Thank you for the video! Being newly widowed, I was able to replace this bulb with no problems. The video was short and to the point as well as very easy to follow. You saved me a ton of money from having to go to my GMC dealership.
I see it’s been a year+, but I’m sorry for your loss. Bless you. I’ll admit to grinning to myself a little as I sit here, a widower, trying to see if this is something I can do myself or if I’m going to have to go a shop to get it done. I read your comment and thought, ( jokingly - of course) “If a girl can do it, so can I.” 😬🤦♂️ So, you’re my encouragement and inspiration! 😁 It looks easy enough - I’ll find out tomorrow. 👍🤞
You all are the experts!! I was able to swap out my failing factory HID's with new bulbs!! The install took me less than 20 minutes per side, and that is with me working slowly and meticulously!! Thank you! Do not remove this video!! I will need it years down the road for the next replacement!!
Thanks so much for the great video. Dealership wanted $750 to replace one bulb. I thought that was insane, and thankfully found your channel. I ordered the parts from your Amazon link, and in 45 minutes, was able to replace both bulbs. You're a life saver! I have subscribed, and will follow your channel from here on out! Thanks again!
All I know is this: I have a passenger side headlight shooting kind of a bloody-urine colour of light at the moment on my '17 Sierra. I looked at all the stuff between me and the head light assembly and thought - this is going to be a massive project which I will undoubtedly screw up. This video is such a help - you have no idea. Thanks for posting this.
Thanks for putting together this self-help video. I was able to replace both bulbs in my 2019 Tahoe using your video. One thing I found was that it was easier to remove the connector (with a flathead screwdriver) on the passenger side bulb prior to loosening the locking ring on the bulb. Great video and thanks for saving me some money!
Great video! Very good explanations.and I was able to buy the bulb for $20 at auto parts shop and replace myself quickly and easily and saved the $40 for labor that repair shop charged last time. Thank you!
My Osram replacement bulbs did not come with the white ring which the old bulbs had. You may want to mention how to remove the white bulb keeper ring. Great video thank you. save me $400.00 bucks at the dealer.
The lock ring is stubborn, and hard to reinstall. Had to use multiple strategies to get it back on. Note: the bulb costs $135, it's delicate, and you'd better be super careful not to damage it while installing.
Good video. I found the ring on the drivers side real hard to get it to rotate to get the light out. Part of it was just getting my hand in there. I used a screw driver to get the leverage on one of those tabs to get it to rotate. The passenger side light didn't have much cable at all and that was a real challenge getting the electrical connector connected to the light with such a short cable. Also those gray clips on the connectors are basically impossible to use without braking them. I broke them off and hopefully it stays connected but I think it will.
Got to the filter and tried to move it easily like you did and nope, gave it some solid pulls upwards and nope. Not sure what to do. Frustrating cause it was the only between me and the light bulb. Any suggestions?
@@THANOS_Discipleno, I figured it was those molex plugs and I just wasn't tugging hard enough and at angles. The right light works and I compared the two and it wasn't much difference in brightness so I left it.
The white ring does not come with the new bulb assembly. You need to take the white ring from the old bulb and put it on the new one. Also, the cable isn't very long to enable taking the bulb out without disconnecting the wire.
Hey Danny, any chance you can tell us best replacement part? I bought bulbs that obviously don’t fit and then watch your id so now needing to order correct part.
So many bulb videos compare the best ones to buy. All of them show a low beam and high beam comparison. All those bulbs in the videos i can put in my 2019 suburban since i have seperate low/high beam bulbs?
The wire on my truck passenger side 2016 Yukon Denali had no slack to pull out the bulb it was a pain in the ass disconnecting and connecting back up...
@@dannyjohnsonsgarage yeah I got it finally.. mine was on there really good and I was worried about breaking the plastic by putting too much force on it to get it off. Thanks :)
@@9753flyer Yeah, I swapped bulbs in the first video and actually had the new bulbs come in for the second video which required removing the plastic piece. I wish it was in both videos. Thanks
Hi, any idea why my Denali passenger low beam keeps turning on an off i been having this problem for the last 3 days i don’t if its just the light bulb that its about to go off or its another issue
I would think the bulb is the most likely since a wiring issue typically shorts the system and blows a fuse. It may just be corrosion or a loose connection. The bulbs are cheap enough I’d try replacing them. Here they are on my Amazon affiliate link www.amazon.com/DMEX-Hg-free-D3S-Headlight-Replacement/dp/B07F715HCL?crid=NA4OW63CMVGR&keywords=2015+yukon+denali+DMEX+bulbs&qid=1646412040&replacementKeywords=denali+dmex+bulbs&sprefix=2015+yukon+denali+dmex+bulbs+,aps,118&sr=8-1-spons&vehicle=2015-48-558------------&vehicleName=2015+GMC+Yukon&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVTQxTVlSUUQ3V0ZHJmVuY3J5cHRlZElkPUEwODM0MDAwM0U1UlVURjFUMEJIVyZlbmNyeXB0ZWRBZElkPUEwMTg3MTE0M0taREozMFFXN0dOTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D&linkCode=sl1&tag=2004047-20&linkId=248ff7b449600d0ccab8d3dfef525f22&language=en_US&ref_=as_li_ss_tl
I just bought a '15 SLT and the window sticker says I have Halogen Projector headlamps. This amazon product description say, "DOES NOT FIT if your car has stock Halogen/LED headlight." Am I reading this correctly that this will not be a fit for my Yukon? Or will these be a compatible upgrade for me?
I have a 2016 Yukon SLT but mine has halogen bulbs currently. Would these lights be supported with the wiring to get a better looking lights instad of having boring halogen?
@@gildardomedina8419 they would not work because you don’t have the ballast to run it. Instead, I would look at LED bulbs that will give better color and performance and not require the ballast to run high intensity discharge (HID) bulbs
The locking ring does not come with new bulbs. How do you remove it from the old bulbs and put it on the new ones? It appears that the locking ring is required to hold the bulb in place.
pull up on the side facing the engine away from the side of the car/ Basically lean over the fender from the side, grab the engine-side of the box and pull up. There are 2 rubber press-grommet things there. The 3rd hold-down is a slider that releases when you slide the box towards the engine
Has anyone who has done this experienced uneven coverage after installing the new bulb? I put in a new bulb in the driver's side and the directional light is shooting towards the center line and almost leaves a void straight in front of the truck (so the light is favoring left of center and is much brighter there and leaving straight out in front a little dark). My old bulb had nice even coverage throughout...thoughts?
Yea i believe oem is 25w and these are 35w so should be brighter. Watched the difference from 25 to 35 and went from 550 to 830 brightness just from the switch. 😁
Thank you! I just replaced the passenger side low beam bulb from your direction. I do have one question though. The auto parts place tried to sell me a small packet of grease to use to change the bulb. I didn't take it because you didn't use any in the video. What is your take on that packet of grease? I have a 2011 suburban that is different to change bulbs and have changed bulbs on it a few times and have never used that grease. I also have a 2017 suburban that I was changing the bulb on today for the 2nd time now in a few years. I didn't use the grease the first time in the 2017 either. Please share your thoughts on that grease packet. The girl was trying hard to sell it to me to prevent rust...I have never had rust on any. Thank you again!
What temp color is that you installed 6k? It looks way better then the factory yellow and where did ya buy it? Thanks for the easy to follow instructions. Wish all vids were like this
Yeah, it was about a 6k. The factory ones turn more yellow as they go out, so that’s probably why. I got them here www.amazon.com/DMEX-Hg-free-D3S-Headlight-Replacement/dp/B07F715HCL?crid=NA4OW63CMVGR&keywords=2015+yukon+denali+DMEX+bulbs&qid=1646412040&replacementKeywords=denali+dmex+bulbs&sprefix=2015+yukon+denali+dmex+bulbs+,aps,118&sr=8-1-spons&vehicle=2015-48-558------------&vehicleName=2015+GMC+Yukon&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVTQxTVlSUUQ3V0ZHJmVuY3J5cHRlZElkPUEwODM0MDAwM0U1UlVURjFUMEJIVyZlbmNyeXB0ZWRBZElkPUEwMTg3MTE0M0taREozMFFXN0dOTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D&linkCode=sl1&tag=2004047-20&linkId=248ff7b449600d0ccab8d3dfef525f22&language=en_US&ref_=as_li_ss_tl
Broke that little grey clip. ScrewDriver slipped. It's still holding though, so fingers crossed. Will check sometime between now and if it falls off to see if Chevy sells that grey clippy. Overall though, thanks! Key was the light does NOT rotate. :) I assumed it was a normal twisty lamp prior to this video. Had channel locks on that stupid square body trying to spin it.
Unfortunately I had to take mine to the dealer as the cable on mine is so short I can't even get in there to get a screwdriver on the tabs as in the video his cable is long enough for you have full access to removing the plug mine no way
I must have missed it . Can you please tell me specifically where you demonstrated how to take off the bracket that fits into the headlight area It's still a excellent video. Can I get a ❤️ if not thanks for your help 🙂
Got to the filter and tried to move it easily like you did and nope, gave it some solid pulls upwards and nope. Not sure what to do. Frustrating cause it was the only between me and the light bulb. Any suggestions?
I found it in another video. There are two rubber grommets holding it down just a hard tug on the side toward the engine. No locking ring on the 2018 GMC Sierra as it is incorporated on the bulb box.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Thank you for the video! Being newly widowed, I was able to replace this bulb with no problems. The video was short and to the point as well as very easy to follow. You saved me a ton of money from having to go to my GMC dealership.
Was this for the low beam or high beam?
I see it’s been a year+, but I’m sorry for your loss. Bless you.
I’ll admit to grinning to myself a little as I sit here, a widower, trying to see if this is something I can do myself or if I’m going to have to go a shop to get it done. I read your comment and thought, ( jokingly - of course) “If a girl can do it, so can I.” 😬🤦♂️ So, you’re my encouragement and inspiration! 😁 It looks easy enough - I’ll find out tomorrow. 👍🤞
@@eyenthesky1060 looks like low
You all are the experts!! I was able to swap out my failing factory HID's with new bulbs!! The install took me less than 20 minutes per side, and that is with me working slowly and meticulously!! Thank you! Do not remove this video!! I will need it years down the road for the next replacement!!
Such a quick clean video without any extra crap or stupid music!!! THANK YOU!!!
Thanks. More videos like it here if you’re interested ua-cam.com/play/PLIjr-uSYDZi7J7EQ1ErTn1Yzi6ET_3Ssr.html
Thanks so much for the great video. Dealership wanted $750 to replace one bulb. I thought that was insane, and thankfully found your channel. I ordered the parts from your Amazon link, and in 45 minutes, was able to replace both bulbs. You're a life saver! I have subscribed, and will follow your channel from here on out! Thanks again!
All I know is this: I have a passenger side headlight shooting kind of a bloody-urine colour of light at the moment on my '17 Sierra. I looked at all the stuff between me and the head light assembly and thought - this is going to be a massive project which I will undoubtedly screw up. This video is such a help - you have no idea. Thanks for posting this.
Thanks for putting together this self-help video. I was able to replace both bulbs in my 2019 Tahoe using your video. One thing I found was that it was easier to remove the connector (with a flathead screwdriver) on the passenger side bulb prior to loosening the locking ring on the bulb. Great video and thanks for saving me some money!
THANK YOU FOR THE VIDEO! No BS and straight to the point with great camera work!
❤😢
these directions were perfect, was able to replace my headlights in 20 minutes. thank you
Great video! Very good explanations.and I was able to buy the bulb for $20 at auto parts shop and replace myself quickly and easily and saved the $40 for labor that repair shop charged last time. Thank you!
My Osram replacement bulbs did not come with the white ring which the old bulbs had. You may want to mention how to remove the white bulb keeper ring. Great video thank you. save me $400.00 bucks at the dealer.
Perfect explanation. In and out in 15 minutes since I have a K&N filter that is easy to move out of the way.
Excellent video! Easily done.
Bonus: Had father son moment changing out the light behind the air filter.
The lock ring is stubborn, and hard to reinstall. Had to use multiple strategies to get it back on. Note: the bulb costs $135, it's delicate, and you'd better be super careful not to damage it while installing.
Good video. I found the ring on the drivers side real hard to get it to rotate to get the light out. Part of it was just getting my hand in there. I used a screw driver to get the leverage on one of those tabs to get it to rotate. The passenger side light didn't have much cable at all and that was a real challenge getting the electrical connector connected to the light with such a short cable. Also those gray clips on the connectors are basically impossible to use without braking them. I broke them off and hopefully it stays connected but I think it will.
Got to the filter and tried to move it easily like you did and nope, gave it some solid pulls upwards and nope. Not sure what to do. Frustrating cause it was the only between me and the light bulb. Any suggestions?
did you figure it out?
@@THANOS_Discipleno, I figured it was those molex plugs and I just wasn't tugging hard enough and at angles. The right light works and I compared the two and it wasn't much difference in brightness so I left it.
Simply the best I can’t thank you enough for making this video!!!!!!
Appreciate you! Definitely utilized this video tonight and it got me where I needed to be. #FreeGame much needed. Thank you 11.4.23
Thanks man! This video was very useful for me, appreciate it.
Very helpful. Wasn’t this smooth. Knuckles are beat up and my patience was tested. Easy out, painful going back in. Good video though.
Do you have any videos for daytime running lights?
The white ring does not come with the new bulb assembly. You need to take the white ring from the old bulb and put it on the new one. Also, the cable isn't very long to enable taking the bulb out without disconnecting the wire.
The video description has a link to more info on the tab
How do you get the white ring off of the old one? 🤦♀️
@@dannyjohnsonsgaragecan you send link I don't see it in video description
@@shellyhunt6256 47 seconds into this video
ua-cam.com/video/RTj0zS-vzDA/v-deo.htmlsi=wzBlVHjOtk5CR_7e
@@JarenEarnshaw 47 seconds into this video
ua-cam.com/video/RTj0zS-vzDA/v-deo.htmlsi=wzBlVHjOtk5CR_7e
Great job..excellent video easy to follow
I just did this installation but now I have no cruise control. Is there anyway removing air box could cause cruise control not to work?
Hey Danny, any chance you can tell us best replacement part? I bought bulbs that obviously don’t fit and then watch your id so now needing to order correct part.
Did you ever find the replacement part? Are there aftermarket brands available?
Thanks a ton! Glad my first run at it was the driver side. Appreciate the video so much. Great work cinematically too.
Thank you for your help great vídeo I change the headlight my self
Does the existing collar need to be installed to the new light????
Bulb bracket disassembly at 47 seconds into this video ua-cam.com/video/RTj0zS-vzDA/v-deo.html
@@dannyjohnsonsgarage Thanks!!!!
@@dannyjohnsonsgarage Any recommendations for the high beams? Thanks in advance.
I will echo what everyone else has said, great video and thank you!
So many bulb videos compare the best ones to buy. All of them show a low beam and high beam comparison. All those bulbs in the videos i can put in my 2019 suburban since i have seperate low/high beam bulbs?
Yeah, they are two different bulbs on this setup
How do u get locking ring off old light and onto new light???
Bulb bracket disassembly at 47 seconds into this video ua-cam.com/video/RTj0zS-vzDA/v-deo.html
The wire on my truck passenger side 2016 Yukon Denali had no slack to pull out the bulb it was a pain in the ass disconnecting and connecting back up...
same here
Great.. but how do you get the white bracket off the old bulb so you can put it on the new bulb???
Watch this at 47 seconds in. It pulls straight off
ua-cam.com/video/RTj0zS-vzDA/v-deo.html
@@dannyjohnsonsgarage yeah I got it finally.. mine was on there really good and I was worried about breaking the plastic by putting too much force on it to get it off.
Thanks :)
@@9753flyer Yeah, I swapped bulbs in the first video and actually had the new bulbs come in for the second video which required removing the plastic piece. I wish it was in both videos. Thanks
That gray clip is a retainer
Not easy to get out without unplugging first. Also, there is a gray clip that has a latch that you have to make sure and flip up and then pull.
I broke that clip. Just the side. Hope it holds. I assume GM only sells the whole harness. If she falls out, hello electrical tape I guess.
Hi, any idea why my Denali passenger low beam keeps turning on an off i been having this problem for the last 3 days i don’t if its just the light bulb that its about to go off or its another issue
I would think the bulb is the most likely since a wiring issue typically shorts the system and blows a fuse. It may just be corrosion or a loose connection. The bulbs are cheap enough I’d try replacing them. Here they are on my Amazon affiliate link www.amazon.com/DMEX-Hg-free-D3S-Headlight-Replacement/dp/B07F715HCL?crid=NA4OW63CMVGR&keywords=2015+yukon+denali+DMEX+bulbs&qid=1646412040&replacementKeywords=denali+dmex+bulbs&sprefix=2015+yukon+denali+dmex+bulbs+,aps,118&sr=8-1-spons&vehicle=2015-48-558------------&vehicleName=2015+GMC+Yukon&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVTQxTVlSUUQ3V0ZHJmVuY3J5cHRlZElkPUEwODM0MDAwM0U1UlVURjFUMEJIVyZlbmNyeXB0ZWRBZElkPUEwMTg3MTE0M0taREozMFFXN0dOTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D&linkCode=sl1&tag=2004047-20&linkId=248ff7b449600d0ccab8d3dfef525f22&language=en_US&ref_=as_li_ss_tl
I just bought a '15 SLT and the window sticker says I have Halogen Projector headlamps. This amazon product description say, "DOES NOT FIT if your car has stock Halogen/LED headlight." Am I reading this correctly that this will not be a fit for my Yukon? Or will these be a compatible upgrade for me?
I have Halogen as well. Did you ever find a replacement bulb?
Alright Danny you got me watching a video about a car I don’t own, but I’m still watching it lol Nice video! 👍🏻
Ha ha! You never know when you’ll have some HIDs in a car someday 😀
@@dannyjohnsonsgarage Haha well in that case that’s very true
For some reason boss the assembly won’t come out for me like the cord is to short
dont know u ever got it but i had the sand problem,just uplug it while its in place then lock new one in place and plug in
@@zakaijohnson9421 yeah i had got it good look, idk why the driver side cord wouldn’t come out
Any recommendations when the bulb does work but it flickers some times? A fuse maybe? Left front side
It may be the actual ballast in that case. It’s hidden behind the bumper I believe
Help please! Yukon 2016 slt lx here. Conector on unit is 2 pin only. (halogen ones) any idea what to do? Please and thank you!
I have a 2016 Yukon SLT but mine has halogen bulbs currently. Would these lights be supported with the wiring to get a better looking lights instad of having boring halogen?
@@gildardomedina8419 they would not work because you don’t have the ballast to run it. Instead, I would look at LED bulbs that will give better color and performance and not require the ballast to run high intensity discharge (HID) bulbs
@@gildardomedina8419 something like this www.amazon.com/dp/B0BPXJ78ZX/ref=cm_sw_r_as_gl_api_gl_i_Y9GT50HYHBSTBJXHG2MQ?linkCode=ml2&tag=2004047-20
Question
What colour is the bulb
I want to change my fog light the same colour
They are 6k on the color, which comes out as mostly white but a hint of blue. 7k would be more blue and 6k would be more yellow
Thanks for responding
I took out the light out but how do you remove the locking ring so that I can put it on the new bulb
Watch at 47 seconds into this video. ua-cam.com/video/RTj0zS-vzDA/v-deo.html
When changing the HID's do we unplug the battery
That’s always a good idea
Cool thanks bro
Thank you so much 😊
Wish better osram or Hella for tahoe 2018 ??
Thanks again
I can't say from experience. Sorry
My 2018 GMC Yukon does not have this white plastic ring that hold the bulb. Any videos that show how to remove the bulb? Thanks.
It may not be HID headlights. I don’t know what they would be like otherwise so another UA-cam video may help
What kind is the bule ish one
6k is white 7k is more blue, 8k would be almost purple etc
The locking ring does not come with new bulbs. How do you remove it from the old bulbs and put it on the new ones? It appears that the locking ring is required to hold the bulb in place.
The video description has an additional video showing it that I made in another video
My air box does not “lift right out.” It is definitely held down somehow, but I can’t figure out what to do to get it out. I have a 2015 Tahoe
pull up on the side facing the engine away from the side of the car/ Basically lean over the fender from the side, grab the engine-side of the box and pull up. There are 2 rubber press-grommet things there. The 3rd hold-down is a slider that releases when you slide the box towards the engine
Do you recommend LED over the HID??
I feel LED would be more reliable than a ballast for HID, but it also depends on what setup is being used. I used these as a direct replacement
@@dannyjohnsonsgarage 👍
Did your new bulb come with a locking ring on it ?
No, I transferred the old one over. The video description shows my other video and where to look
@@dannyjohnsonsgarage thanks, I ended up doing the same.
My issue is my replacement bulbs are aftermarket and I don't have the the white tabs that needs to be rooted counter clockwise. Any suggestions??
You remove the white locking tab off the stock bulb and rotate it onto your new one
Thank you for posting this!!!
Does this work on a 2020 Yukon SLE? Tried going through your link and Amazon says "this will not fit your vehicle"
SLE may not have the ballast for the high intensity discharge (HID) headlights. Is it a regular bulb? If so a good LED bulb will probably be best
Air box is like glued down, not budging
Thanks for video! Excellent, efficient and articulate description. Saved me a ton of time!
How bright it’s?
It seems the same as factory
Does that single bulb do both low and high beam or is there a separate bulb for the high?
I believe the high beam is a different bulb
Hmmmm, no white ring on my 2019 Sierra, mine has a Phillips 04328 bulb.
Has anyone who has done this experienced uneven coverage after installing the new bulb? I put in a new bulb in the driver's side and the directional light is shooting towards the center line and almost leaves a void straight in front of the truck (so the light is favoring left of center and is much brighter there and leaving straight out in front a little dark). My old bulb had nice even coverage throughout...thoughts?
There are generally adjustment screws you can turn to move the beam where you need it (unless the housing is broken or not in correctly)
My air box is locked in any advice
Yeah mine is too on my 2020 Suburban. Just ridiculous that you have to remove this much stuff just to change a light bulb.
Thank you for this video ❤❤❤❤❤
We're these bulbs an upgrade from the factory hid bulbs originally?
About the same quality. Slightly more blue but maybe that’s cause they were burning out. I’m happy with them so far! Especially for the price!
Yea i believe oem is 25w and these are 35w so should be brighter. Watched the difference from 25 to 35 and went from 550 to 830 brightness just from the switch. 😁
Thank you! I just replaced the passenger side low beam bulb from your direction. I do have one question though. The auto parts place tried to sell me a small packet of grease to use to change the bulb. I didn't take it because you didn't use any in the video. What is your take on that packet of grease? I have a 2011 suburban that is different to change bulbs and have changed bulbs on it a few times and have never used that grease. I also have a 2017 suburban that I was changing the bulb on today for the 2nd time now in a few years. I didn't use the grease the first time in the 2017 either. Please share your thoughts on that grease packet. The girl was trying hard to sell it to me to prevent rust...I have never had rust on any. Thank you again!
It definitely is something you can add to any electrical connection. It’s a good idea.
It's dielectric grease. Good idea to use it
How do I pull off the lock tab from the old bulb?? I can't find a single video on that.
Watch 48 seconds in ua-cam.com/video/RTj0zS-vzDA/v-deo.html
Do these bulbs fix the DRL as well? I replaced yesterday and my DRL is still out.
I think the DRL or at least on my Yukon is the led strip in the headlight.
Sir you FOGOT TO SAY THAT YOU HAVE TO REMOVE WHITE RING OFF OLD BULB AND PUT ON NEW BULB FYI !!!!!
It’s in the video description
@dannyjohnsonsgarage where can I get replacements of the white ring if it broke? I can't find online - appreciate any help!
Thank you so much ! Great video !
What temp color is that you installed 6k? It looks way better then the factory yellow and where did ya buy it? Thanks for the easy to follow instructions. Wish all vids were like this
Yeah, it was about a 6k. The factory ones turn more yellow as they go out, so that’s probably why. I got them here www.amazon.com/DMEX-Hg-free-D3S-Headlight-Replacement/dp/B07F715HCL?crid=NA4OW63CMVGR&keywords=2015+yukon+denali+DMEX+bulbs&qid=1646412040&replacementKeywords=denali+dmex+bulbs&sprefix=2015+yukon+denali+dmex+bulbs+,aps,118&sr=8-1-spons&vehicle=2015-48-558------------&vehicleName=2015+GMC+Yukon&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVTQxTVlSUUQ3V0ZHJmVuY3J5cHRlZElkPUEwODM0MDAwM0U1UlVURjFUMEJIVyZlbmNyeXB0ZWRBZElkPUEwMTg3MTE0M0taREozMFFXN0dOTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D&linkCode=sl1&tag=2004047-20&linkId=248ff7b449600d0ccab8d3dfef525f22&language=en_US&ref_=as_li_ss_tl
Great video! Spot on step by step instruction!
Great video very helpful 100 %
Broke that little grey clip. ScrewDriver slipped. It's still holding though, so fingers crossed. Will check sometime between now and if it falls off to see if Chevy sells that grey clippy.
Overall though, thanks! Key was the light does NOT rotate. :) I assumed it was a normal twisty lamp prior to this video. Had channel locks on that stupid square body trying to spin it.
Good video… but you did not explain that the attachment collar must be removed and reinstalled on the new bulb!!… 😉
Yeah, I put it in the video description
“Bulb bracket disassembly at 47 seconds into this video ua-cam.com/video/RTj0zS-vzDA/v-deo.html
There is a tab on the connector to the bulb.... its grey
It’s in the video description
This doesn’t work for me. I need the kit because I have halogen bulbs
Work like a charm !
Gracias por tus videos??
Unfortunately I had to take mine to the dealer as the cable on mine is so short I can't even get in there to get a screwdriver on the tabs as in the video his cable is long enough for you have full access to removing the plug mine no way
Video helped a lot thx.
Great video thank you!!
Good video but you missed taking off the brackets
See the video description
I must have missed it . Can you please tell me specifically where you demonstrated how to take off the bracket that fits into the headlight area
It's still a excellent video. Can I get a ❤️ if not thanks for your help 🙂
That air box doesn’t come off that easy
Also, the white turny things on the old light has to come off to put on new light
I put some addition instructions in the video description, but my box was probably removed Before I bought it and already loose.
Thanks
Thank you sir...............
We just need a light bulb change not the whole back part.
Make sure not to touch the bulb or you have a problem
This will help. Thx
Got to the filter and tried to move it easily like you did and nope, gave it some solid pulls upwards and nope. Not sure what to do. Frustrating cause it was the only between me and the light bulb. Any suggestions?
I found it in another video. There are two rubber grommets holding it down just a hard tug on the side toward the engine. No locking ring on the 2018 GMC Sierra as it is incorporated on the bulb box.
You can remove the bolts for the coolant tank and move it around to get more room to work