Thank you so much for making this video! The Nissan dealership was going to charge me $2800 to replace the ECM & Immobilizer. I bought both of them on eBay for $127. Thanks to your video, now I can replace it myself.
Thank you very much for this video they told me my ECU and PCM which I guess is a related board for my 2009 Xterra they wanted to charge me $1,800 to replace those two alone and it might be even more. I knew that they were telling you the truth on the parts but they made it sound like it was too technical. I understand computers so I knew they were trying to snowball me.
Just a little advice for everyone, Before changing any car parts I would highly recommend wiping everything down clean , with a Rag & Brush because you can cause contamination inside the part that you are swapping out 🤷🏽♀️💯
Thank you so much! I only needed to replace a section of chewed wires, but needed to know how to get the plug out. I know every other place would just replace the whole harness.
Hey hope your still on here. I was wondering so basically your saying. With the PCM your able to replace it your self ? Then just get a mechanic to do it ? Because Nissan want 700+ for that part 😢
My car has intermittent start issues as well as cylinder 2 randomly not producing spark ( i think it actually shorted out a coil pack in that cylnder. Is there a way to test that the ecu is causing that?
You mentioned something about this old one could maybe be re-progammed. So, why not just re-program it rather than replace it? Can the dealer re-program it for you and then you install it?
Never go to a dealer, find online or ebay that you can give your vin# and they will reprogram or program the one that you are going to purchase with your car info.
@@skywalkinjaylin716 order a used one on EBay but make sure the Vin Number on your old ECM matches the Used ECM on EBay 👍🏽 Then call a LockSmith to Program the Skim for you
H Question pls. I have 2002 sentra 2.5 ser automatic with security system. My ecu is bad , so I need to replace It. How do u go about getting another one. U do see them on ebay but I'm not shure what numbers to look for. There are some number on the top and big K4 in the middle and other number at the bottom. Any help will be so helpful please
I have a 2008 Nissan Titan. Long story short I hired a mobile mechanic and he broke the locking clips that attach to the ecm but I can’t find them online what are they called? Thank you
What repairs can fix the P0605 code? 1. Repairing a faulty ground or power supply such as corroded components and damaged wiring. 2. An Engine Control Module update, reprogramming or reflash (if applicable) 3. Replacing the ECM.
@@macdaddypimpping i did number 1, no fault on a wire or power supply. Now i guess number 2 is there before changing the whole module. Any help regarding reprogramming? Or is there any video related to this? I have nissan versa 2011
The ECU is located on the floor directly behind the radio. You do NOT need to remove any glove box, dash, or vents to access it. There is a black plastic cover with 2 round plastic snaps that cover the ECU. From the driver's side, the cover is directly beside the gas pedal.
hello, what if I want to change the ECM with one from the same make model year etc but WITH cruise control, in order to add cruise to my car (prewired for it)? Should it work? thanks
There are some sellers on eBay selling already programmed to your VIN# but cost more that are ready for plug & install and needs to re-programmed the key or your car will not start.
I have a 2009 Nissan Altima hybrid anyone know where to locate the Powertrain control module is it in the engine bay or inside the car behind the dash.
Hello i have 2018 Nissan Sentra i would like to change the ecu , do i have to get exactly same one or anyone from eBay should work or i have to program the computer, thx
You have to get the same one from eBay eg. HN5/J8 or look for the same number that's on your ECU, some seller that sells ECU that will program thru your VIN# and are plug and play and some required re-programming. Be sure to unplug all the power before you swap the ECU and search how to relearn online. Good luck.
Over Mendoza,I think your email or whatever name it goes by has to be what is called reflashing.Usually someone that does this has to come and do that.
Must consult with mechanic or dealer before installing a new ECU or you might burn it and must disconnected main battery when removing or installing the unit to avoid from shortage.
Thank you so much for making this video! The Nissan dealership was going to charge me $2800 to replace the ECM & Immobilizer. I bought both of them on eBay for $127. Thanks to your video, now I can replace it myself.
Glad it helped!
Hello guys I have question if I replaced my for used one do I still take to the dealership and programed or not
@@rubenit8440 Yes you have to or else your car will be confused and will not run properly and there will also be codes that don’t belong there
2022, they wanted to charge $2900 but I did it myself. Thanks to UA-camers like him.
@@Tya2019 Did you get it reprogrammed? How much?
No supe nada de lo que explicó porque no se nada de Inglés pero vi lo que quería, muchas gracias y se que fue una explicación bien profesional
omg y no dice si reprogramo la ecu o no
Thank you very much for this video they told me my ECU and PCM which I guess is a related board for my 2009 Xterra they wanted to charge me $1,800 to replace those two alone and it might be even more. I knew that they were telling you the truth on the parts but they made it sound like it was too technical. I understand computers so I knew they were trying to snowball me.
Does the number on ecu have to be the same or they could just program any ecu
Great informative explanation without all the nonsense I see on other videos. Thank you!
Just a little advice for everyone, Before changing any car parts I would highly recommend wiping everything down clean , with a Rag & Brush because you can cause contamination inside the part that you are swapping out 🤷🏽♀️💯
Good tip!
Thanks a lot 🙏 💓
Tub'O'Towels from Home Depot or Amazon is great for removing grease and grime from parts and is a great hand cleaner as well.
Thank you. . im doing it today on my 07😊
Thank you very much from Lisboa.
You are welcome!
Which driving side is your vehicle, I need to replace the ecu and the engine wire loom and my van is driven with steering on the righ side, thank you
Left side.
Thanks great video I’m going to fix my 2007 Altima tomorrow 🙏🥇
Good luck!
Thank you for the video. How do we program it??
Dealer or 3rd party specialist that knows what they are doing, eBay also have seller that can program from your VIN#.
Thank you so much! I only needed to replace a section of chewed wires, but needed to know how to get the plug out. I know every other place would just replace the whole harness.
Glad it helped!
Have a 07 s model. Replaced ecu with one from the junkyard and still won't start but the P0605 code is gone. Will reprogramming it fix the issue?
Yes, it would because the keyfob didn't match with your original VIN#.
thanks for a very clear explanation. Much appreciated!
You are welcome!
Thanks a lot. Very well explained.
Most welcome!
Hey hope your still on here. I was wondering so basically your saying. With the PCM your able to replace it your self ? Then just get a mechanic to do it ? Because Nissan want 700+ for that part 😢
Try eBay for PCM service or reprogram or locally, good luck.
@@macdaddypimpping thanks 🙏🏼
Yeah man thanks for all you do!!!
My pleasure!!
Was it a plug and play ecm?
Excelente video maestro saludos cordiales 👍🏼
Does the numbers on the old ECU have to match the new ECU?
Number must match
Thank you Sir. Excellent video and instruction.
You are very welcome
Pls how much will it cost to get a ECM (Brain box)
I got mine from eBay, back then was like $120.
For a 2014 Nissan Versa they run ~$400 preprogrammed. For other make/models I’ve seen em both higher and lower.
Thank you no where could I find info about finding pulling and replacing ECM. Thank you!
Does it need programming after changing?
Would be nice to know what year this car is.
My car has intermittent start issues as well as cylinder 2 randomly not producing spark ( i think it actually shorted out a coil pack in that cylnder. Is there a way to test that the ecu is causing that?
Can you tell me Where is the ECM located on a 2006 Nissan Frontier 2.5L 4cylinder
ECM, should located behind the cigarette lighter adapter or below the radio console.
You mentioned something about this old one could maybe be re-progammed. So, why not just re-program it rather than replace it? Can the dealer re-program it for you and then you install it?
Never go to a dealer, find online or ebay that you can give your vin# and they will reprogram or program the one that you are going to purchase with your car info.
@@macdaddypimpping mines just went bad and they want me to pay over $1500 so my best bet is go online but idk where to start
@@skywalkinjaylin716 order a used one on EBay but make sure the Vin Number on your old ECM matches the Used ECM on EBay 👍🏽 Then call a LockSmith to Program the Skim for you
So i like to know how much it will cost reprogramed a car if i change the ecu
H
Question pls. I have 2002 sentra 2.5 ser automatic with security system. My ecu is bad , so I need to replace
It. How do u go about getting another one. U do see them on ebay but I'm not shure what numbers to look for. There are some number on the top and big K4 in the middle and other number at the bottom. Any help will be so helpful please
The number on the white sticker must match with your old one or else it's not compatible.
@@macdaddypimpping do you mean just the "N5" on your computer or also the smaller numbers too
What do you mean you have to relearn?I bought a used one on ebay will it work?
Did you reprogrammed yours?
After you change your ECU there are steps that you will need to relearn or reprogram by a dealer depends on your transmission type.
Hi, my car is Nissan patrol Y62 2014, can you tell me what’s the wire gauge of ECU!
I have a 2008 Nissan Titan. Long story short I hired a mobile mechanic and he broke the locking clips that attach to the ecm but I can’t find them online what are they called? Thank you
See if you can find it from junk yard, I don't think you can find those clips by itself.
Great help. Thank you
Glad it helped
I have a ecm programmed according to my VIN number, will this work for a 2008 nissan rogue?
It should be similar for all Nissan.
Thank you very much 😊 ☺️ 🙏
Most welcome 😊
I have p0605 code showing. Do i need to replace new ECU/ECM for this?
What repairs can fix the P0605 code?
1. Repairing a faulty ground or power supply such as corroded components and damaged wiring.
2. An Engine Control Module update, reprogramming or reflash (if applicable)
3. Replacing the ECM.
@@macdaddypimpping i did number 1, no fault on a wire or power supply. Now i guess number 2 is there before changing the whole module. Any help regarding reprogramming? Or is there any video related to this? I have nissan versa 2011
Now I can do my Mother's car, thanks 😎
Have fun, make sure you get the ECU programmed or buy the one that's already programmed for plug and ready and need to relearn your key.
I need the brain box 2008
Thanks man!
You bet!
Great video
Where can I find or purchase the gray clips remove from ECU
Not available, I might take my old one and list on eBay.
Dealership
Thanks bro
Any time
Will this work for my 2013 Nissan Rogue, please advice.
Thank you.
Depends where you buy the ECU from, new ECU must programmed to your VIN# or check with your local dealer first.
@@macdaddypimpping I'm ordering ECU based on my VIN # just waiting on quote now. I just hope it works.
Thank you.
what do you mean when it said must relearn?
which seller did u use on ebay
Where is the Electronic Control module located on a 2007 Nissan maxima ? T.I.A.❤️❤️❤️
The ECU is located on the floor directly behind the radio. You do NOT need to remove any glove box, dash, or vents to access it. There is a black plastic cover with 2 round plastic snaps that cover the ECU. From the driver's side, the cover is directly beside the gas pedal.
@@macdaddypimpping thank you 💕
Thank you so much.
Great
Nice job
I have a 2010 Nissan Altima 2.5 that want acceleration could that be problem
Hey can i have an 2011 Nissan Altima can i use an ecm from an 2008 Nissan Altima ?
No
Thanks
Welcome
Hi I replaced used ecm on 2014 qx80 what the steps i should do to program please
You must consult with a mechanic that can program or a dealership, if not you might burn your new ECM.
How do you relearn the ECM ?
hello, what if I want to change the ECM with one from the same make model year etc but WITH cruise control, in order to add cruise to my car (prewired for it)? Should it work? thanks
There are some sellers on eBay selling already programmed to your VIN# but cost more that are ready for plug & install and needs to re-programmed the key or your car will not start.
thanks! could you share a link about these sellers? :) thanks
Thank you
You're welcome
Good day, can u help me get computer box 2005 for Nissan Titan
Please check on eBay
that computer has to do with the transmission not taking the changes I have a 2009 Nissan cube 1.8 engine
Hello, anyone know where I can get my nissan qashqai 2018 ecu repaired. It has adblue error
Check on eBay or your local repair shops and ask around, good luck.
Is it the same way on Infiniti
Thank you, this helped me.
You are very welcome.
Can you please help me find the right brain for my 2013 ad wagon Nissan my power keeps dropping 🤷🏻
How do you do the relearn part
If I get a used one for my car, does it need reprogrammed?
But how do you program it?
Dealer or someone who knows how to reprogram an ECU.
@@macdaddypimpping this the iss I gotta my transmission replaced 4 times do you think it's the ecu?
If I get an ecu from the exact car as mine do I need to relearn or reprogram
Depends where you get the ECU from and model of your car.
How do you relearn it?
Odometer?
I have a 2009 Nissan Altima hybrid anyone know where to locate the Powertrain control module is it in the engine bay or inside the car behind the dash.
how do you reprogram the ecu
Where are you from
USA
Hello i have 2018 Nissan Sentra i would like to change the ecu , do i have to get exactly same one or anyone from eBay should work or i have to program the computer, thx
You have to get the same one from eBay eg. HN5/J8 or look for the same number that's on your ECU, some seller that sells ECU that will program thru your VIN# and are plug and play and some required re-programming. Be sure to unplug all the power before you swap the ECU and search how to relearn online. Good luck.
@@macdaddypimpping relearning and reprogramming is different? If you buy a plug and play do you need to relearn?
Over Mendoza,I think your email or whatever name it goes by has to be what is called reflashing.Usually someone that does this has to come and do that.
why didnt he reset the old ecu ?
I thought it’s located under glove box inside ??
Which model do you own?
@@macdaddypimpping oops sorry 2010 altima
My 2012 Versa Needs a IPDM module do you know where i can find it My AC doesnt work
Tye here: www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=IPDM+module+2012+versa&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=IPDM+module
@@macdaddypimpping You saved me 1k, since it came off the same model it shouldn't need reprogamming.
Cool, good luck.
@@macdaddypimpping Installed it AC still not working.
@@mw4382 First of all, did you have a diagnostic code? What causes your AC not working? Did you disconnect your battery that causes this problem?
God bless heal and save you
Need smart key reprogramming?
If you purchased from a seller that can program your VIN that's Plug N' Play then no.
i just change mine used do i have to relearned? 2014 nissan altima computer.
Yes, relearned or needed reprogram. Please contact your local mechanics or dealers to ensure.
@@macdaddypimpping thak you very much
Anytime, good luck with your fix.
Must consult with mechanic or dealer before installing a new ECU or you might burn it and must disconnected main battery when removing or installing the unit to avoid from shortage.
Maybe you should tell us.. did you have to?
What is the car model number
Anyone can give me any informascion where I can get a nissan 2017 qashqai EMC , used.
Junkyard
Please never use finger ringer & wristwatch when you work with battery.
Please
You are incredible thanks for the video my gentleman
Thanks for watching!