Learn CAD in 10 Min : Turn Your Ideas into Reality
Вставка
- Опубліковано 21 бер 2019
- Learn CAD in 13 minutes!
3D printing is the future and the future is now! CAD and 3D printing can turn ideas inside your head into physical items you can use in real life.
In this video I'll show you the basics of CAD. There's no way all of CAD can be covered in a 13 minute video but hopefully it will demystify it enough for you to get in and start designing basic items.
Want to learn how to repair electronics like a pro? Forget wasting years going to school to get an electronics degree like I did. Don't waste time with history and economics, just go straight to learning how electronics work and how to repair them. Check this out - bit.ly/2Loej31
Tools used in this Video
- Digital Calipers : amzn.to/2JzZnNC
- Sketchup - www.sketchup.com/
- Fusion 360 - tinyurl.com/ybpfj8ju
3D Printers
FlashForge Creator Pro, this printer is a workhorse. We have two of these that have been running non-stop 24/7 for the past 2 years without a single issue - amzn.to/2Tpv3Vx
Comgrow Creality Ender - a simple aluminum printer that won't break the bank - amzn.to/2UXHmKg
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
-------------------
Current Quad Setup
FlightClub Neutron - tinyurl.com/y9ahxgmy
Aikon AK32 20X20 ESC - tinyurl.com/y77ch6jt
Talon F7 Flight controller - tinyurl.com/y7dg3r5q
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
Tmotor F40II 1750KV - tinyurl.com/y8bh9p9
TBS Unify V3 - tinyurl.com/ycdtmfbt
Lumenier AXii Stubby - tinyurl.com/y7l79ym4
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
My Video Equipment:
Main Camera - amzn.to/2SsBabY
B Camera - amzn.to/2SbvZNT
Favorite Tools
Weller Digital Soldering Station - amzn.to/2JngsXg
Dewalt Gyroscopic Screwdriver - amzn.to/2EOwLOq
Anker Powerhouse - amzn.to/2JGbOUz
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - / fpvflightclub
Follow us on Instagram - / fpvflightclub - Навчання та стиль
I really am starting to regret BSing my way though the cad class I took in high school
Fuck I have a design and engineering class tomorrow it’s gt and I’m shite at math
@@danndidntask4057 focus now profit later
Me too. My freshman year I took intro to engineering, and it was basically a CAD class. I sucked at it, and I never really tried. I wish I stayed in the engineering course for my high school.
Bro SAME.
Yup me tooth
I know there's WAY more to it, but you showed me that I could start doing this! Thanks a lot!!!!! You took all my fears of learning 3d printing and threw it out the window.
Tinkered is a lot easier
Bravo. You are a natural teacher. The ability to explain a complex task into a short easy tutorial, is rare. Some of the most talented, experts in their field, are horrible teachers because they lack this ability .Once again. Bravo. I am really impressed.
Wow! Thank you so much. I’ve had a 3D printer for years and never made anything of my own. That has given me the confidence to go and try.
Exactly what I needed. Just a quick tutorial to share some basics to get started. It's pretty overwhelming at first glance.
Great video! It was perfect for seeing it for the first time, and giving me the confidence to know that I can try it.
I'm preparing for a interview and one of the key words was CADD which I had no clue to what it was. I've watched a few different video's which gave good breakdowns but your process of going through step by step on how to make something as simple as this device gives me more than enough knowledge to be able to at least talk about the tool through the interview. Thank You for this video and the new found interest.
I’m already capable enough at CAD to accomplish what was shown here but, I still enjoyed this video. Great way to get people to wrap their head around CAD and grow from there. Thank you.
Finally a simple video to grasp a basic understanding.
Already understand 100% than i did before.
Thank you so much. I learned a lot in this little tutorial. Very similar to making signs with a vinyl plotter that I'm familiar with. I thought 3d printing would take a long time to learn, but this crash course opened my eyes.
Wow! Thank you! I searched Cad for beginners and this vid came up. Definitely takes some of the height off the mountain.
this is the best tutorial ive seen for the basics and getting started.thank you so much.
Thanks for the easy straight forward approach to Cad.. I've learned a lot.
Keep up the tutorials 👍👏
The only and best teach of 3D print I’ve ever seen very detailed like it should b for someone not no how to use it cuz it can b intermediating, all others just do it but don’t explain into details how they got there
Awesome dude. I was here thinking it was going to be a whole lot more complex. Thanks 🙏🏾
Thank you! You're right, it's just a very short tutorial, but I am a lot less intimidated now!
Getting started seems a lot less overwhelming than I expected.
I think this video is a great starting point for people who are interested in cad!
Did you end up getting started
Thank you so much for this video, so clear and simple instructions!
Bro actually memorised what 10mm is in inches...
Awesome! Starting CAD classes this semester.
You really are a great instructor. I been trying for years to understand 3 D. Thanks
Great video man. I just got into CAD today!
Thanks for demystifying CAD for me. Great video!
I can't thank you enough for this video I will watch this a hundred times over before I get it but very great explanation
Thx for keeping it simple!
ITS WORKING! nice job dude
dude...thank you!! my first cad tutorial ...lets see where this goes!!
Thank you!! This really demystified the topic for me.
Finally a tutorial that actually is short enough to inspire the masses
This was so educational. Thanks!
Great video, dude! Thanks a lot! 😃
Thank you, that makes a really good introduction.
Nice! Im starting to play around in tinkercad but want to learn SketchUp. I'd love to see more of these types of videos as well as the fpv stuff. 😉 Thanks.
Just putting it out there for the people reading this:
SketchUp is Not suitable for product design. You need a Parametric CAD program to accurately make and size your designs.
This was really helpful. Thank you.
IT'S ALWAYS THE UNDERRATED VID THAT'S LEGIT! THANK YOU!
Well done man! Thanks!
That was very informative! Thank you!
excellent video! you achieved exactly what you set out to do...bust the myth that it is rocket science to design.
I was 2D designer doing business signage and I taught myself so it can't be that hard and after watching this I have realised 3D design might have more dimensions but it also has even better software available and some of them are free too...unheard of in the 2D print world!
Thanks for the Video you earnt a like and a Sub ;)
This was awesome thank you!
This was great! Thank you!
The energy is so good.
Awesome tutorial, thank you!
Just what I needed to learn. You earned a like and subscribe. Great job and thank you.
Awesome video!!
Thanks man
I am getting ready for some prototype action!
That was fantastic Mike! I've been putting this off for way too long.
CAD for fpv is so helpful. solve any problems you have
A very good video and well explained.👍🏻
I couldn’t catch on to this teaching style but thanks for the effort. I guess I need cad for dummies . A slower and simplified approach but I’m 52 years old and have a harder time catching on than a lot of people would.
Really well explained video that covers most basic features in solid works. Thank you so much. Also would like to know if you have online tutorials.
Awesome... thank you so much for sharing!
It works! Thanks a lot.
Thank you Mike. You rock. I needed that kick in the butt!
thanks!
Amazing tutorial!
what a good tutorial. thanks
Great video, thank you for the time and effort!
This helps so much, thanks dude
Awesome dude, Thanks
This actually was pretty helpful!
Well Done and thank-you so much!
great video really this video explains cad better than a 1 hour video would
Oh yes please make another video! I want to learn Mike.
Nice tutorial! Thank you! 👍👍😄
Cool video. Thanks
Great channel name!! Very clever!
Great tutorial mate!
Thank you! Thank you! Thank you!
Excellent video, I'm sure it will help many people get started in making things. Once I realized that a 3D printer was nothing more than a computerized glue gun it became very useful in making parts I could not buy.
Awesome vid!
Very KooL, I was able to follow you ,,,Very well and simple ,your a great Teacher 👍
Great video, thank you
Thank you so much!
Excellent video Mike, and yes we want more lol, after watching this video, I want to make so many things for my rc crawler. Thanks so much !!
Winning the fight against the toothpaste tube :)
2 years later the toothpaste tube almost came back but James held on
@@rmbgtango7563 7
Nice one man, yes please more videos
fantastic, thank you
Cheers Great Video I have two 3D Printers but using Fusion and Radan designer to do my cad
The printer is coming. I have the ideas. Will have to learn CAD but use it in Linux- probably with the open source program called SolveSpace. This video helped a lot- especially it has given me extra confidence that I can accomplish creating things that will be useful to me.
Awesome video
Would enjoy seeing you create a quad frame in a similar video!
thanks for the kick ass video dude!
Thanks for that!
I found this video very interesting. I'm looking to get a 3d printer but have no ideal how to do it. This showed the basics to get started with CAD. Now I can get a base line on what to do. Deff wanna see more vids on 3d printing. Awesome job brotha 👍
thanks man. if you're getting a printer for casual printing and nothing heavy duty, a simple printer like this will work fine. set up right it will make great prints:
amzn.to/2UXHmKg
That must be a good printer cause everyone is telling me to get the ENDER 3. There's alot of videos on UA-cam about it as well. So that's a good thing.
Awsome stuff man! I am trying to design a prototype for a product I have in mind and I have been debating whether or not to try to design it in cad software myself or resource out that part of the development process. After watching this, I think I should be able to do it myself and save money! Now I just need to buy a 3D printer haha
Awesome dude...
Loved that wink after mentioning about fusion 360's free download for students & teachers. 😎
Great vid
very help full
Thank you so much!!!!
Good video so educative please add more
Thank you, thank you, thank you. Great tutorial, especially since it keeps intimidation at bay. Just the push I was waiting for. One question though. What printer would you recommend to start with? I know there are different budgets and categories so if I'm looking at a Prusa right now what would you think about it? Again thank you, I hope I have an opportunity someday to pay it back or at least forward.
Legend. Thank you
Thank you!
Great teacher:)
You're Awesome!
Thank you!,
Excellent tutorial, I also use Solidwroks...!!!
nice little tutorial dude :)
OSM sir 🤘👏👏👏
A video on 3D printing would be awesome! From which one a beginner would get to finished product and getting files!! Thanks man!!
ok, i'll start on it!
FlightClub Thanks! I’ve been watching since. Your QAV 210 video. That was my first build and I followed along! Excited to get more into the 3D print DIY! Thanks!
Nice video! I recently got the free download of solidworks, but I didn't even open it because I don't know the first thing about cad. I am going to open it and try to design something right now!
Thank you 😊