The original bolt is M10x1,5 , length is 25 mm, head is hex 13 mm, quality 8,8. There is a room for longer bolt, max. 55-60 mm. If you don't have bolt, you can buy two according these parameters, but the head size will be 15 (if hex flange bolt) and 17 mm if normal hex head. This is not problem. And you also need two wood construction washer.
Thank you, it helped a lot. I have a volvo V50 2010 and I am about to install the second isofix and I was wondering what is the process for that? Same as this one where I proceed with unscrewing the 2seated part? Also is there a slot for the second isofix to be begin there? Thank you again!
Witam. Czy można wiedzie jaki fotelik zamontowałeś w swoim samochodzie? Ja także zamontowałem isofixa do swojego S40 2004r. Nosidełko spasowało prawie idealnie, natomiast fotelik już żaden... Dzisiaj byłem na doborze fotelika i maksymalnie co uzyskaliśmy to kąt 30 stopni, czyli o wiele za mało. Wszystkie foteliki stały wręcz pionowo. Pozdrawiam.
Witaj, Na razie jesteśmy na etapie Cybex Gold ATON M z bazą M I-SIZE, tutaj kąty są odpowiednie. W przyszłości do tej bazy będzie pasował fotelik SIRONA M2 I-SIZE ale nie przymierzaliśmy go jeszcze do auta. Pozdrawiam
Hi, ebay or something like that, depending on country where you live. For example: www.ebay.co.uk/itm/GENUINE-VOLVO-ISOFIX-BRACKET-FOR-CHILD-SEAT-V50-C30-S40-C70-8639658-31439072-/223730790151
Cześć, akurat interesuję się tematem i top tether to jest jeszcze jakieś inne mocowanie fotelika poza pasami i isofixem. Albo po prostu jakiś dodatkowy pas, nie wiem.
Hi how did You get the measurements? And can you be specific please. I have a Volvo v50 2004 and have both the isofix part but I’m wondering how I’m going to place it I would be very thankful...
Hi, all you need is the isofix part with screws, V50 mount is the same like S40 II (my is 2005). Check out this manual: www.volvopartshop.com/ekmps/shops/tmsvolvo/resources/Other/fitting-instructions-31439072.pdf
Thank You All for all those likes 👍🏻and subscriptions. I am glad to see that this video helped so many people. 🤝👏🏻
Thanks for this, would'nt have made it without you.
Nice job. Thanks for sharing. I need to do the same to my Volvo V50.
Much appreciated, exactly what I needed to see! 🙏
Thank you! I proved to my wife that we don't need to change car 😂 i love my Volvo so much and i don't want to change it to the new plastic one.
Yeah ! I still drive the same car - now almost 20 years old volvo s40 - now with two isofix 👨👩👦👦 😂 regards
Thank you very much for this video
The original bolt is M10x1,5 , length is 25 mm, head is hex 13 mm, quality 8,8. There is a room for longer bolt, max. 55-60 mm. If you don't have bolt, you can buy two according these parameters, but the head size will be 15 (if hex flange bolt) and 17 mm if normal hex head. This is not problem. And you also need two wood construction washer.
@@somasamtab8560 thank you for your advice ! Have a great day ! 🙂
Thanks for the video, helped a lot!
Legend, thanks!
Thank you, it helped a lot. I have a volvo V50 2010 and I am about to install the second isofix and I was wondering what is the process for that? Same as this one where I proceed with unscrewing the 2seated part? Also is there a slot for the second isofix to be begin there? Thank you again!
Nice to hear that. Yeah it is similar procedure and it should be slot for second isofix also. Regards
Super, dzięki
Thanks just what I need.
Thank you very much, helped me out alot!
No problem !
Thanks man - that helps a lot!
Rene Messner No problem. Volvo manual is unclear in this particular case.
Thanks for this!
Thank you very much, you helped me a lot 💪
Very useful video... Thanks a lot👍
Great 👍
Thanx great help
Thanks!What about other side?Same procedure?
Nemo Cap Yes
thank you! very helpfull
Thanks!
Witam.
Czy można wiedzie jaki fotelik zamontowałeś w swoim samochodzie? Ja także zamontowałem isofixa do swojego S40 2004r. Nosidełko spasowało prawie idealnie, natomiast fotelik już żaden...
Dzisiaj byłem na doborze fotelika i maksymalnie co uzyskaliśmy to kąt 30 stopni, czyli o wiele za mało. Wszystkie foteliki stały wręcz pionowo.
Pozdrawiam.
Witaj,
Na razie jesteśmy na etapie Cybex Gold ATON M z bazą M I-SIZE, tutaj kąty są odpowiednie. W przyszłości do tej bazy będzie pasował fotelik SIRONA M2 I-SIZE ale nie przymierzaliśmy go jeszcze do auta.
Pozdrawiam
Where to buy this isofix? Thanks
Hi, ebay or something like that, depending on country where you live.
For example:
www.ebay.co.uk/itm/GENUINE-VOLVO-ISOFIX-BRACKET-FOR-CHILD-SEAT-V50-C30-S40-C70-8639658-31439072-/223730790151
and where is the top tether??? thanks!
What do you mean by tether, could you please describe it in other way ?
Cześć, akurat interesuję się tematem i top tether to jest jeszcze jakieś inne mocowanie fotelika poza pasami i isofixem. Albo po prostu jakiś dodatkowy pas, nie wiem.
Hi how did You get the measurements? And can you be specific please. I have a Volvo v50 2004 and have both the isofix part but I’m wondering how I’m going to place it I would be very thankful...
Hi, all you need is the isofix part with screws, V50 mount is the same like S40 II (my is 2005). Check out this manual: www.volvopartshop.com/ekmps/shops/tmsvolvo/resources/Other/fitting-instructions-31439072.pdf
Thanks ❤