Cleaning intake manifold pressure sensor on Diesel Volvo
Вставка
- Опубліковано 10 вер 2024
- Maintenance: When cleaning EGR valve on 2.4L Diesel Volvo, dont forget to clean the intake manifold pressure sensor.
d5t5.com/wiki/...
Volvo 31216308, Bosch 0 261 230 219
Photo from D5T5.COM
My car began to run bad today. I own a V60 D3 2.0
The check engine light went on. Used my OBDreader and it showed the code P3410 and P0396.
Searched on the internet for explainations. One of them was intake manifold sensor. Found this video and followed it.
My Sensor was very dirty.
After the cleaning, the engine run just fine.
Thank you for that, just saved a lot of money!
I just done mine took 15 mins very easy job well worth doing it was nearly clogged up 100,000 miles on the clock, Thanks again for a very useful video, keep them coming, Peter.
Did mine today on D3 5cyl. After 235.000km sensor was 50% clogged. 10min and jobb done . Cleaned with brake cleaner and in the end with electronic cleaner to make sure its cleaner . 👌🏼
Tack för att du visar oss hur man kan göra såna enkla saker som är bra flr bilen 😍
As usual a very clear, informative and interesting video.
Many thanks.
Keep up the excellent work.
Люблю русский английский. У меня Вольво S80 2003, владею 14 лет. Встал вопрос о замене авто, почитал, пообщался и понял, что у меня лучшая машина столетия. Кстати, она меня ни разу не подвела.Оставляю!
Just checked mine, xc60 2,4 d4 awd with 130.000 kms. The sensor was very dirty, almost clogged up! I have to drive 400 kilometres today, i will see if there is any noticeable difference while driving!
Thank you for the videos, there are all useful and interesting!
Cheers from France!
Any difference after cleaning?
@@jk9910
Honestly, no, but I was not excepting any big difference.
I will see if the consumption decrease in the coming days/weeks.
I did this today on my Volvo V60 after owning it for a year. The sensor did look clean but no idea if the previous owner did this cleanup. Im happy anyways!
The best car maintenance youtuber....i miss yours Suzuki SX4 videos...but....excellent..best regards
Thanks for your excellent work and instruction videos for your Volvo XC70s (gasoline & diesel). Helps me a lot! Greetings from Germany! Please keep up the good work!
Learning something new from you and Yuri, as always. Big thank you to both!
Thank you for this video, I will do this on my D5 on Friday when I change the oil and filter. 👍🏻👍🏻👍🏻
Thanks for all your uploads; I'll check mine tomorrow.....95k miles and has never been cleaned from new. It will be interesting to see.
Please let us know here on the condition.
Will also check tomorow, mine v60 D5 is on 330 000 km and has probably never been cleaned
@@volvosweden Removed my sensor earlier today and it was about 80% blocked with sooty deposits. Cleaned up with brake cleaner, reinstalled and test driven. Car feels very smooth and I think the engine also started quicker than usual. 👍
@@volvosweden Hello from Czech Republic - near Prague City. I checked this sensor on my XC70 D5 2012 and was dirty, but not wet, like some carbon or hard dust. I clean it with B Cleaner + toothbrush and some small hard carbon parts with screwdriver (just outside) and put it back. I'm 2nd owner of XC70 and on the car is now 391000km. Thanks for your Volvo channel !!! good luck
👍🏼 15min job done. Now what should i notice next drive?
Thank very much for the video. I will clean up tomorrow on my D5244T4
Thanks. Mine was blocked completely. Now clean.
I just cleaned mine with 250000km and it was very gunky not quite as bad as the one in thumbnail but now its clean :)
Same procedure on the D5204T3. Took a few minutes, it was nasty as hell. My intake must be plastered with soot I guess... I wish I did not see this ! Thanks for this valuable information ;)
Is your engine the D5 Euro 3 ? my V70 is a 2005, thanks.
@@gigabyte2573 My engine is a D5204T3 and not a D5244T3, I made a mistake on the first post. It is a 2012 Euro 5 !
Thanks for great video. I'll be doing mine tomorrow. Hello from Ireland.
Report on the condition and milage of your Volvo.
@@volvosweden Will do. Its a xc60 2.4 diesel awd with 255000km and drives like new.
Is it only for Diesel engine or petrol as well. Thanks
I just did this cleanup on my V70 D4 AWD 2013 at 186000 km. It was moderately dirty. I guess we have good fuel where I live.
If you have the D5244T4 engine the manifold pressure sensor (boost pressure sensor) is located on the outlet side of the charge air cooler.
Réf : 31355463
Of the intercooler? Or are you talking about something else? Im not too savy
@@LucasW.B Yeah it's the intercooler
Video Video Video pleaseee 👍👍👍
Did we ever get the Diesel V70's here in Canada? I just bought a BMW wagon just for the diesel...
Hello sir!
What are the symptoms of a clogged sensor? can you answer me please?
My Volvo XC60 has a problem, there are whole days when it runs fine, but let's say I'm driving on the highway at 130-140 km/h and at a certain moment the traffic is choked and I'm driving at 80-90 km/h, well if I go like this for 1 or 2 km, then it doesn't want to accelerate, but the engine doesn't rev either, I stop in the parking lot, I stay for 2 or 3 minutes, then I leave and everything is ok. can you tell me where to look please? I went to the representative office and I was just clumsy.
Thank you !
I have a 2014 D4. Having intermittent REDUCED ENGINE PERFORMANCE message with engine check light. Autel scanner display 4 messages.
P11182A manifold air temp circuit low
P047100 exhaust pressure sensor
P012700 intake air temp too high
P010100 Mass airflow sensor
The mass airflow sensor was replaced and now the other messages appear.
Any ideas?
hello, do you know where this sensor is located on the same vehicle year 2009? Thanks a lot
Great as always! I will check mine too👍
I have a Xc60 2013 d4 163hp have a problem with the car the error code p00bd Do you know what could be wrong then?
very good -thanks for this
Hi, I've receided P0096(00) error, it means the Intake Air Tempetarure sensor i faulty. Is it this one sensor or the other one on the bottom, next to the intercooler?
This was great advice thank you, mine was caked in crap...
Is there any other little jobs like this that are well worth doing?
Where is it located on a 2007 volvo s80 D5?
Do you have any ideas for cleaning the turbo pressure sensor for the same engine?
I have error p0096... D5 engine 151kw...intake air temperature sensor 2...is that the sensor???
Hej Martin, har just letat efter MAP, jag kan inte finna någon ting som liknar den som syns på bilden, det finns ju en hel del olika prylar som är anslutna med el ledning och insugningskanalen.
Great stuff....
In my d5, aircon does not work. Mechanic said it is gauge pressure failure. Where it is located and can I change it myself? Is it difficult job to do? Cheer
This apply for a v50 diesel?
I'm going to do this, thank you
Is map sensor located on the same place in volvo xc60 t6, 2010?
Where is the barometric pressure sensor/map on. 2008 S80 Volvo?
Hey! i have a s80 2008 2.4d 163hp 5 cyl. The sensor is not located the same on mine and i cant find it. If anybody knows i would appreciate it.
Здравствуйте, подскажите что за ошибка B102E09 , кондиционер холодным дует только при движении/на ходу. Ищу в чем проблема, авто Вольво хс70 2009 года
2003 volvo xc70 2.5L
Whit smoke exiting tail pipe...
after warned up drive RPM goes up but speed is not moving as it should slow... when cat first started up under hood behind engine exhaust comes out right away...
275,000 miles.
Coolant not really leaking added BarsLeak.... still white smoke. White smoke gets real bad if moving slowly...
PCV?
MANIFOLD?
HEAD GASKET?
SELL CAR??
Thank You for any advice.
You didn't say which engine, diesel or petrol. Sounds to me like you have oil leaking somewhere. Clean your engine, drive it for 40-50 km, then when you park, place a piece of cardboard underneath the engine bay. Try to see where it leaks.
Your sensor was wet in oil. Maybe need check crankcase breather diaphragm in oil separator. I'm wondering, how is yours.
Anyone where this sensor is on the D544T4 engine? I guess moved it when going from the D5 to the D4 configuration...
Where is the location on a euro 3 2002 v70 d5?
Is ok to clean with AB 80 similar to wd 40
Is it ok to use WD40 for cleaning?
Anybody know where this sensor is on a 2008 V50 D5 ?
Good stuff.
My is clean like new :)
Do you have video for removing a headlight from a 1999 Volvo S80 t6? Thanks in advance.
I believe it's a remove plastic wheel lining plastic rivets, security torque screw,
drop the bumper slightly and remove both the side light and headlight replacement is the reverse, if it's only a bulb change prepare to get double jointed and bleed a little.
T6 are excellent, I had sub 7 seconds at 0 degrees, very consistent grip and traction.
And don't believe the hype, the small Vauxhall gearbox does not self destruct if you press the go> pedal.
Just don't try continuously lapping at a track day. It needs to cool every so often.
Buy a newer and it takes pulling two tent pegs to get the headlamp out!
I do have a Volvo V70 Diesel in extremely good condition no rust what so ever. In this video You describe how to clean a part mounted on the top of the manifold. I do not find this part on my Volvo, I can not find out from what year this part was introduced. Is here somebody who can explain ??
My D5244T5 (2005 V70) had the MAP sensor on the intake tube down by the intercooler. Follow the intake tube from the engine block and you might find it at the end. Mine was pretty clean.
For D4204t5 is it same?
Xc 60 D5 have the same type ,i clean it with a spray similar wd 40 disolve the gung carbon very well , but does have any good impact on the gas mileage ?
P2262 fault code?
Can't seem to find my sensor can you help ..I have v70 d5 awd 09
Under right headlight on intercooler. It's probably orange
If this is the intake how is it so filthy?
Hi there do you no where it is located on the euro 4 d5
Same sensor, in much the same place, well worth doing, my MPG INCREASED 10%.
Thanks to your explanation in English. Is this the same with the small 5-cylinder-diesel - D3, 2.0l?
Yes, I own a 5 cyl. D3 2.0l MY 12 and can confirm that the procedure is identical, even the Torx 30 screw is!
@@Tobias_Haupt Thank you, may be I should check this... after 275.000km... ;-)
I didn't know your Swedish Moose 🇸🇪 was a diesel until today..
I have done a lot of work to my 2010 XC90 3.2. Nearly a NEW Volvo at this point..
Is there an aftermarket head unit you recommend.. I am researching 2 DIN touchscreens with Android Auto, Navigation and Bluetooth. I like my factory stereo, however as much as I drive I would like some of the newer technology BUT I want it to look clean and good and this is difficult since XC90 OEM head unit takes up SOOOO much of the dash and is definitely a large part of the XC90s dash and interior personality... Very split on this..
I own the 3.0 XC70 T6 petrol. My friend has 2015 XC70 D4 diesel. It's his video.
Look on Facebook at the legends audio page!
Is this the same for p2 d5? Thanks!
Not sure
When brake cleaner drives it can leave thin coating layer on the sensor, which in turn can make fault on sensor.
Is this sensor on a T6 engine as well?
No, T6 is a petrol engine. I think this is only for diesel engines.
I notice he has had the cam belt replaced (sticker on air box), has the car many km on it? :)
100’000 km, 5 years
@@evgenykosourov5958 Ah I see, here in Sweden the interval is 180 000km hopefully it will hold till then. I have a 2015 D4 AWD and I have appriciated and used your service videos, thanks!
I did this today. Sensor was full of slummy black shit. Now is super clean.
Q1: What should happend now? What should change?
Q2: what about inside of the engine block? (Place where put the sensor). I saw lot of shit there. Should I clean it to?
Hi. Last week I cleaned mine. It was exactly like yours. I felt like has better consumption now. Also I have the same question about the engine block. 🤔. I feel there is a lot of dirt inside.
Has anyone experienced a difference after cleaning?
Yes. Before cleaning when I start engine the revs are variable, something like one of the injectors didn't work properly. After cleaning the revs, when start cold engine, are like engine is new.
Waiting for DIY of v50.
Lots coming!
Гоняешь по америке на пензенских номерах?)))))
Русский штоле
Ага