Andersen 4000 Series Storm Door - How To Replace Broken Hinges (Z-Bar
Вставка
- Опубліковано 4 жов 2024
- In this video I show how to replace broken hinges (z-bar) on an Andersen 4000 series storm door. Watch my video to see how to find which series storm door you have. Replacing the z-bar is not difficult.
Feel free to leave a comment. If this video helped you, then please click "Like" & consider "Subscribing." ...Thanks!
** New Videos every Thursday & Friday @ 12:00 PM **
DISCLAIMER :
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles and/or machinery equipment, as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury which could damage the vehicle and/or machinery equipment, compromise its safety, or cause property damage.
Although this video has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. The viewer of this video assumes full responsibility if a repair or maintenance procedure is undertaken by the viewer based on the contents of this video. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS VIDEO. In no event will beachtroll, be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this video. Beachtroll assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. - Навчання та стиль
“Anderson Window & Door” Does come with a lifetime warranty on parts, I had the same problem issue with The Hinges on My 10-year-old door, Anderson Storm Door, that’s how I found out. That info is probably too late for you, but anyone watching this now might find it helpful. After giving them the information on the sticker inside the door frame & sent a New Complete Hinge/Z-Bar Setup for my Make-Model All w/ NO CHARGE or Shipping! Thanks for the Install Help, Those instructions were Not Included, lol … Hope the warranty Information helps someone…🤷🏼♂️
Nice instruction video. Just a note for anyone doing this with an original Anderson door--I believe this part is covered in their lifetime warranty. I had the exact same failure and they sent me the part for free.
Thanks…and yes, if you provide the serial # from the tag on the door, Andersen will send a replacement.
Yes, thanks Andersen is covering my repair under warranty too.
If you call Andersen who makes door, you will likely be told door has lifetime warranty and replacement part is free. So very happy with instructions here and Andersen warranty!
Got the hinge rail for free under lifetime warranty from Andersen. One phone call, and it arrived a week later. Installing it tomorrow. Thanks for the "how to".
👍 Thanks for watching!
I just viewed your video after discovering that the hinges had failed on our 3000 series door. I had our door installed almost ten years ago, but from the door misalignment issues beginning at least a year ago. My question to Andersen is," What have they done to improve this design if it a common failure?". I will be calling them tomorrow to order the z-bar kit. There is no reason for these hinges to fail like this. Thank you for your video. well done
You’re right...Andersen hasn’t done anything to correct the recurring problem...Good luck, and thanks!
FYI - if you registered your purchase with Anderson, this hinge has a lifetime warranty, including free shipping ($75.00 part).
@@davidseiffert131 my door was not registered with them and I got the part for free. I'm going to make a video today
Great video thank you. One note to your subscribers. The Mrs. called the manufacturer regarding the Z-bar to purchase. They told her the z bar on Anderson's doors comes with a lifetime warranty. They sent us the Z-bar free of charge.
Thanks for watching!
Dude. This video saved me from having to buy a new door! Thanks so much!
Glad my video helped you!...Thanks for watching
This video was a MAJOR help. THANK YOU!
@@that5chick626 You’re welcome. Glad my video helped! Thanks for watching!
Well done sir!! Almost 2 years later and still useful.
Thanks!
You’re welcome and thanks for the nice comment....I’m glad my video helped!
@@beachtroll8344 so when I removed the existing z-bar I found that the rod holding the hinges in place had only slid down causing the upper hinge to come loose from the z-bar. I was able to repair by putting the hinge back and pushing the rod back through the hinge. Success! With new screws and a little spit and polish, the door opens and shuts easily. Thanks again!
Thank you for the tip! We’ve been talking about replacing the whole door. Even 5 years later this is helping us out!
Im glad my video helped!
I got my Z bar replaced for free under the warranty. Shipped to my house for free in two days. Thank you for the detailed video.
I’m glad they honored your warranty!...Thanks for watching!
Our house was built in 1979 and parts are different. No Z Bar but the video gave us the confidence to do each hinge separately. Quite a workout! Thanks for posting this.
You're welcome. Sometimes we all need a "blueprint" to get us over the confidence hump.... Glad you got it fixed. Thanks for watching!
You know how to fix that it saved a lot of money ❤
@@hfamepham2094
Great to hear!!
Thanks for watching!
Thank God for people like u. Thank u so much. I’m a 61 year old woman and was able to do this repair on my own, after purchasing the parts.
Good for you!! I’m glad you were able to repair it....Thanks!!
Give yourself a round of applause for Attempting and completing this task ! I’m 45 yo male and I am having a hard time doing it ! !!
You know this video is old because the new price is about 89 bucks. But it was very helpful, especially since it enabled me to find the serial number. Thanks!
Glad it helped!
Thank you for your video. I just received, the park is life time warranty.
You’re welcome, glad my video helped!
Just ordered my part your video saved me 300$ thank you! Gonna call them tomorrow and see if I can get it covered under warranty too
Awesome, thanks for watching!
DUDE!!!!! Thanks now I know to fix my storm door ....nice !!you rock 🤘🤘🤘🤘🤘🤘🤘🤘
Glad my video helped, and thanks for watching!
Thank you. Ordered the zbar and had it finished in a couple hours. Next time I’ll call for the free parts first. Have a front door that will need the same repair soon. Thx again. Quite helpful. I put the z bar on the door first, with the door closed mounted the outside screws, then the inside screws. Had to file the zbar a little to get better alignment with preexisting holes.
You’re welcome!
Exactly the same thing just happened to me. Just replaced the z bar. Thanks for the video.
You’re welcome, glad it helped!
Thank you for viewers' comments about lifetime warranty. I just called Anderson Customer Service, I was told that the part is covered under lifetime warrany, and they are shipping it for free. So happy about that! No need to replace the door. And with this video, we will be able to replace the hinges ourselves. Thank you for this video and the viewers 🤩.
Glad my video helped and thank you for commenting!
You just saved me $500. Thanks so much!
You’re welcome....Glad my video helped!
Thank you posting ! Helped me out. I Ordered the hinge today. Ty for very detailed video.
You’re welcome, and good luck!
This was exactly what I needed. Thank you for taking the time to make this video!
You’re welcome,glad it helped!
I'm getting mine free directly from Anderson. That was after getting a new door closer that did nothing to help my door close properly. They are telling me door has a 5 year warranty. Thanks for the video. I hope this will fix my door. It went from working beautifully to not closing to slamming. Now it's closing, but not all the way.
Good luck!!
Thank you, I thought I would have to replace the whole door!
You’re welcome, glad my video helped!
We have this same door, installed 2008. The latch broke last year and Andersen sent me a replacement free thanks to their warranty. Starting to have hinge problems now, so will probably be ordering that Z bar soon.
Good luck!
@@beachtroll8344 Just got off the phone with Andersen. New bar on its way, again no charge thanks to warranty. Can’t beat that.
Awesome!
Thanks so much. Although I don't have the exact model in the video, this gave me enough information to fix my door.
You’re welcome...I’m glad you were able to fix your door!!
Thanks for giving me the confidence to take the hinge panel off. My problem was that the frame has became crooked, about 1/4 in narrower at the top than the bottom, making the door stick closed at the top. I just cut and took out some of the shim board the builder put in. But I never really got that bloody trim strip back in properly.
Dave Wharwood ..... confidence comes from within. You had the confidence to do it. Sometimes we all need a "guide" or "template" to follow along. Glad my video helped, and I hope you got your door working.
THANK YOU SO MUCH for posting this video! I have this same issue and had no clue what was going on. Now, time to order this Z Bar. :-)
A B ... You're welcome A B... Kind of ridiculous we have to replace the whole Z Bar instead of just the broken hinge.... Glad my video helped & thanks for watching!
Same here thank you so much I thought I needed to buy the whole screen door was this close to buy it. Thank you sir
Thanks for the video! Gave it a whirl and was able to pound the hinge back in place. Double win. Thanks again!
slim jesus.... I'm glad you were able to fix it. Thanks for watching!
I called Anderson and they sent me a new one no charge. There is a lifetime warranty on that item. They told me the new one will probably need to be replaced sometime in the future. They know this is an issue so it's covered for life.
@@tkdbob2021 Andersen is probably the only company that stands behind their product. Every other company would charge the customer for their faulty part to replace.
Never knew they had such a long warranty! Just ordered the replacement zbar and going to install it, appreciate the video!
Glad you were able to save some $$ !
Hey did you order the zbar straight from Andersen?
How long is the warranty on the 4000 series doors?
Lifetime, just have to provide Andersen the serial # from the door.
Thank you for sharing your storm door repair of the zbar hinges. I purchased an Andersen storm door from Habitat for Humanity ReStore. Everything worked properly when I looked at it but when I got home and started getting it ready to paint it I discovered one hinge was broken. I did not want to purchase a whole other zbar and searched how to repair and replace the broken hinge. I ended up using the hinge pin from another Andersen zbar and clamping down on the old hinge zbar to close the gap. I saw one video where the bushing of the hinge pin was manipulated to get the pin out but I couldn't do that. It didn't work for me. I realized how the hinge pin was put in and figured out I could pop it out by pushing in on one end to release the spring from the pin in the zbar. (Similar to a watch wristband pin) Easier to fix than to search how to fix it on the web.
You’re welcome....Great ingenuity on fixing your hinge!!...I found out after I replaced mine, Andersen warranties the Z-bar for life...There should be a sticker on the door frame with the Serial # for the door....If you contact Andersen they will send you a new one free of charge...At least you’ll have it on hand if it fails again....Thanks for watching!
Great video, thank you for sharing. I had the exact same issue and thought I needed a new door.. I appreciate it!
You’re welcome....Glad it helped!
Saaaame. Was freaking out thinking it'd be a $400 replacement
Just what I needed to supplement the directions Andersen sent with the replacement parts. Thanks a lot!
You’re welcome, thanks for watching!
Thank you very much for the video... I think that is exactly what I need and what mine was doing... Never heard of Z Bar until now 😂... Will check it out... Screen door completely off 😭... Again, TY...
The Z-bar is covered for replacement....If you go to their website and put in the serial # of the door, they’ll ship you a new one for free..Good luck!
@@beachtroll8344Thank you very much!... I will do that... Need to find serial number first... I do appreciate your response... Yes need luck!... 😂
I bought my door in 2010. The hinges are covered under warranty for the life of the door as long as your are the original owner. My new z-bar came today free of charge!
That's excellent!
Wish I had known this!!! Next time I will make a claim, since this one lasted only 10 years.
Did they ask for any proof of being the original owner?
Just submit the information from the sticker that’s on the door and you should have no problem.
Thank you so much for video. 👍This is exactly what I need
I’m glad my video helped! Thanks for watching!
Thanks for posting. Very helpful. I tried repairing the door using a universal hinge pin kit from Amazon, but the hinge bar was too badly damaged. Had to order from Andersen.
You're welcome. ..You would think some company would make a "knock-off" Andersen hinge for less than Andersen charges.
Very, very helpful! Thanks so much!!!
I’m glad it helped!
I was able to repair mine. My screen had 3 hinges and had no manufacturing info on it that I could find.
I took 16 penny nails, cut off the heads and used the shafts as a replacement rods for the hinge. To keep the penny's shaft from falling down the tube, I put a self tapping screw about 3/4" down from each hinge to act as a bump stop. I put half of the nail shaft in the top of the hinge and super glued it in place. To insert the hinge, I slid the glued nail shaft in place while the bottom nail shaft was slid up inside the hinge. Once in place, gravity forced the bottom nail shaft to fall and stop on the artificial bump stop. Works incredibly well.
American ingenuity....Awesome!
@@volcanoscout Yes, exterior of the hinge, about 3/4" down from the hinge. I tried to place it as discreet as possible. I believe I used the self tapping screws I had on hand for metal studs used in drywall.
Great video. Thanks.
Glad it helped!
Great video thanks for sharing
You’re welcome, glad my video helped!
I had the same issue after a number of emails and phone calls they finally replaced the z rail at no cost as its covered under warranty. Not sure the aggravation was worth saving the cost of purchasing it directly but hopefully if your having the issue you can get it replaced for free. Good luck
Good tip...Thanks!
Thank you for the info this is exactly what I need it
You’re welcome and good luck!
The design weakness seems to be the plastic flange bushings that wear and crack over time. On our 20-year-old door, the bushings on the top hinge deteriorated and the misalignment caused the bottom of the door to bind. My first thought was to just replace the bushings. The size is 0.325" OD, with 3/16" a pin hole. Unfortunately, I have been unable to find a stainless part with an outside diameter that precisely matches the size of the plastic ones.
As others have mentioned, a free replacement hinge rail can be obtained by calling the customer service number (have door serial number handy). They asked me to provide photos of the door and purchase receipt. If you don't have an old receipt (who does), then a bill or document that proves residence prior to the time the door was made will suffice. Andersen could save a lot in warranty parts if they would replace those plastic bushings with stainless steel, as that is the only part that wears out.
really good job. This was a big help.
Thanks, glad it helped!
Thanks so much, this is great and very helpful!
You’re welcome...I found out after the fact, the Z-bar is free if you contact the company
Mom and I thank you. Her door will be fixed
Awesome!...Glad my video helped!
I called the manufacturer and no questions asked, took
my info and sent replacement pieces at no charge. Door has a lifetime warranty, have had it 7-8 years.
That's awesome !
I just contacted them about the part i needed had it in my shopping cart and said let me read the comments. Boy am i glad i saw this one. Called back and put a warranty claim in. Same as the original person who commented. No questions asked they are going to send a FREE replacement! These doors have a limited lifetime warranty so dont spend any money before trying to put a warranty claim in. Thanks you saved me 60+ bucks!
Amazing! Thank you so very much!
You’re welcome, glad it helped!
Wow. I have the same exact door with the same problem. Flaw? Nice video, thank you for posting.
If you contact Andersen, they’ll send you a replacement Z-Bar for free. I learned this after I replaced mine. Good luck!
U da man sir. Thank u 🙏
@@clubhelp glad my video helped, and thanks for watching !
Thank-you , you just saved me $200 -$300 . Your video is priceless!
You’re welcome, glad my video helped!!
Great video.......thank you man!
You’re welcome, glad it helped!
Just an FYI, Andersen has a lifetime warranty on the Z Bar (Hinge Rail) for the 3000 and 4000 series doors. If you are the original owner (heck, even if you aren't), you can still call them up at the number on their website and provide the serial number of your door. I just called today and they are shipping one for my 5 1/2 year-old 3000 Door. I've already replaced the closures not knowing they were covered for the first 5 years.
I found that out after I purchased a replacement Zbar online....Thanks for the info!
Thank you for info... I wonder if Larson does that... As mine came from there... Hope so!... Will check into it...
Thank you I have to do this same exact job!
You’re welcome....Good luck!!
PS called Anderson and they are sending me a new Zbar under their lifetime warrantee.
@@Luigi-pk8mk Awesome 👍
@@beachtroll8344
Got the job done thanks again for the vid. Anderson sent the new Zbar free of charge under a lifetime warrantee
Great detailed video!
Thanks!
Thank you. That helped a lot.
You’re welcome!
Thank you for detailed video. I have to replace the hinge trim for my Anderson screen door. One question did your screen door come with two tension bars? Wanted to know why two tension bars are on your screen door.
Yes, my door has 2 hinges. I believe it’s for when the glass is put in due to the weight.
I skimmed thru this video,, my hinges can be replaced separately. I used an allen wrench as a tool ,, to push the spring pin inside down, so that the hinge can pop out. Not sure if yours is made the same.. My door came with the house.
@@robertmccully2792 if the door still has the sticker with the serial #, Andersen will replace the Z-Bar for free
Just so you know, Andersen guarantees the part. You may not see the part online as the door is no longer sold. You have to call the parts center. I just received mine FOR FREE. Easy installation.
Yep, I found out after I made the video....Thanks!
nice vid but, the replacement hinge strip has the individual hinges spaced differently which make this job much more aggravating.
100% THIS. I just installed my second replacement Z-Bar (it also had different hinge spacing) and it was a MAJOR pain in the ass lining the hinges up to make sure the door closed properly / hit the striker plate. All I have left is that damn strip on the outside but that can wait until another day.
I always think of the money I saved by fixing something myself. It gets me through my aggravation lol.
I found replacement Andersen hinges. Can just 1 hinge be replaced and not the entire bar? Thanks.
The entire Z-Bar needs to be replaced. If you contact Andersen with the door’s serial # they will send a free one.
i have the same issue with my 4000 series door. I called the 800 # on my label on the door, gave them to the serial number. They said my hinge has a life time warranty. They are sending me new hinge.
Awesome!
I am having the same problem with the same storm door and just ordered from Anderson a hinge rail, is that the same thing as the z-bar? Also HD wants to charge $125 for installation so I'm extremely happy for your video because I will be doing the installation myself.
Garvin Walbrook ... hinge rail should be the same as the z-bar. Glad I saved you some money & thanks for watching. Good luck!
Vid not working
Hi, old video, but hoping someone on here can answer my question, having same issue with the broken hinge, my question is how do I know what door model I have? I do have have the sticker with serial number, will that help identify?
Hi, when you contact Andersen give them the serial # and they will ship z-bar that corresponds to your door. Good luck with your repair!
Anderson has a lifetime warranty on this part. If you call them up and give them your door serial number they will send the part to you for free. At least they did for me.
👍
Check to see if your warranty covers it. I'm on my fourth hinge and they have sent them all no charge. Covered under "lifetime warranty". Doesn't hurt to ask.....
Good tip....If it breaks again, I definitely will. ..Thanks!
The label with my serial number is completely worn and unreadable. Any tips on identifying without it?
If you go to Home Depot’s website you should be able to find the same door and order the one you need...Good luck!
Instructions that comes with the rail hinge ...says to put the hinge on the door first..... would that make it any easier...?
I didn’t attach the Z-Bar to the door. It was easier for me (less weight) attaching the
Z-Bar to the frame so I didn’t struggle with the weight of the door. Whatever is easier for you. Good luck!
Thx for the reply....🤜💯
thank you
You're welcome!
This video is helpful, but because i am the second owner of the door i had to pay for my own part. lifetime only applies to original owner.
I can't seem to get the door to close. The two strips of weather stripping on the inside of the z-bar prevent the door from closing. It is like when you get something stuck between the jamb and a door, and the door will not close. I triple checked everything. I don't think that I did anything wrong. The holes for the hinges from last time should work...
Maybe they sent the wrong z-bar?
If you call Andersen, the part is most likely covered under warranty. I bought mine then called them and they reimbursed me and I have a 3000 series since 2001 !
Just to let you know that the 4000 door is a lifetime warranty I just got my part today
Do you need to replace the zbar or can you just replace the hinges?
The Z-bar needs to be replaced…If you contact Andersen and give them the door serial # (sticker on the door has the #), they’ll send a new Z-bar free of charge.
@@beachtroll8344 thank you for the very quick response. Will call Andersen in the morning. What a great video!! Thanks again!!
You’re welcome, and good luck!
Thanks for the video. I'm in the process of replacing zbar for 3000 series. I have attached the zbar to the door frame and need to attach the door to the hinges of the zbar. Door is quite heavy. You think attaching the zbar to the door first would have been a better idea ? Please share what you think.
It would help if you had an assistant either way you decide to it....Good luck!
@@beachtroll8344 thank you. I have help.
Can the hinge pins be bought separately?
I found out after I bought my Zbar, that Andersen has a lifetime warranty on the Z-bar....Contact Andersen and they’ll send you a replacement free of cost.
tnku!
You’re welcome!
What if you do not know the brand or model? Will this Z bar still work or is it model specific?
I would find the cheapest price online and then give them a call and ask if it's a universal fit. Good luck!
So I have to buy the whole thing I can’t buy just one hinge?
The Z-Bar is guaranteed...If you contact Andersen, they’ll send a replacement free of charge.
How do you place the hinges on the zbar? How does it stay in place?
The hinges are built into the new Z-Bar...The door attaches to it with screws...Good luck!
beachtroll i saw the website and it does come installed in the zbar. The previous owner of the house I bought removed the door hinges of he zbar instead of removing from the door screws. Now the struggle is real to find those pins. I don’t want to pay 60 for a new zbar at this time. Thanks again for the response
Can you just replace the hinges and not the Z-bar? The Z-bar assembly is a whopping $70 but a whole new door is $120. i feel like they should sell just the hinges for $5 a pop
I found out after I replaced mine, that Andersen warranties the Z-Bar for life....Contact the company and they’ll send a replacement at no charge.
Like and save for next time the door breaks
Anderson will send that part for free lifetime warranty I just did it
You should not have to pay for it. Has a lifetime warranty. Just got mine delivered for free.
Take the whole door down and attach the zip bar with door off then put up the door and screw it in
You in GA?
I am not in GA.
It used to be that things were built in a way where you didn't have to screw around with fixing this crap. All I do is spend time fixing crap because everything is made out of crap these days.
I totally agree with you Tina....Everything nowadays is made to break.
I feel your pain also. Everytime I turn around and fix something there is two other things that just broke and need fixing. This year it seems to be doors. I had issues earlier this summer with my garage door sticking.
Tina, your post cracked me up. And you are so right; everything is crap and it's so bad that with some things you cannot buy a good quality part or fixture or door or whatever, at *any* price! Very frustrating. But it sounds like you're the type who continues to persevere, so that's great!
My door had same problem, called and they sent me a new one but rep had mentioned a different door model piano style.. I told him that was wrong z bar, but he said sending the correct hinge free. I called when wrong one arrived and tried to order correct one again.. But, expected to get it free like the other. I was told that because door did not wear out and was due to some force that the door z bar Correct 4 hinge would be sent with a charge. I told them broke hinge that is several were rusted out and then any thing they saw in picture I sent was after. I sent picture to ID door since my lable was removed or feeled off door for model number. I went on line and many people said they were not given the free forever replacement part as advertised. In the end door is still not repaired. I am writing to the corporate offices to complain. They said they do not want the piano hinge returned.? Stupid. Never by from them again. Also someone wants ed $275. to install the z bar. Just what you did without the cut, The new bar would be $65. You are correct but may include shipping.? That is over $300. To put in a zbar? I don_t think I paid that much. Someone else would charge $500, for a new door and install. But not same quality door I have. Disgusted. Larson door z bar available in Walmart.
That’s unbelievable....So much for customer service!...I would call them back and ask to speak to a supervisor, and explain the problem to him/her....If the supervisor (get name) is not helpful, explain that you’re going to make a complaint with the Better Business Bureau....The BBB is usually pretty good at getting a resolution...Good luck!
My question is why does Anderson use such sorry hinges in the first place? Why are hinges worn out after just 4 years? Nothing but
Anderson door junk.
Things are made to break nowadays.
having the same
keep the commercials with a skip skip button
This doors suck azz! I have two of them, and one is barely used and they have creaked 3 months after install. Lubed 100 times nothing!
Thank you. Great video. I’ll be ordering my “Z” bar soon. We all appreciate the people who take the time to make helpful videos like this.
You’re welcome...Thanks for the nice comment!
@@beachtroll8344 Update: I called Anderson, and I gave them the serial number of the "Z" bar. It was a 200 series door, and the "Z" bar has a lifetime warranty, and Anderson sent me one absolutely free. The bottom two hinges of my old "Z" bar were broken. Two of the hinges on the new bar lined exactly, and the other two hinges required me to drill some new holes for the new bar. It came with wood screws for the house door frame, and I used the the self tapping sheet metal screws from the old bar for the new one for the storm door frame. I also had to cut off about two inches with a hack saw to make the bar fit perfectly. It came with plastic trim to hide the screws that would be visible from the outside. It took me a total of about 2 hours from start to finish, and the door closes great (I usually screw up everything I am fixing-lol). Thank you again Beach!
I've got 40 year-old storm doors with the same problem. I'm going to go back to wooden storm doors when I'm ready for the project, but what i did to keep the old doors working until I was ready to get rid of all that metal crap was to cut out the hinges from the stupid sidebars and put in $2 hinges and then caulk my cutouts. This was 2 years ago and it's still working perfectly. My house is a hundred years old. This metal storm door sht redudes your door width. If you treat the old wooden jamb with wood hardener and then apply a good oil-based primer, the old, original method is far, far better.