!!
I get this gimbal but when i film for a long period of time the gimbal is never perfectly stable, footages seems to be a little shaky. (is perfeclty balance)
Any settings to make it smoother on the movements and more stable?
Thanks!
hi, depends sometimes also on the type of shot, different modes work for different scenarios better or worse. For that I soon will upload a tutorial on it. But generally speaking, you could increase the smoothness a bit and also check one more time your cam package if it has lens support on.
Is it possible to control bmpcc 6k direct from the gimbal? To start filming and focusing like you do with the Canon?
hi for that you can go to their website and check their compatibility list. There you can find an exact list which shows which features are available. I personally haven't used the bmpcc with the controls on this gimbal. So can't say for sure
Why crane 2 goes to sleep mode while working plzz reply
Hi! Can I use the servo follow focus from crane 2 on the crane 2s? Thank u!
I like also to know
What is the best motor settings from low , high , medium to canon 70d + 18-55 ?
i'd go for low
@@marcelbrandel9078 okay thank you bro💘
My Crane 2s screen is not working
Does this gimbal support Sony a7r3?
yes, you can def balance it on there, and access start/stop recording, but can't change aperture, iso, shutter and WB from the gimbal itself
Thank you
Man how can you speak CHINESE so accurately!
This would actually be a useful series if he slowed down and showed what he was pressing in these demos. 🤔
And it wont auto tune either
How to rectify X error
Informative video, but very annoying music
Sir I am Indian photographer please solutions axis Lock
No puedo manejar mi sony a6300 desde el zhiyun crane 2S
Very annoying music
The rest is good :)
Is there a hack for controlling Sony A7III aperture and ISO?
Hli
تورو خدا یکی اینو واسه من ترجمه کنه😫
Crane 2s no power