How To: Duramax Turbo Install LBZ LLY LMM
Вставка
- Опубліковано 5 сер 2024
- Full turbo install on 2003-2010 Duramax trucks LLY LBZ LMM. LB7 is similar but there are few different bolts.
Easy DIY !
Get your ceramic coating here!
avalonking.com/products/armor...
Used code: NAZTY25
For 25 bucks off!!!
2004 GMC Yukon LBZ Duramax Swap:
2500 Yukon/Suburban Chassis
LBZ swap came from a full donor truck that was wrecked
Air Dog 165 Lift Pump fuel system
Duramax 11.5 AAM rear end
Body lift stepped from 0" in the rear to 2" in the front
2006 Single Cab LBZ Duramax
Wheels/Tires:
22x14 American Force Locus
33x12.50 Amp Terrain Attack MT
Suspension: Stock Front, 3 inch Lowered Rear
Boost Auto Parts LED Switchback Tow Mirrors
Black Label Lighting white rock lights
Paint Match Bumper and Flares Summit White
Auxbeam Headlights
Auxbeam Fog Lights
Other Mods:
Kryptonite control arms
Kryptonite death grip tie rods, center link, pitman arm, idler arm, idler arm bracket
Kryptonite wheel bearings
Arp Head Studs
WC Fab Y Bridge Kit (Gloss Black)
LB7 Up Pipe
WC Fab PCV Reroute
Merchant Auto Welded Water Pump
5 inch Straight Pipe
10 inch Axle Dump
Duramax swapped suburban yukon
How to CERAMIC COAT your vehicle!
www.youtube.com/watch?v=KH9eR... - Авто та транспорт
Thanks Nate. Did the turbo on my silverado with 305000 miles. Your video was wonderful. Without it I would never have been able. Saved $3200.
Glad it helped! That's awesome to be able to save that much money!
Thanks Nate! Helped me finish off my turbo rebuild and install.
Good info. Appreciate you being as through as you were without the unnecessary stuff👍🏻👍🏻
Finally. Happy to see her up and going again
Right!?? Thanks brother!
Awesome informative video 👍 Thanks Lmm in Colorado 🤠
Awesome video!!!
Great video
you made it look easy , shop time on an LMM is 14Hr. and is a job even pros don't like to do so we'll see Thanks
It ain't too bad man!
A few tricks u showed we’re lifesavers
Glad they helped!
The fun of owning a Duramax. Lol good job tho. Very informative.
The fun of owning anything old! Lol!! Thanks brother!
Dude best how to video on utube well explain
Thank you! That's exactly what its for!
@@NaztyNate this is my channel to follow the steps for my future duraburb build
Hi
Great video giving me the confidence to tackle turbo swap myself !
Where should I go for turbo replacement ? I have an LMM.
Thanks
Dom
im doing my lly tomorrow wish me luck! Ive watched this video twice!
How did it turn out ??
How did it go
My truck was completely stock so there was a few extra obstacles. But all in all everything went well truck runs great!
@@xXJKIRK70Xx did you need to do a vane sensor relearn with a tech 2 or did it do it without needing a handheld?
@user-sb2uh7ke9z i took it to the chevy dealership the calibrated the new sensor for about $50 in oregon
OUTSTANDING video repair! I've had a Turbo code for at least 4 years and now with 245,000 .... I better get busy and replace it - 2007 Sierra/4x4 - Stock.
What was the noise you had on the old turbo
I was told if I clear the relearn codes on my CTS3 it'll do the relearn by itself? Anyone know if that's true?
Dealer to relearn ? Doesn't it relearn itself by leaving key in run postiontion without starting 90 seconds .. ?
I see your cat fuel filter, is your oem water separator unplugged? Does it give you any dtc codes. I want to run the black widow 95gph fuel pump but im wondering about disconnecting the fuel heater and water separator wires if i will throw a code
I put a CAT fuel filter on my LBZ the only thing that comes up is change fuel filter on the dash. If you want you could run a jump wire in the old connector and tape it up real well. I did not worry about my engine light never comes on for it.
Missed ya buddy hope all is well!
I appreciate it man! Everything is good here! Been taking a break from working on stuff/filming because life is catching up..I plan to film more soon!
Did you need to use a tech II for a cane sensor relearn? I’m installing a RDS on my LLY tomorrow. Heard it will relearn itself once the truck gets up to temp?
I am not sure if it will re-learn itself. I took it to a tuner. I think he did use a tech 2 actually.
What part number turbo is that?
Turbo part number and where did you get it?
Where u get ur turbo?
Is this an OE replacement? Any particular reason for not going ahead and upgrading when you had to replace? New to the diesel deal and trying to plan my LB7 Burb swap.
Yes it is, I just didn't want to re tune my truck. No other reason than that! There are tons of great options for upgrades
@@NaztyNate I'll hit you up for that A/C line guy if this deal goes down! Hopefully he makes them for an 01/LB7 combo too!
boutta replace the turbo on my Lbz van.. hoping all goes well
not 100% sure but you might be able to get better access from inside the van under the center console
@@NaztyNate that’s what i’m thinkin
About how long does a job like this take? Everyone I've asked keeps telling me it will take about 12 hours.
That's probably about right. I did it over a weekend
How is different from this truck to a lmm
Should be the same on an LMM
This video makes it seem so simple to swap the turbo. I’m looking to do mine on my lb7 and after watching your video I said “hmm that’s it?” Haha
What’s the vein sensor and why do you have to relearn it?
LB7 doesn't have that sensor! and it is a bit different on an LB7 but its definitely do-able!