Bose ToneMatch Mixers - Get a great vocal sound at every gig!
Вставка
- Опубліковано 7 сер 2024
- Colin runs Meg through Bose's new mixer line, Tonematch. The T8S offers studio-quality EQ, dynamics and effects. Check out the Bose T4S Tone Match - goo.gl/FwdL8y and Bose T8S ToneMatch - goo.gl/ajHb5d
Interested in other Andertons UA-cam channels? Click on one of these links to find out more…
Andertons Guitar & Bass UA-cam Channel: goo.gl/kRJCpb
Andertons Drummers UA-cam Channel: goo.gl/9yKSS9
Andertons Keyboard UA-cam Channel: goo.gl/ns172M
Andertons Music Tech UA-cam Channel: goo.gl/Pmy8Ao
Andertons Shopping Web Site: goo.gl/TPsG2Q
Buy a T Shirt: goo.gl/TrTe78
Make sure to subscribe to Andertons TV for more great videos like this: goo.gl/Pmy8Ao
#Andertons #Bose #Tonematch
I use T4 and had issue with sound in room, your video was great help to get my sound adjusted to a very loud venue I just played. Still learning the in's and out's of the ToneMatch. Thank you
Great video guys. Thanks! I have the T1 four input and am looking to get the 8.
Incredibly helpful!
Best review. Thanks for that
Thanks! Great video guys....
Excellent products. The guy was good. Interested to hear comment that a warm room will give more feedback though. I've always thought that a fuller room i.e. more people will assist in killing feedback but the temperature wasn't something I'd considered. Any more info on this?
Thank you
Can you help me understand how reverb and delay work. I get the strangest repeats on my input...
Would like to know what settings exactly were used. What reverb type etc
How do you reset the mixer so you have default settings across all channels?
Thanks. Great video but a shame that we can't see the screen to show what you're doing
I need it
Is it true these have an over heating issue?
I knew that I saw her somewhere. She auditioned on The Voice recently and what a performance! The confidence, aura, stage presence and her voice was just sick!
A bit confused on aux sends as to how. Thanks however this is a refresher course after a poor sound using this unit in a tight loud room
is there EQ preset of earthworks sr314 microphone ? I need it for my T1.
How should I use a compressor or perhaps this is generally know and another topic
can this Bose T8S use for traveling Band, and what is the down fall to look for will this Mixer give me a problem in the future. Thank You, i'm interested in this mixer but very leery
Can someone tell me what reverb settings to use for vocals (type, mix, balance)
How do u hook up PMS 300 to T4S ... not getting sound
I have quite a few Bose F1 systems so need some clarity on this mixer. Does the T8S provide a better platform for the use with Bose. I am also looking at the QSC Touch Mix.
I use a touchmix 16 on my F1's and it gives a stunning sound.
Our band has a T8S. I'm unclear as to your description in 'Reverb' at time counter 8:25. Are you saying that if I use a 'Global Setting', I should not use any individual reverb settings? Thanks.
The reverb type is global. Then for each channel you can say how much reverb (mix) and how bright it appears, but not the type or decay which is global.
They didn't even show the mixer when they discussed setting EQ, only some presets. How do you actually adjust EQ?
I always struggle with reverb and delay settings on my T4S. Can you explain in detail what does the feedback, time and balance mean?
Me too! I ended up buying a mic mechanic and using that for effects
Can you use this as a mixer for any PA System? Or does it have to be connected to one foe the Bose L tower systems?
Any. They have standard XLR outputs.
This young lady can sing. I can tell just from her sound check. Would love to actually hear her sing a full song. There is some definitely soul there
How do you "Save" your tweaking.. When I fire it up ..the settings are not saved have to "tweak n the fly" is my unit defective?
Save (and load) on Scenes
Can anyone help. I have an L1 PRO 8. When I do loud vocals it peaks the system into red even when the speaker itself is on 10 o'clock. I have tired direct in using a wireless Shure Beta 58a (I think is the mic I have) and I have put it through an analogue music desk. Either way the system can't really handle my vocal even under 50% volume. Is there a way to change this with my chain, can a tone match help this in anyway? I have been thinking my issue might be because I am using a non-bose mixer. As my last resort I am looking at a tone match or any other suggestions. Otherwise I think I need to 16 (but it's too heavy for me). Advice welcomed.
This is more likely to be that you are using the wrong input or wrong type of lead. I had this issue which caused 'ducking' in the sound. You must use input 3 with a TRS lead.
You may have worked this out already, if not I hope this helps.
I play the saxophone. I have a wireless mic with a receiver that already has reverb etc built in. Could I still use this as my main mixer and tweak even more.
What are best presets for vocals . I have that Bose tone match
would be nice to see someones settings
@@jevescio depends on the microphone used and the singer. Start with no effects and select the correct mic and work from that. Often need to roll off a little low on zEQ (unless it's desired), then a noise gate (I set about -40dB) so you don't get rubbish when not singing, a little reverb start around 35% bit more for backing singers (which puts it further back in the mix) and then if odd feedback use the Para Eq to notch it out.
Can I use the T1 tonematch with the Bose S1 ? as we have both the L1 and the S1.
You can! You could connect the S1 via the T1 master output and use it as another speaker for whatever is playing through the T1. You can also use the S1's line out and go into the L1 power stands analog input. This gets you two "extra" channels into the L1 although you are limited to the settings on the S1 itself for those channels. Or If you have an external T1 power supply you could use the master line out into a flat channel on the S1 and treat it like any other speaker, daisy chain two of them together if it pleased you.
@@ericstalker2630 Thanks for your help, I may try what you suggest.
Are these mixers only intended for use with Bose speakers? It’s unclear from this video whether they can be used with non-Bose set ups. Although the brief demo of the SM58 was useful it would have been helpful to hear how the mixer handles guitars as other instruments.
No these are for any speakers or PA set ups not just Bose systems :)
You can use the mixer with any power amp. You will need a power supply to power up the unit. It works great with guitars ,keys, bass.... I use them and I love them .. Good luck..
I contacted Bose, they need need to add eq adjustments to the USB player. Even a High & Low adjustment would be great. I don’t know if this will be addressed with a firmware update. That may not be possible. Channels 5 & 6 should also have that ability. I purchased this specifically for the compact high quality mixer with the USB player for wav files. This saves a lot of room. My Bose 80-III’s are enough to hall around.
@@maxxleonard9399 dude because of the original question “is this intended for the Bose”
how to connect the headphone in tonematch?
Plug it into the headphone jack on the mixer.......
Colin, quit touching your nose! lol
Dont u think to help sell the unit.u should of did a sing threw the reverb to show people how it sounds.
Comprehensive demo, but as per usual, just too much. I'm a solo lead singer. Multi strumentalist violin, saxophones flute keyboard using backing tracks recently got Bose L1 pro8. Knowledge of PA ok as an experiences performer only. How do I connect this mixer? For example, how do I mute the L1 's reverb as its not good, and use the mixers? These are the things I need. OK SM58 tweaking seems effective etc. Is there a specific stand or basic mic stand fitting available?
So this demo should be focus to people like me...cut down on the gizmos
Bose is amazing but I'd go blind looking at that tiny screen.
I think the reverb effect with this unit is no good cos there not one person demonstrating the reverb effect
Why wouldn't u show the reverb effect sounds. I mean who teaches these people
If he stops picking his nose & she stops saying cool - great vid
"Just buy one"?? yeaaaa..sure...4 channel-$700 dollars. 8 channel-$1000 dollars. I search thru You Tube videos hoping to gain insight into a product-not watch a video and try and wait for the correct information I need to know before I make a purchase. I could just leave a question/comment in the hopes that the channel creator actually answers questions, but that is just as risky as purchasing the unit. Never understood why people create a channel, create a video, post the video and then never answer any questions about the video.
I hope that mic is her mic because he was kissing it with her lips.
An SM58 is better used as a hammer than a microphone
More showing, less talking please? Need a tutorial more
absolutely bad soud,,
Probably your speakers!
Its your ear..needs cleaning
Or the input!! :)
Try singing singing singing
Sexist pronouns are tedious AF.
Does this guy work for Bose? I’d fire his ass. Or ‘arse’ in his case.
What pronouns are you talking about?
Bose tone match mixer’s reverd effects SUCKS..!
her face and voice made this unwatchable