Replacing AR-15 ejection port dust cover - EASY!!!
Вставка
- Опубліковано 29 лип 2012
- Be sure to stick around for the outtakes at the end!
amzn.to/2SCOuQa
This seemed like it was going to be impossible, but after I came up with a technique it was actually quite simple! Watch the end and you'll see why I was so excited when I got it to work in the first part of the video (which was after I'd failed a ton of times). :-)
I am a 71 yr old female with advanced arthritis in my right hand. I want to thank you for this youtube video. It gave me a good sight picture of what needed to be done with great verbal instruction. Replaced my dust cover this morning even with my physical issues. sv
+Sue Voorheis Glad to help Sue! I'm just glad/amazed that a 71yo female would either have an AR or be interested in changing the dust cover. :-)
+SnareMan New to shooting as of last fall and love it. Purchased a Glock 19 and the AR-15. I have added a red dot to my (our) AR and still learning much. Only wish I had discovered this hidden love many years ago. Thank you again for your video. PS Dust cover from my instructor ... I believe one he used in the military.
@@suevoorheis1096 good job sue... Glock 19is great be careful no safety
Sue, I have the utmost respect for you!! Love that you enjoy shooting! Big hugs and keep enjoying life and the thrill that shooting an AR (or guns in general) does for you!!
Sue I'm impressed and very happy to read your comment. Hope you're still out there shooting!
Literally tried for 20 minutes until I found your video and the “pull down and out”. 2 seconds later... it’s off!!! Thank you!!!
Glad it helped!!
Followed your tips and had the dust cover changed out in about 5 min., no problems at all! Thanks dude for a great informative video.
Years later and your video is still helping people. Thank you! With this video I had the confidence to tackle it myself. I did as instructed and was questioning the tape and boy am I glad I listened. That rod is JAMMED in there TIGHT. The replacement dust cover i had purchased came with a new rod but that rod didn't have the retention clip. This video gave me the confidence to use the OEM rod and retention clip as SURELY its better than not having one with the new rod. ANYWAYS, thanks a ton! This video seemed to stretch on forever but once I was IN your shoes I'm glad it did. The process was super easy and clear to follow. Cheer brother :)
I'm glad it helped! 🙂
Nice! I have done this before, but it's been a while. With all the various calibers running around for the AR platform, I decided to mark all of my uppers with caliber specific dust covers. After receiving a number of dust covers in the mail, I checked out your video to refresh my memory on how to knock these out. About 20 minutes later, they were all done, thanks to your helpful video.
glad it helped!
Take a small flat screwdriver. Rotate the E clip so the open side faces the receiver. Put the tip of your screwdriver under one of the "slots" in the E clip and then rotate the screwdriver. That will pop the clip right off without any pulling or damage to the finish. You can put a rag over it before you pop it off so it doesn't fly across the room. Easy. Pushing on the clip is a sure fire way to scratch the finish when your tools slip off.
Great tutorial man it helped a lot, thanks brotha
This is definately the best video on changing out the dust cover I've seen and because of this, you've convinced me to do it for my daughters rifle. Thanks. You are the only one that really discusses and shows how to deal with putting the spring back on. Great video.
The spring was a bit of a pain, this is definitely the best video I've come across on UA-cam. The bar itself was challenging to clear the lower part of the forward assist, it took me about 20 minutes to do the whole job.
I have had one of these sitting in my work bench for months dressing installing it. Watched your video and done deal within 5 minutes. Thank You!
With all the videos and ways I’ve tried to get that seed from hell off, this is the only one that worked, 1st try! Thank you 🙏!
Glad it helped!!
Yes I grew up with my dad refusing to pay anybody to do something he could figure out. Of course I was right there holding the flashlight and tools.
Always funny when you finally figure out the easy way. We broke a lot of things finding out the secret "tab" or hidden screw.
Cheers!
Great video-Thank you for your help! this took me less than 5 mins. it took more work to get the stock one off than putting the Magpul one on 😆
Glad it helped!
Your engraved dust cover door is 100% better than the 💩 I just received
Great instructional video. Helped me get it done in 10 minutes. As a previous poster stated, the hardest part was nothing the little C clip and spring.
Well done sir.
+jr10 Glad it was helpful!
Thanks a lot. I can finally replace that cover I bought over a year ago. You're the man!!!
No problem! Glad it was helpful!
"Surely there is someone I can pay to do this!" Haha I was thinking the same thing while watching other videos on how to change the cover.
I thought everyone should see the misery I experienced for all of you. :-)
Thanks so much for making this video! I replaced mine in under 15 minutes...never have done it before. I think the toughest part was getting that little bugger of a clip back on without losing it! Thanks again!
+UncleLoodis You're welcome! Glad you found it helpful!
Excellent advice! I'm about to undertake this very upgrade and I'm sure that you'll be saving me some heartburn!
Perfect. Ageless video for this modification. Much appreciated!
Well done. Nice to see someone brave enough to show their failures. Enjoyed your honesty. Keep up the good work!!
They were so humorously frustrating I had to include them. :-)
You sound like someone I'd regularly hang out with on any given day doing any old activity. You sir, sound like a friend I've had for years that I sadly rarely see anymore.
Am I?
@@SnareMan in a sense yes, as we are all 1in the same, just shattered into countless fragments experiencing itself but never knowing how to fully reassemble itself. And in a less like existential viewpoint I mean maybe we are maybe we have been at some point in this life and just maybe maybe you are. If you ever hung out with some weird funny white dude in the Southwest desert of the United States it could be me.
Thanks to your well done video, I followed your procedure and was able to replace my dust cover with no problem whatsoever. Thanks for posting it.
Allen Lucas I'm glad it helped! Thanks for watching!
Super easy. Fantastic video! I used this to change my 1st one over a year ago. Just used it again as a refresher.
+sribble1 Glad its still helpful! :-)
Broke like 3 pairs of tweezers while doing this but finally got it on! thanks man!
"Peace through strength"
Cicero in his grave making the big Bugs Bunny face: "N O"
Man, thank you for your patience and very easy to follow video. I followed step by step and had perfect success. Thank you!!!
No problem. Glad it helped!!
Have a new dust cover and wanted to watch a video on how to replace. Your process was the best and easiest overall. The C clamp only flew on the floor once. Good job on explaining the small details it does help when you have never done this before.
Never find a more helpful video thank you I would have never figured this out on my own
Glad it helped!
That little C clip was a booger though.
I almost lost it twice!
Thanks again. All good tips.
Booger is a nice way to put it.
I'll just come right out and say it....."it was a son of a bitch"!
Thanks so much for this awesome video! I just did one dust cover and have to do another. I actually ordered a dust cover kit in case I lost the C clamp but with your help I didn't need to use it.
Followed your instructions to remove and replace dust cover,awesome. No problems whatsoever. Thanks.
I'm glad it went smoothly for you! :-)
Great and easy video to follow. Just watched and applied it. For a grunt, you brought it down to my level. Thanks for the technique.
+Brad Greenwald LOL. Glad it helped!!
Yooooooooooooooo this made my life so much better. I lost the c clamp from watching another vid. Had to wait to get more, and then I found this vid and BOOM💥! Perfect!
Glad it helped!
Great vid, you made this super fast and easy clear to follow, had 0 issues and took just minutes
Glad it helped!
Thanks a bunch for making this how-to!😊 I would have been afraid to tackle the job without your video.
Thanks for your expertise into this video. I have a PSA AR-15 in 300 blackout. It was very difficult and time consuming process. PSA must push their dust cover pin on a press machine, because it was very close to the medal forearm. I couldn't even get a exacto blade in between to push the pin out a little bit. I had to use a brass punch rod with a hammer to get it to move. It was a pain in the wazzoo!!! Thank you So much for this very instructional video.
SAVED ME ON THIS ONE BROTHER!! That spring had me so confused. The "C" clamp for me was as easy as 1, 2, 3
Modivation Design Glad it helped! :-)
Great instructional video. I just picked up a used Bushmaster upper missing the dust cover and thought the handguard ring needed to be removed, which meant the entire gun was going to have to be disassembled. Thank gawd I found your video.
Glad it helped!
I actually found it was easier to point the opening of the C-clamp toward the upper and pry up on it. It went flying but I was in a controlled environment and recovered it right away. Awesome video man. That was easy!
Glad you got it done easily!
First time changing a dust cover and was able to do this in about 10 minutes with the help of this video. Excellent stuff. Only thing that's missing is putting the c clamp back on, ended up being the hardest part. I suggest using tweezers and pushing it into the groove until it's sort of stuck on there. Then take a small flat head and push down hard on the top of the clamp. Should click in.
Thanks for the added. Tip. Glad it went well for you.
This is the most helpful video I've seen on how to replace the dust cover. Thank you!
glad it helped!!
I knew this was going to be a beast. After about 30min of failing i remembered that i bough my wife a micro screwdriver set. Used the very small flat head and another that just came to a point. Three tries and that little C clamp flew off to never be seen again, haha. Forgot someone suggested putting ointment on it so it wouldn't fly away. I bought a UDC ultimate dust cover so I don't have to worry about this again. Thanks for the video. It really helped. Happy 10th year Anniversary!
Thanks! Yeah, it's been a surprisingly popular video. Good idea on the ointment part
Great instruction buddy! Done in 10 minutes with your help. Thank you!
Glad it helped!
Great vid and especially liked the bloopers at the end lol. Wanted to know what i was up against before i changed my dust cover and now i know. Thanks
Thanks! I figured everyone should see the 'fun' I went through with it. :-)
Took me all of 7 min to do it. I watched your intro and was done by the out takes. Great video. For the tape use masking tape and fold it in half to fit. Its thick enough to slide behinf the guide rod and stay in place. Also it will catch the c clamp. I used a small flat head screw driver and a paint can opener to femove the clamp. Came off easy. Then used a pair of pliers with masking tape on the tongs to pull the guide rod. No scatches. And my AR15 "DANIELLE" now has her famous catch phrase "CASH ME OUSSIDE ....HOWBOW DAH!"
Great tips. Thanks!
Thanks for doing the trial & error for me. After seeing it done once, I swapped my cover and think that was the easiest change I've ever made on my AR.
You're welcome!!
2024, this video came out as 1st displayed. I'm fighting getting the c clip back on my 2nd install, lol. 1st one went easily. # 2 is being a bee - yotch. Nothing like taking a break and watching how easy you get it done... now to find tweezers. Thanks 👍👍
Glad it's still helping after all these years
I've never tried to replace my dust cover before. It didn't seem very complicated when I watched your video and it took me a whole 2 minutes maybe to complete the swap. I'm guessing from the comments that it has been a problem for alot of people so thanks for the great video. First try = perfect success..
Yes indeed. Did you watch the outtakes at the end of the video? You'll see my pain...
Thanks alot!.i watched this video before my cover came in the mail so i was ready when i got it. it took me less than ten minutes using your trick ,thanks for sweating it out to show us tubers a better way!
Nice work. Appreciate you taking the time to help with this.
Thanks and you're welcome! :-)
Good work on the video. This is the only tutorial I watched for swapping the ejection port cover and it was a snap. Had two of them changed out in 20 minutes or less. Thanks.
Great video! Used this to put on my new engraved dust cover with no problems thanks to you!
Glad you liked it!
Thanks for the video. Got my new dust cover installed in no time.
Dana MacLeod You're welcome! Glad it helped!
Much easier than the way I usually do it lol. Now I can order my custom dust cover that I've been putting off for the last year lol thanks bro.
No problem!
Although old, still very helpful. Thank you sir for providing this info as I am working on a 300 Blackout build and wanted to know the process of adding a custom cover. Thank you once again...
Glad it helped!!!
You're welcome! Glad you found it helpful and it made it easier for you!
That technique to remove the e-clip worked perfectly!
Excellent tip!
"C" clip. aka: "Jesus Christ Clips"
Thanks man! Your technique is definitely the way to go!
You're welcome! Thanks for watching
Well done. This will come in handy next week for my 300 Blackout dust cover swap.
Thanks. Good luck with it!
Easy like Sunday morning!! Thank you very much:)
I followed along step by step, easy with clear instructions, great video 👏🏻 very helpful 🙏
Thanks Bob! I hope I win the showcase at the end of the show.
Ur awesome man this definitely helped me get it done!
Thanks!
*EXCELLENT TUTORIAL! THE TAPE IDEA IS A GREAT SUGGESTION...THANK YOU!*
You're welcome! Thanks for watching
Well, that was after far too many failed attempts (as I showed at the end) so I was quite excited to finally get it. :-)
Glad it worked well for you. Thanks! Good luck with those clips!
Thanks for the video, clearly showed up close of how to keep the port cover from being flimsy by rotating the spring to keep it in place.
You're welcome!!
great method, successful on my first attempt, took less than 3 minutes start to finish, with no marred finish thanks to the electrical tape...much appreciated! :)
I'm glad it worked out so well.
My brother, thank you very much for the tips! Your video helped me a lot!
You're welcome! :-)
Glad you got it to work!
Looked at a few videos for this. This was by far the easiest!!!!! Replaced two covers in the amount of time most videos spent looking for their needle nose pliers. Had some small flat end tweezers that fit over the pin and just pushed the c clip right off. Thanks for the video !!
Great job!! I followed your example and it worked out perfectly!! Thanks!
+kuahiwi82 You're welcome! Glad it worked out
Great video. After watching I was able to change my dust cover in about 15 minutes!
Glad it helped!
Thanks for the video I need to add mine this weekend perfect timing on your video... You made it look very easy....
Great info!! Used your technique and had my old cover off and the new dust cover on in less than 5 minutes. Wow, I agree that could have been a real nightmare if I had tried it without seeing your video. Thanks a bunch!
You're welcome!
You’re the man. I can’t get that little guy on and I must have lost it 47 times 😅😅😅😅
Glad it helped!
Great tip! Thanks for making it so easy!!
You're welcome! Thanks for watching?
Thanks for posting, it helped me out. That C clip was a pain, glad I did not have to reinstall it. The new dust cover was spring loaded and snapped in place easily.
Glad it helped!
Thanks for the video SnareMan! Really helped a lot.
YOu're welcome! Thanks for watching!
super helpful. got it done in 5 min first shot. thanks for the vid!!
You're welcome!!
Your technique worked well. Had it changed out in under 5 min. Thanks!
So, I did mine in literally 5 minutes. Instead of using tweezers for the c clamp, use the flat tab of a cheap bic pen cap. Worked on the first try with ease!
Glad it was so easy! :-)
i just could not figure out how the hell to put the dust cover spring back on. i didnt realise i had to twist it. thanks man, liked
Thanx for the video and tips. This helped out a lot.
You're welcome! Glad you found it helpful!
Thanks bro I was trying to put my rig back together after a paint job and couldnt get the proper tension you solved the issue thanks!
No problem. Glad it helped!
9 years later... Thanks for the great video man!
You're welcome Cory!
Great video. Super easy install after watching this. Thanks
You're welcome!!
Very helpful video indeed thank you for the tip about the tape saved my rifle some scratches thank you
Your'e welcome! :-)
Thanks. Your technique made it a five minute job!
Excellent video!
jamulAK Thanks!
Thank you very much for an excellent video. It sure made my project go smoothly!
Great instructional video, used your technique and replace the cover in less than 5 minutes. Thanks.
+Gerry Douglas YOu're welcome! Glad it helped!
Nice vid. Was able to swap out dust covers with no problems. Thanks.
Rod Macedo Thanks! Glad it helped!
Thanks a lot! Helped me get the job done first try ;)
Glad it helped!
Amazing how such a tiny piece requires 2 tools to work with it! 😆 I know the frustration as I just did my very first one yesterday! A booger it is for sure! And I really like that sharp needle nose tweezers you have! I need to find a pair like that. Looks like they come in very handy! So I can testify that in addition to those "precision" tools, this "simple" procedure does require patience, persistence and 2 STEADY HANDS!! WELL DONE!!!😊👍
Thanks!
They actually make a set of pliers specifically for these Jesus clips
This video was perfect. I used some tape two punches and a pair of pliers and it took me about 5 minutes. Maybe I got lucky haha thank you!
You're welcome!
Thanks real big help. Great advice. I did mine in less than 5 min after seeing the video
You're welcome! Glad you were able to do it so easily!
Thanks alot for this video. Me and my friend were stripping some hydro dip off my ar15 and he didn't put the spring on correctly. I was thinking I had to take the barrel nut off again. This saved me a hassle. 🖒🖒🖒 thanks again friend!
You're welcome! Glad it helped!
Thanks for the kind words and sub! :-)
Excellent video! I was thinking I would have to remove the barrel to replace a broken cover spring! Sure glad I came across this video had it replaced in under 10 minutes!
Glad it helped!
Thanks! Worked great.
Thanks for the video! Your suggestions definitely helped!
+Kris C Sr Glad you found it helpful!