Fusion 360 Tutorial - How to get a handle on Assembly and Joints in Fusion
Вставка
- Опубліковано 23 чер 2024
- It is time to dig in and get a handle on assembly and joints in Fusion 360. This video comes with three examples and you can download the models by clicking the link below.
Want to learn more about Fusion 360? Check out this link:
autode.sk/2bZypPp
Vise
a360.co/2e3GCBJ
Chuck
a360.co/2e3I333
Table Assembly
a360.co/2e3Jheu
Table
a360.co/2e3Hnea
Clamping set
a360.co/2e3GTV5
SUBSCRIBE!
ua-cam.com/users/subscribe_widg...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
contact@larschristensen.org
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/ - Наука та технологія
You're a natural teacher, thanks for these videos!
You are so very welcome :-) Thank you for watching!
Thanks Mr. Christensen, your HowTos are among the best HowTos on UA-cam. Keep Going.
Thank you, Arne :-) Super happy you find it helpful.
Still appreciating your fantastic videos. Thank you for all that you have done for the world of engineers. I always recommend your videos to every person wanting to add to their skills in the maker's community and beyond.
Lars, you have by far, the best tutorials for Fusion 360. I search for your videos whenever I need to learn or refresh my knowledge.
Lars, this is awesome man. I've been using parametric CAD for 21 years and the joint system here just blows me away.
Lars, you cover a lot of ground very didactically - Have been a pleasure learning with your videos about Fusion. Keep the great job up
Excellent tutorial. Well paced. Deliberate where it needs to be. No nuance lost in the demonstration and explanation. One of the few channels I am subscribing to.
You're a great teacher. Love you teaching style. Always learn a lot from your videos.
I really appreciated your videos. You are a lot easier to follow than any of the other instructors on UA-cam.
Lars, for an old guy who watches the youngsters zip around Fusion with envy, I have to say you teach very, VERY well. I was not very hopeful at the beginning but I practiced making the Absolute Beginner tutorial box several times until I knew what I was doing... and I was hooked.
So thank you Lars, and also to Autodesk for making it free for enthusiast use. Seems an old dog (me) can actually learn new tricks. Next hard point is actually to transfer a 3D model and make it on my cnc OX router ( that is coming next week). I'm doing this actually as therapy for long term chronic pain.
You are so very welcome :-) Thank you for watching!
Lars, I always recommend your videos to my friends who are afraid to start learning something as powerful and complex as Fusion 360. Your easy going demeanor and paced explanations really help it sink in as we follow along in real time with our models. Please keep up the great work!
I've retired from a SW background. A couple years ago I started using F360. I've been fighting joints since then. Your video finally sheds light in to what is going on in F360. Thank you!
Clear, concise, good voice tone and easy to listen to. I will look for your tutorials on Fusion, Tanks a lot.
Thanks to Lars, in 3 days I've gone from a primitive noob to:
- Day 1: Firm grasp of sketching & solids
- Day 2: Firm grasp of drawing
- Day 3: Firm grasp of assembly
Friggin thanks man. You're the best.
It's 2022 and still one of the best tutor on UA-cam! This a quite explanatory and simple. Thanks for such huge work.
the best tutorials around for fusion you make it enjoyable to learn, thanks!
Very helpful Lars, the way you reiterate each step really sinks in and it doesn't seem repetitive. It is indeed hard coming from other CAD programs to think "backwards" and go for the final position instead of trying to reduce degrees of freedom one at a time. Thank you!
my favorite tutor for fusion by far. thanks for all the help.
Amazing work done sir!
Just watched the video to clear a doubt or two, got to learned a whole lotta new stuff too! Thank a lot.
Lars, Great explanation of how to assemble parts in Fusion 360. As a Pro/ENGINEER/SolidWorks user for over 20 years, I was so confused when I tried using F360. This was very helpful, thank you!
Love the video, your videos have been super helpful! I have no CAD background but love exploring Fusion 360 and your videos have helped me take me skills to the next level!
Thank you for making these videos! I watched the beginner series, with no CAD experience at all. I feel like I have a MUCH better understanding. Keep up the great work!
Awesome to hear. Thank you for watching 👍😊
Wow Lars so kind of you to share the files so we can follow along side you. Thanks for the video
Thank you, sir, it's an excellent tutorial, clear voice, clear words, and teaching the stuff at an excellent pace.
Thank you for the video, your channel has been extremely helpful for my Fusion 360 journey.
So helpful! Great instructor! Thanks Lars!!
Thank you lars ! You are my CADhero
Thank you so much for this video. For me as someone not very familiar with Fusion, it was incredibly helpful. Thanks!
Lars, Bless you for these videos, absolute life savers! Thank you!
Great work, Lars. It is giving me the tuition I could not otherwise afford. Thanks so much!
Thank you for taking the time to watch and comment!
Have an awesome day!
Super informative, no stress applying these tutorials!
Thank you! I really like the way you present everything and repeat the infos. I learned so much from this video and will watch your other videos for sure!
Absolutely Awesome Lars!
Another very clear and easy to follow tutorial!
Thank you for sharing your knowledge. Your videos are really helping me to get started with Fusion.
Why am I always thinking of questions while watching your videos and then you go and show the answer like 10 seconds later! Great videos 👍
can't say how much this helped:) Thank you!
With tutorials like this it's really fun to learn new sofware.
Great tutorials Lars. Exactly what I need for learning Fusion 360.
Your videos are absolutely amazing, there very clear and have all the information without making any assumptions about what I know. By far the best tutorial I have found for any software.
You sure make it look easy....good stuff!
Fantastic, we'll done Lars, really helpful.
I have never done CAD work before in my life, With around an hour and a half of video between you and NYCNC Im happy with my progress, excellent videos, very clear and easy to understand
That is awesome to hear Matt Brown .Thank you for watching the videos.
John creates the best videos!!
I've been programming Mastercam for past 25 years as all-axis programmer, but now i work for a company that they use Fusion 360°. Lars knowledge and his great attitude teaching online is the best i ever seen.
Great software so far and I'm excited learning from Lars for sure. Thanks Lars!!!
Wow! Excellent tutorial Lars 👍 thanks
This is awesome Lars. I really appreciate the helpful tips. I was getting sooo lost trying to manipulate my models. My supervisor will be impressed too.
Thanks Lars. Great job. Very understandable and logical.
Great work, really appreciate it! I also watched your 3 part series on modeling :)
Extremely helpful. Thanks a lot, Lars.
Keep them coming Lars. Learning Fusion will be a big help.
That is awesome to hear MrMegaherb .Thank you for watching the videos
Only 12 minutes into the video... Already feel it deserves a huge THANK YOU, like a weight is lifted off my shoulders. I too come from many many years of rigid CAD background and tried several times to use Fusion360 at home. Every time I gave up. In addition to your tutorial, your comments on how we need to think differently and how this program uses a different methodology for assembling are incredibly helpful.
That is awesome to hear Francis Noonan .Thank you for watching the videos
Lars, your instructional videos are not only extremely helpful, but also the most enjoyable to watch. I only recently stumbled upon Fusion 360 and I have completely overdosed on fusion tutorials in the past 2 weeks. My subscriptions for SolidWorks and CamWorks are due end of November, and thanks to you and Fusion 360 I think I am going to bail on them after about 12-14 years of loyalty!! Thank you,
Hi Greg, Thank you for taking the time to comment! Glad you find the videos helpful!!
Have an awesome day!!
Best,
Lars
Hi Lars,
Your videos have keep using Fusion 360, thank you. Your intelligent, straight forward, energetic and often humorous lessons are excellent. BTW, I hope they pay you in some way and/or give you high praise, you certainly earn them. Thanks again!!! :-)
Thanks Lars for getting this done!!!
Your videos have helped me decide to setup my new company around Fusion 360... Thank you for your knowledge and quality videos.
Lars, you are my hero
Very clear explanations, thank you!
This is extremely helpful. Thank you very much, Lars.
Thank You. Cleared up a lot of confusion for me.
Great video, learned a lot, thank you.
Very informative tutorial and I like the way and the rythm you make everthing clear.
Hi Larsen.
I would like to thank you for your presentations in all the tutorials I have watched, they are clear and detailed for me to understand and the pace is slow enough for an old over the hill person like me (I am 85 years young in March), this is so refreshing in these days of speed, I only wish your approach would rub off on other presenters out there. Another important note is the quality of the video especially the sound track which is superb,
thanks again Larsen,
Geoff Wheeler.
That is awesome to hear Geoff Wheeler .Thank you for watching the videos
Excellent video! Thank you!
Hi Lars, Awesome Explanation!
Thank you for posting this!
You are the best Lars! Really helped me to ramp up my abilities with F360.
Awesome!! 👍😊
Very clear instruction with summary reviews. I have not yet found Lars' menu of all his videos.
It's official you are Best teacher of FUSION 360 my man Lars Christensen !!
Thanks
That is awesome to hear Castelo Woshu .Thank you for watching the videos
Excellent explanation, thank you sir.
Very well done Lars.
Lars, hello! My name is João Carvalho. I am Portuguese In fact, I am starting with this program - Fusion 360. The program I used and still use is Inventor (in my case, the last version I installed the version / release 2020). So, I would like to thank you for this wonderful video. You were amazing with all your lessons / explanations / examples ...! Today I learned a lot from you, honestly. Congratulations on your performance. You are a true teacher in this matter, indeed. I really want to thank you for giving me this amazing lesson with Fusion 360. God bless you. My best regards from Portugal: João Carvalho.
Thanks, Lars! This was very helpful
Lars great work mate enjoyed it
Really well explained, a big help
Great video Lars! I am a total novice, but your explanations are very clear and easy to understand! Thanks
I was breaking my head on how to make the turning joint, u hinted me to the right direction, thank you :)
Designing a hovercraft lift propeller :)
Thank you Lars. Your videos have been so helpful for me learning fusion, you're a brilliant teacher.
Thank you so much! Happy to hear the content is helpful 👍😊
Amazing tutorial... Thanks sir 👍 you go the depth of the concepts that any beginner wanna know
Thank you for this tutorial!
Thanks so much for the videos. You put so much effort and explain everything so well. You are much appreciated.
exactly what I was looking for. Thank you for the good explanation.
Very helpfull explanation Lars.
I love you. Thank you for actually explaining this program for us unlucky ones who don't have access to solidworks
Lars, you really are a great teacher is evident your experience, but most of all the passion that you put in your work,
I really appreciate, the patient and the generosity of share all your knowledge and your time, you really are one of the kind
I relatively new in fusion and inventor, and I became your follower,
Thank you very much
Thank you for the kind words, and for watching!
Great video and explanation as a total beginner this is amazing stuff...and mind boggling. 😊
I wish every creation software had tutorials as good as yours Lars. I really appreciate how slow you go and how you repeat every command you use multiple times and speak them out even when you are doing them for the 2nd or the 50th time and talk about the intention of each. It is extremely helpful.
That is awesome to hear Blaine Brezina .Thank you for watching the videos
Awesome as always Lars!
Thanks for a great video. As someone that's been using 3D CAD for almost 20 years now, it's certainly hard to break the habits that have been developed in various software. Hearing your description of how typical mates are applied in say, SolidWorks (which I use daily), versus how they're applied in Fusion really helped me to wrap my brain around how to approach joints in Fusion. I was really struggling yesterday with an assembly and this video has given me a fresh perspective. Keep up the good work!
Thank you, Chris. Really appreciate your comment. I understand your pain, being a past SolidWorks user myself. It takes awhile to get use to new ways of doing things :-) Hang in there.
Have an awesome day!
Best,
Lars
I had no idea about rigid grouping.
I always went back and moved everything back to what I moved
This changes everything! 🙏 Thank you!
You are so very welcome 👍😊
Mr. Christensen
, Thank you for your videos! Very detailed information. Sequence of operations is great. Summary at the end, very GOOD!! You put into the videos little tidbits that others don't, this includes AutoDesk. Please keep up the good work with these types of videos. I am making a telescope utilizing Fusion 360 and 3-D printing - all parts including course and fine focusing adjuster. I have about 30 hours working with Fusion 360. I have not had any formal training with any CAD systems. I am teaching myself. I should say, you are teaching me! LOL
Thank you for watching! Happy you find the content useful👍😊
Very helpful! Thanks Lars!
Absolutely one of your best videos and possibly the most informative video on Fusion I've seen.
Thank you!
This is extremely good. This is going to make my job so much easier designing what I need to make. I wished I watched this a few days ago
This is very very helpful. Thank you!
Great Video. Thanks Lars!!
Hi Lars, I'm brand new to Fusion 360, having used cambam in the past with my home build CNC machine. It's time to start making more complex items. I really enjoy your video's, they are great, well explained in a good speed, very understandible. Thanks!! More videos to watch.
Thank you so much for taking the time to watch the videos and comment. Really happy that you find them helpful! I'll keep making them :-)
Have a great day!
Great presentation Lars. You are an excellent instructor.
Thank you so much John Krebs
Awesome thank you
Jason
Thanks Lars! Coming from years of SolidWorks, this video really helped me to understand Joints.
That is awesome to hear Chas. Colburn .Thank you for watching the videos
Lars you have made great job. I was waching it with plesure. Well done !
Lars, this video cleared up a lot of confusion for me. Thank you!
That was the ticket to my next ride. Thanks for the post, it gave me great insight.
Instruction is good! The Joints here are not nearly as intuitive as mates in Solidworks but looks faster once you know how to use it. I'm here learning Fusion since I was trained in solidworks but can't use it in my small business since it's 5-7K a seat. Fusion is accessible, thanks!