Whirlpool Cabrio F6 E2 error code EASY FIX!
Вставка
- Опубліковано 29 вер 2024
- My mission is to keep your appliances running for as long as possible for free, or as cost efficient as possible.
Remember to unplug your appliances from power and shut off any water before attempting any repairs. My videos are for entertainment purposes only and are not to be taken as repair advice. Please consult a certified appliance repair technician if you are uncomfortable doing DIY work on your appliances. Proceed at your own risk.
Here is a link to the first video I did on the F6 E2 and F6 E3 error
Maytag Brovos XL won't start won't turn on error code F6 E2 / F6 E3
• Maytag Washer won't st...
My washer here in this video is a Whirlpool Cabrio variant, but essentially has the same style CPU board.
If you found this video valuable and saved you some time and cash, please consider donating to the cause! I’d love to be doing videos full time, bringing DIY info to as many people as possible, saving you all time, money, and the frustration of calling in a repair person or having to buy new appliances. Donations are always welcomed on my Venmo too @joshcobb4100 which all funds will go to making more, better videos! But really…I just hope this video helps someone out and saves them a headache!
Please like, share and subscribe! Thanks guys!
Thank you sir!!! I got a message from a repair guy saying he had bad news and then I found your video. TYSM!!!
Wow! What a fix. So easy and it worked. First, I tried unplugging the machine a few times to see if it would reset. I got all the things you mentioned, wouldn't light up, looks like it going to work, but doesn't. Then the last time the error code popped up. So, I looked up the error code and found you. After I did the fix, I put it back together, but I was so excited I forgot the nail polish. So, I opened it back up and applied the nail polish. Good to go! Thanks again for the savings. Whirlpool needs to apply the nail polish as part of their manufacturing process.
I'm getting an intermittent F6/E3, it'll start making unfamiliar alert noises, blink these codes, then not allow any button responses except to power it off. After I power it back up it works fine for weeks with no problem. I'll definitely be investigating the board though, I'll nip it in the bud before it decides it won't allow for a power cycle fix. I've owned this washer for 10 years, it's served me well and is still in great shape otherwise.
So - I got the F6-E3 error and found another video explaining what to do. Bad news - I didn't really dig in to it until AFTER having a useless technician come out, charge me $150 - only to tell me that I needed to replace the washer. He said that they would send it away to have the UI panel repaired and by that time - I may as well buy a new one. I wish I would have found and watched your video first - because you said that exact thing - like what the technician would say! Anyway - I watched another video which was really good at showing me how to take the unit apart - which I can do very quickly now - but that video only had me wiping off the board contacts with an alcohol pad to clean them. Your video here - actually had the suggestion to scrape away the corrosion - THEN clean thoroughly with the alcohol and Q-Tips. Because after my first attempt at repair - with just the simple wipe down with the small alcohol pads - the error and issue came back after 3 loads of laundry. I feel confident that the more thorough scraping and cleaning (the Q-Tips were black this time) will net better results. I do have a question, Josh - you mention that the issue will eventually come back - I didn't apply the gel coat (great hack by the way!) - since the machine worked for many years without issue (6-8 maybe) do you feel like the board is compromised now and that sooner rather than later, I will need to clean again and for sure seal it - or will I get several years again before that much corrosion causes issues? Sorry for the long message - but I had to vent about the bummer of losing $150 but of the victory in saving several hundred in the long run! Great video!
I would suggest getting a clearcoat on it ASAP, I use clear nail polish now. It’s more susceptible now to corrosion and the more you scrape it the more brittle the connections will become.
Thanks for this! Fixed it in 10 minutes flat!
You are welcome! Glad it helped!
THANK YOU SO MUCH for a very clear video... I followed your instructions and even applied the nail polish to the electrical connectors as suggested and were able to power up my washer after 1 hour.
Awesome!
Thanks for the info! It worked for me! However, I did waste a bunch of time (and frustration) trying to figure out how to release that top control unit panel from the main washer. The video was not clear on what to use the plyers on to release. I eventually figured it out on my own. My constructive criticism would be to never do a video on how to disassemble something (to again access) without the setup being fully ready to be disassembled. i.e. Don't already have some things disassembled ahead of time, because that is likely not how it will be for the ppl watching the video and so it will create some confusion. Again, thank you for taking the time to do this! Saved me $$$!
Thank you so much for this info and how to take the control board off. I was able to fix my 3 year old washer. Saved me plenty of money.
Awesome! Glad I could help!
I just did this and it freaking worked, saved me a bunch of money by not having someone come look at it. I feel like I need to send you some $$$. Thank you very much and I subscribed to your channel
I’m just glad it worked for you! Thanks for subscribing!!
Thank you. Just fixed our washing machine and got to look like a hero.
Can’t believe it but I really thought mine woukd be one of the five out of forty that wouldn’t work. But I sure as heck worked thanks man great video.
So glad you found this and shared it. Outstanding. Haven't seen a fix for a factory flaw this good since 1970's Dodge car ballast resistor fiasco.
This is amazing! Had this error pop up previous 2 years and just fixed itself somehow but this time it didn’t. Tech was saying need replaced. Legit did this in 5 minutes and it is fixed! You are awesome!
Worked for me, much appreciated, thank you sir.
You're welcome!
Thank you so much for this ! Very helpful and it worked!!!
You're welcome! Glad it helped!
Fixed thank you! Would you have a guide for that same model dryer, how to remove the blower fan? Didnt find it in the back and no removable panel in front.
I don’t. Just do the videos if time and opportunity allow.
Thank you!!! This worked like a charm!
Thank you trying this today
I hope it worked out for you.
You’re a life saver
Yay!!
How do I pop off the metal bracket on the left side with the spring in the way to take the panel off? The right side is easy but I can’t get to left side to push the metal clip in
I have used pliers and felt for it, also gone from the top with a putty knife. You just have to be careful not to mark it up going from the top.
Works for me. Thanks.
What a stupid design (smart design to encourage new parts/units). Thanks, Josh!
It almost seems rigged lol but we will always find a better way!!
This technique worked for my F6-E2/3 error on my 4 year old Cabrio washer. Thanks for saving me a pricey repair job (or the cost of a new washer) and not trashing an entire large appliance over a tiny bit of corrosion!
You’re welcome! ☺️
We had an E2/F6 error on a cabrio washer. We cleaned with rubbing alcohol and q-tip and the first test run was a success! Hopefully more to come so thank you for this video!
The video is great thank you. But why wouldn't the manufacturer have to repair something like this? It's obviously a design flaw... or intentional obsolescence....
Thank you for posting this info..worked for me…🎉
Dude! All the stars to this. Works great!
Awesome! Glad it worked man!
My wife said "The washer is broken, I think I'll try to fix it". Normally I am to one to fix things, by breaking them, then calling and paying for a service tech. She just messaged me that she was successful!
Yay! Glad to hear it! Saved some $$! That’s awesome! 😎
This video saved me my washer wouldn’t turn on and I took these steps and now it turns on works perfect thank you 🙏
Glad it helped!!
Thanks, after various problems with the buttons, I figured there was a loose wire, but found nothing. Then I found your video after doing the diagnostic codes, and seeing E2 F6. I used to work in computers, and was curious if the moisture is causing a short circuit on the board? (I wish they made these better!)
You are correct. Little clear nail polish goes a long way in preventative maintenance once you've done the repair. Thanks for watching!
Bro you the fucking man! You saved me big money!
It worked for me thanks ! appreciate it I was really worried.🎉
I followed your instructions including under the speaker. I did not have much corrosion to start with but I cleaned abd scraped them all. Washer still won't turn on, but I can get the error code to show up by pressing the 3 button pattern. Any ideas on what I may need to do other than buy a new control panel? Thank you.
Unfortunately it sounds like you have done your due diligence....new control panel is probably what's next. Make sure you cover the new panels open area with some clear nail polish to keep this from happening again down the road with the new panel. Good luck!!
12/23/23 Thanks for this video man you save my Christmas bro . Thanks followed youre vid and it worked great. Thanks.👍💯
Well Merry Christmas Bro!
A mi me funcionó Perfecto…. Gracias por compartir tus conocimiento con nosotros 😊… me ahorro bastante dinero haciéndolo yo
Thank you,,,The build up was actually under the speaker. Even though you did not specifically show to go there I knew what I was looking for. There were 2 that were not bad but covered in enough black build up that it stopped the washer from working.Cleaned with the q-tip and alcohol and she fired right up . I can't tell you have thankful I am and wonder how many of the washers were needlessly tossed. I called a service repairman before I did this research and he said nothing I could do, just buy a new washer...SMH.
Good job!! Keep it going!!
Bro, thank you so much for this. It worked for me and was pretty simple with your instructions. You are the man!
Glad it helped!👍😎
How do I get the top piece separated if the clips are plastic? Don’t want to break them while trying to access the control panel.
Hard to say without seeing it. Sometimes I access the clips that hold the console down by lifting to whole lid up and getting after them from the bottom with pliers. Hope that helps.
Wow, a great video and the best fix I've seen. It absolutely worked and its crazy that such a small thing, almost too small to see, was the problem.
Thanks so much, those of us who still like to repair things sincerely appreciate your effort's.
Glad to help!
I like thinking as far as keeping things running and not to send appliances to the landfill.@@joshcobb4100
what if you get them codes AND when you plug the machine in there is a spark in the power outlet?
Board might be too far gone.
Thank you ❤ from Phoenix Az. 👍
You are so welcome 🤗
Unfortunately, my is one of those that didn't fix the problem. Any other suggestions before I go and buy a new washer?
Nope. If it were me, I’d buy a new washer instead of a new CPU board. Be sure to get a surge protector for your outlet! Good luck!
We ended up buying a new set. Thanks for your help.
Can you please provide the part number for the board you cleaned? I need to order one. TIA
You will need to take your model number and go to a website like a appliancepartspros.com and look at your parts list to determine your exact part number for your specific washing model. Then you can take that OEM part number and check websites like Amazon, Amazon or eBay for a better price.
@@joshcobb4100can I buy just the board or do I need to buy a new console to get the board? I have the part number W10861501
Would you recommend reflowing the solder on the pads - that was what occurred to me when psyching myself up for the job.
…and it’s fixed. Thanks!
Great!! Good job!!
What about for my front load whirlpool washer :(
Totally different animal.
just tried this ran to go get clear nail polish, will comment if it works.
hasn’t thrown a code just yet, if this works, can i tell my boss i certify as a plumber/electrician?
Umm....yep 👍
thanks for the video
This is amazing! My washer has been acting up for months and it finally bit the dust and would just show the error code F6 E2. I was able to fix this myself (and I am NOT handy!), thanks to this video!
Yay! Glad it helped!!
Thank you Sir! You are the man 🫡🫡🫡
Happy to help!
Do you think this could be the issue if I don’t have the “steam” version. Lost after a power outage. E1 F5 code.
Possible but you might be facing a different issue. You could try unplugging your machine and pushing the power button for 20 seconds. Then leave the machine unplugged for five minutes, plug it back in (after checking your breakers and the outlet and verifying they are good) and cross your fingers.
@@joshcobb4100 I did do all of that with no luck. The panel comes on but when I push the start/pause button it just dings over and over.
I just googled the code and it shows a door lock switch error. This sounds correct based off what you just said about trying to start it and it just beeping at you. Might be worth ordering a new door lock switch before you try a whole new panel or new washer.
@@joshcobb4100 ah ok. Do you think these are easy to replace on our own?
THANK YOU SO MUCH for posting this! My washer was unresponsive to any push of any button. I did this easy fix (after getting that code) and it WORKED!!
Hell yeah that’s what I like to hear!
Great info
My lid lock stopped working recently and was able to replace it (fixing the old part it didn't work). I figure something like this is coming up next, so SAVED! Why the heck doesn't WP protect all the contacts better?
Hi Josh, thanks for your videos, they are very helpful. I have the same washer "Cabrio" and am getting a code F2 E3 and cannot find any videos on this code combo, any suggestions? Thanks
What a legend
Thank you so much! I work in apartment maintenance and this will save us lots of money. Did it for the first time and it worked 👍🏽
THANK YOU! I just fixed our washer with this. So easy to do with your instructions. You saved me a lot of money!
Josh, after watching your video you saved me whatever the amount of money it would cost in 2024. Your explanation and processes worked perfectly. Thanks a million.
Awesome! Glad it helped!!!
Thank you Josh! I never comment on UA-cam, but I wanted to tell you that this is the best video on here. When we plugged our machine and turned it on and we got beeps and no more error codes, and it didn’t turn off halfway through the cycle, I think I almost cried. You’re the best!
Yay! Well good job and I’m glad I could help!
Thanks! Totally worked.
Thank you so much for this! This fix saved us from another service call and how we've replaced one circuit board previously which cost us $400. Was able to do this in less than an hour and only cost me 2 Q-tips! Definitely try this fixe before you call a service company!
You are one of a kind. I did what you said in the video and it worked . You saved me a lot of money 😊😊
Great! You’re welcome!
Thank you so much!! Took me a LONG time to remove the dashboard thing, but after that it was a breeze.
Hi! My washer turns on but the cycles beeps when I press on it but it’s not activating anything not even my start button it’s just stuck on mixed cycle can u help me please
Thank you! I came home from vacation, and it wouldn't turn on at all. After checking the breaker and outlet, I watched your video. I cleaned the area under the buttons and it worked! I haven't done the nail polish part yet, but I will soon. Thank you so much!
You are welcome! Glad it helped!
The timer gos up and down in time unplug to get it to stop can't fix myself is it going to cost alot
On the rinse / spin?
Filling
It might be adding more time if it’s taking too long to fill up with water. If you turn your water off and disconnect your hoses, check the filter screens there and see if there’s any clogs. You also want to make sure the elevation on the drain hose is at least 3 feet, so the water is not draining out as it fills up. Start there!
Thanks! I saved a bundle doing this myself and only took about 45min due to my overly cautious nature and cleaning up the washer as well.
THANKS!!! I’m glad it helped, thanks for the tip!! 😎😎
Listen to this guy, it actually works. Thank you for the info, you saved me a lot of cash 👍
My Whirlpool Cabrio washer with the Steam Clean option is working again thanks to this “How To” video. I can only imagine how much $$$ and down time you saved me. I did have to buy the nail polish 😁, but a couple dollars is literally a small price to pay versus a professional repair or a new washer. THANK YOU Josh!! 👍👍
Glad it worked for you!!
Plan on picking one up from someone for $35 hope this is the issue so I can get a decent machine dirt cheep lol
Hey Josh. Thanks for posting this. I just used your method to fix our washing machine. Well Done!
Thanks, good video! Okay, tried the quick fix and I continue to get a F6E2 or 3.. The corrosion is removed and it looks good but doesn't work and I've done a reset and left power off for a while... When powering up I get the same issue via diagnostics. I would think getting a new "Whirlpool WTW8500DC2 Console - Genuine OEM" at ~$185 that had the corrosion would be the right part to get or do I need to get the Control unit at ~$295? BTW, I did check the cable continuity and it was fine.
Sometimes the corrosion can run deep and you just have to get a brand new board. If you do, I suggest coating the new board exposed portion with clear nail Polish to avoid issues in the future.
You saved the day, my friend! Much appreciated!
Thanks reset didn't work so I tried this and went through once so far. So I'm happy it worked. I'll add to comment whenever it goes wrong if it does. Wish it was a step by step instead of you already removed bit. But it did make the video fast so works for me, I didn't know the clamp I had to use the pliers was metal kept messing with the white plastic lol hope this tip helps the next fool.
But you did it!! Great job!!
Thank you!! I replaced the board a few years ago because of this error and it just happened again. I found your video and had it fixed in no time. Hopefully this stays fixed now!! I really wish I would have known about this a few years ago; I'm sure I wouldn't have had to replace it then!
I touched the Q-Tip to those terminals and it instantly fixed it.
My tabs were in a spot that were harder to get to, to release the screen but otherwise was so simple. Thank you!
Yay! Good job!!
Most houses in FL have garages laundry rooms, IE high humidity. Why doesn’t the manufacturer coat the connections after a function check? Because they want yiu to buy a new part or washer just after the warranty expires!
Tho I agree with you, it's also a pain when they do coat them and they need work. It's either not coated or drowned in epoxy LOL
EXCELLENT video! Worked perfectly! Thanks Josh for the amazing insight!
Glad it helped!
Josh, great video. Living in Mexico it can hard if not impossible to get parts or to get parts within a reasonable time. My Cabrio is now working perfectly. Can't thank you enough.
Awesome glad it helped!
It worked, had to create an angled file from a flat file, and my clear nail Polish had a violent tint… BLUF, thank you so much . PS could they make it any harder to access the electronics? 😤
Great!!
Worked like a charm. My machine would not turn on. Did your procedure and now everything works great. Thank you.
Just watched you video and you saved me from buying a new washer. Thanks for making video and I will support your channel
Awesome! Thank you!
Worked perfectly 👍🏼 My board was very corroded. The worst part was under the buzzer.
Thanks a million times! It worked!🎉❤
Thank you so much, this was easy to fix and save me from having to replace the whole control board. People like you make the internet a better place!
THANK YOU SO MUCH!!! You just made my whole week! I'm glad I could help!!!!
Great video! If you have this issue, the best chemical to clean with is Deoxit-D5 and q-tip/swab. Then apply a thin layer of conformal coat to seal out future moisture. This is what is done for mil-spec electronics that need to perform in high humidity environments. Easy to find both on Amazon, etc.
Thanks for the tip!
The question is, why don’t they do the coat before selling it, no reason to have this issue every 2-3 years even after replacing original console
It worked
Great! 👍🏻
Dude, you rock! Thank you so much for this awesome video My son and I just fixed our washing machine. It broke down in the middle of a cycle and we had no idea what to do until we found your video. About an hour later it's working and I know with the fingernail polish it will continue to work and not corrode again. We thank YWHW for you and we hope that you and your business are blessed. 😊
Awesome!! Glad to be of service! Good job!!
Thanks for saving me $550. Hope this helps a little in your journey.
THANKS! It does!!!
I put off fixing my washer after a few google searches and seeing it as a $250 plus repair just for parts. Did a search today and came across this video and glad I did. This worked me for thank you so much for posting videos like these.
You bet
Thank you, thank you, thank you. It fixed my washer. The only thing I added was to tape the lid shut so when I flipped up the top there was no danger of the glass lid coming off.
Good call…..at least they backed off the spring loaded lids that opened like Mike Tyson with a score to settle….
Fixed my washer!! You rock!
Saved me from buying a new washer. Put $600 back in my wallet. Thank you.
Awesome!!
Thank you for this video.
You just saved me $500 on a new washer. 🙏
Yeeeeessssss!!! Sweet!
Thank you so much for detailed instructions. Our machine works now👍
Great to hear!
So I’m a licensed nail technician, and I happened to have all these tools that were needed, it took me 5 mins after watching your video and I just ran a bleach towels load, THANKS SO MUCH IT WORKED!!!!!! Followed your visuals from start to finish, forever fan now!
Yay!!! Thanks!!!
Hey, I am a cosmetologist! Hopefully, I have the same tool!
@@HeyAuntieShaylaJ girl my washer still going strong, I fixed it like a year ago. Good luck!!
I have a Cabrio just like this one, 11 or 12 years old. Had the F and E codes, but early symptoms were: no more sounds and delayed response time when selecting washes. Also, sometimes it would keep washing without the time winding down. I cleaned the contacts, as noted in this video, and nothing changed. I decided to make sure I cleaned them as well as I could, so I took the control panel completely off (thanks for the disassembly tips). I sat at the kitchen table with a magnifying headset with light and cleaned better. However, I took what I think was the speaker/buzzer assembly off. It is a black square right there on the panel with two screws. There were other contacts back there that were corroded. I cleaned those and reassembled the washer. Plugged it in and turned it on. When I heard the tones again, I knew I had it fixed. It works like a champ, and I don't have to spend $700 on a new one (YET). The video is awesome and spot on. Josh, thanks for publishing this. You rock!👍
This saved me!! Thanks for the speaker tip!!!!!
Great tip!!
OMG I think this fixed mine, too! I didn't think mine looked corroded, but I took it apart like you showed and cleaned the contacts with alcohol. Plugged it back in and I'm doing a load of laundry now. Fingers crossed. Thank you so much!
Did the same before and it worked!!
Tysm you saved the day. Washer works again !!