I have Psoratic arthritis and can’t lift my mattress . My hands and back hurt so much . I can’t wait to try it . I hope it’s thick enough . I don’t use a top sheet it hurts my toes . Any updates on this product ?
I MIGHT LOOK THIS UP. IM SICK AND TIRED OF MY FLAT TUCKED IN SHEET UNTUCKING EVERY NIGHT. I HAVE A VERY HEAVY QUEEN MATTRESS WHICH IS COMFY BY THE WAY AND I USE PLASTIC OVER MY MATTRESS AS I HAVE A BLADDER PROBLEM SO MY SHEET HAS TO GO OVER THE TOP OF MY PLASTIC COVER BAG. THAT WOULD MAKE IT EVEN EASIER FOR MY SHEET TO MOVE AND COME OFF. I HAVE A VARIETY OF TUCK IN SHEETS AND FITTED SHEETS SO I MIGHT TRY YOUR METHOD AND SEE IF THIS PRODUCT IS SOLD IN MY COUNTRY THANK YOU.
This certainly looks easier than the Better Bedder. Their website states that the mattress have to be the exact dimensions state and my Twin XL Saatva is not that dimension. So, it will fit a Twin XL with dimensions of 11.5 deep plus an inch for my pillow top.38 x 80? AND it will work with the mechanical bed. I just had knee replacement surgery and cannot make the bed every morning and sometimes twice a day. Should the top sheets be sized up so there is more overage?
The only dimensions that need to add up is the surround diameter of mattress. So double the length plus double the width. It's not going over or under. If that matches, you should be fine to hold the sheets that you know fit already in place. Like putting a rubber band around a container to keep saran wrap or something in place when you don't have an appropriate lid! 👍 (maths logic puzzle question, essentially...)
Sorry I've just noticed that you said your bed is mechanical so I assume the head raises to sit up? Then it wouldn't work no matter the dimensions as it would spring off like if you put a rubber band over something and fold it! Sorry! 😬😬😳😳☹️☹️😢
Who sleeps with the top sheet trapped around the bed so you can't move your feet around freely??? 😲😲😲😲🧐🧐🧐🧐😵😵😵😵 I hate it when hotels have them all tucked in and everything comes away when you pull the top sheet free. They ought to just have it laid loose over the bed and folded down at the top. Anyway, thanks for the video, this DOES look a bit more promising than clipping! 🖤👍
Hi Richard! Absolutely. For this setup, you will need our accessory add-on strap. It is located alongside our Amazon listing and works in tandem with Rubber Hugger. Be sure to purchase one strap for as many pivot points as you have on your adjustable mattress.
Hi Sherri! Absolutely! Just be sure to order the adjustable bed strap along with any purchase of a Rubber Hugger. These can be found on our Amazon page.
Hi Karl! We never take off the band when changing sheets. We simply stretch the band away from the mattress, which frees up the sheets, and then let the band return to the sides of the mattress. No hassle and no lifting required!
@@pietrogiustino4177 Not necessarily. If you have sheets that aren't deep enough to tuck fully under the corners, for example, the hugger will keep them on. You couldn't easily fully "tuck" too small sheets and then bring the band over. It's much easier to slide the sheets under the corners. Then pull the rest of the edges taught if you prefer. If you're more laid back, don't bother, your comforter will likely cover this anyway.
I just installed my Rubber Hugger last night. So far, so good. I am hopefully that the sheets will stay in place. Will order it for our other beds.
It's been 2 years since your comment, is your Rubber Hugger still working well for you? I was curious to find out it's lifespan....
I have Psoratic arthritis and can’t lift my mattress . My hands and back hurt so much . I can’t wait to try it . I hope it’s thick enough . I don’t use a top sheet it hurts my toes . Any updates on this product ?
I MIGHT LOOK THIS UP. IM SICK AND TIRED OF MY FLAT TUCKED IN SHEET UNTUCKING EVERY NIGHT. I HAVE A VERY HEAVY QUEEN MATTRESS WHICH IS COMFY BY THE WAY AND I USE PLASTIC OVER MY MATTRESS AS I HAVE A BLADDER PROBLEM SO MY SHEET HAS TO GO OVER THE TOP OF MY PLASTIC COVER BAG. THAT WOULD MAKE IT EVEN EASIER FOR MY SHEET TO MOVE AND COME OFF. I HAVE A VARIETY OF TUCK IN SHEETS AND FITTED SHEETS SO I MIGHT TRY YOUR METHOD AND SEE IF THIS PRODUCT IS SOLD IN MY COUNTRY THANK YOU.
Same I bought one
This certainly looks easier than the Better Bedder. Their website states that the mattress have to be the exact dimensions state and my Twin XL Saatva is not that dimension. So, it will fit a Twin XL with dimensions of 11.5 deep plus an inch for my pillow top.38 x 80? AND it will work with the mechanical bed. I just had knee replacement surgery and cannot make the bed every morning and sometimes twice a day. Should the top sheets be sized up so there is more overage?
The only dimensions that need to add up is the surround diameter of mattress. So double the length plus double the width. It's not going over or under. If that matches, you should be fine to hold the sheets that you know fit already in place. Like putting a rubber band around a container to keep saran wrap or something in place when you don't have an appropriate lid! 👍
(maths logic puzzle question, essentially...)
Sorry I've just noticed that you said your bed is mechanical so I assume the head raises to sit up? Then it wouldn't work no matter the dimensions as it would spring off like if you put a rubber band over something and fold it! Sorry! 😬😬😳😳☹️☹️😢
Oh in another comment asking similar they say you can get a strap to keep it down on the adjustable sections! "
Just ordered ours. Fingers crossed...
How long do you think this will last and still work ? Curious about an estimated lifespan.
I came here to find that very information.
I brought one and will see how it works. I also brought the other one didn't work, but I hope 🙏 this one will work for us, will let you know next week
Feedback?
Add some choices of colors, to blend in with the bed sheet or so call camouflage, it should sell.
best product made no sheet slippage queeen size bed
The bands need to be a bit thicker
Who sleeps with the top sheet trapped around the bed so you can't move your feet around freely???
😲😲😲😲🧐🧐🧐🧐😵😵😵😵
I hate it when hotels have them all tucked in and everything comes away when you pull the top sheet free. They ought to just have it laid loose over the bed and folded down at the top.
Anyway, thanks for the video, this DOES look a bit more promising than clipping! 🖤👍
Will this work on a large couch?
so If I buy this I will Just Put in my bedsheet in my matress that is tucked in and put the rubber hugger
Will this work on a split king (dual Twin XL) with dual motorized bases?
Hi Richard! Absolutely. For this setup, you will need our accessory add-on strap. It is located alongside our Amazon listing and works in tandem with Rubber Hugger. Be sure to purchase one strap for as many pivot points as you have on your adjustable mattress.
Does it work on adjustable beds?
Hi Sherri! Absolutely! Just be sure to order the adjustable bed strap along with any purchase of a Rubber Hugger. These can be found on our Amazon page.
NAH! IT DOESN'T LOOK GOOD FOR ME.
I DON'T MIND IF I NEED TO FLIP UP OR TURN UPSIDE DOWN MY MATTRESS. I STILL PREFERRED THE ELASTIC STRAPPERS INSTEAD.
so sad I can't get this bc I'm in the Philippines
0:34 You have to the take the rubber band off and on as well when changing sheets? So why even say that?
Hi Karl! We never take off the band when changing sheets. We simply stretch the band away from the mattress, which frees up the sheets, and then let the band return to the sides of the mattress. No hassle and no lifting required!
@@rubberhugger6148 Might as well take it off to make it easier to strap it over new sheets.
@@pietrogiustino4177 Not necessarily. If you have sheets that aren't deep enough to tuck fully under the corners, for example, the hugger will keep them on. You couldn't easily fully "tuck" too small sheets and then bring the band over. It's much easier to slide the sheets under the corners. Then pull the rest of the edges taught if you prefer. If you're more laid back, don't bother, your comforter will likely cover this anyway.
@@rubberhugger6148 .. does it work for a double bed ?
Pity it doesn't exist for single beds (90x200)
Hi Karl. Our small band should work just fine with single beds. Be sure to select size "small" before adding to cart on Amazon. Thanks!
Yes, its driving me crazy, and the sheets are annoying also.😳
YES
Not made in china. In for one, thx.
Not made in China😆
Looks ugly though, sorry sir
He said it can be covered by a blanket.