Mercedes W126 gears repair Speedometer & Odometer by JMSpeedshop.com

Поділитися
Вставка
  • Опубліковано 25 гру 2024

КОМЕНТАРІ • 53

  • @zaidal-hashimi9089
    @zaidal-hashimi9089 2 роки тому +1

    Can you please share the link for the gears you ordered from eBay? Also the lubricant and glue you used?

  • @jimboernerjr.8794
    @jimboernerjr.8794 Рік тому +1

    Incredibly well done. Saved in memory!!❤

    • @JMSpeedshop
      @JMSpeedshop  Рік тому +1

      Thanks

    • @jimboernerjr.8794
      @jimboernerjr.8794 Рік тому

      @@JMSpeedshop btw I just rebuilt a cluster and on mine the left side plastic slip for turn signal, O² sensor, etc is missing. If you happen to know where a guy could get a set?

  • @kalfoogaltmimi5043
    @kalfoogaltmimi5043 11 місяців тому +1

    Please write a link to purchase gears

    • @JMSpeedshop
      @JMSpeedshop  11 місяців тому +1

      Search on eBay w126 speedo gears

  • @scvs5286
    @scvs5286 8 місяців тому +1

    Thanks for the good video.😊
    I have a question. My car is W126 300se. Can you tell me the number of third gears?
    please help me......

    • @JMSpeedshop
      @JMSpeedshop  8 місяців тому

      The number? Number of teeth on the gear . The small one is 12 i think

  • @robseignior4389
    @robseignior4389 5 років тому +2

    Thanks for sharing your knowledge.

  • @wurly164
    @wurly164 4 роки тому +1

    I saw in another video the white gear was put on so the lip was behind the big gear

  • @chrisgooi
    @chrisgooi 3 роки тому +2

    Thanks for the Great vid.

  • @teesaeed6529
    @teesaeed6529 5 днів тому

    vielen Dank

  • @hakosama
    @hakosama 3 роки тому +1

    Did gluing the small gear work? Because I have the same problem and I am going to have to glue mine but before I do I wanna know that worked. Thank you

    • @JMSpeedshop
      @JMSpeedshop  3 роки тому +2

      Yes still works without problems

  • @Sayffe
    @Sayffe 5 років тому +2

    Nice video, thank you ! Can you give us the link pls ??! I have the exact same probleme on my 190 !

    • @JMSpeedshop
      @JMSpeedshop  5 років тому +2

      Search on eBay. Mercedes speedometer Gear Then You Will Find a lot have a look for the right model so in your case w201 and for KLM OR mph i thought there is a difference in hoe Many teeth on the gears

  • @chrisgooi
    @chrisgooi 3 роки тому +1

    Sir, do you find reinstalling the needles for w126 tough? Unlike w124. The pins wont stay/ cant press in the shaft. Or meter is broken?

    • @JMSpeedshop
      @JMSpeedshop  3 роки тому +2

      IT was pretty easy to do . I had no problems

  • @twoodruff01
    @twoodruff01 4 роки тому +1

    Hello, I have a 1986 Mercedes 560 SEL and I repaired the gears for the speedometer. Now, I can't get the cluster back into the dash. Is their a trick to it? It came out easy, I just can't get it to fit back in. Thanks, Tom

    • @JMSpeedshop
      @JMSpeedshop  4 роки тому +2

      There is a rubber deal around the cluster and springs that Hold IT in place in the Dash. Make Shure that there are no wirings in between. You need to push IT in against the spring pressure

    • @twoodruff01
      @twoodruff01 4 роки тому +2

      @@JMSpeedshop Thanks, I finally got it in place.

  • @7425park
    @7425park 2 роки тому +1

    Very good explanations, very clear video.

  • @petermai4663
    @petermai4663 4 роки тому +2

    Looks good thanks 🙏🏼 a lot

  • @GabrielAlmeidaSoares
    @GabrielAlmeidaSoares 3 роки тому +1

    Very good. Thanks a lot.

  • @aorathomas
    @aorathomas 4 роки тому +1

    How can i get those gears im in kenya

  • @IQ.Cars.Airplanes
    @IQ.Cars.Airplanes 4 роки тому +1

    I have problem withe my "oil pressure gaga" , when the car is cold it's running as it should, but wen I drive it for about 40min or more it goes down to 0 all though the oil pump works fine, Not : When I tap on the dashboard it starts running again !!!Any ideas 💡?

  • @smackmag
    @smackmag 5 років тому +1

    The odometer on my C140 doesn’t work... same setup?

    • @JMSpeedshop
      @JMSpeedshop  5 років тому +2

      Could be . Never opened one on a w140 early analog one's should not be much different i think

  • @denuwan9
    @denuwan9 3 роки тому +1

    How many Fuel consumption in per liter of W 126 Mercedes Benz 3000cc diesel engine car?

  • @nazimansari9415
    @nazimansari9415 4 роки тому +1

    How ican check the speedometer mercedes 126

  • @13Makker13
    @13Makker13 5 років тому

    Ga je de snelheidmeter in de w201 behuizing maken? Ben ik nu ook mee bezig voor mijn w201 2.8 m104.

    • @JMSpeedshop
      @JMSpeedshop  5 років тому

      Ja dat is de bedoeling maar eerst de teller maar even getest en gerepareerd voor het inbouwen

  • @mr.h.8363
    @mr.h.8363 5 років тому +3

    I bet that's the VDO brand.

    • @JMSpeedshop
      @JMSpeedshop  5 років тому

      Yes

    • @mr.h.8363
      @mr.h.8363 5 років тому

      @@JMSpeedshop Those gauges tend to go out! I found out from owning a VW. Problematic!

  • @florenciomendez5529
    @florenciomendez5529 4 роки тому +1

    I just realized today my car speedometer is not working 🤦🏽‍♂️ 85 500Sel

  • @sonyhk3824
    @sonyhk3824 5 років тому +1

    Nice

  • @mariuszsiminski8374
    @mariuszsiminski8374 Рік тому +1

    VW t5

  • @vitormanuellopesagudovitor9733
    @vitormanuellopesagudovitor9733 3 роки тому +1

    Portugues

  • @coldwarmachine
    @coldwarmachine 5 років тому +1

    one question everything in my console works bar the fuel level. i can jump the two cables coming from the sender to earth and then the tank will read full, do i just have a bad sender or bad cable coming from the dash to the rear of the car would you know?

    • @JMSpeedshop
      @JMSpeedshop  5 років тому +1

      The best thing to start with is to check if all connectors are free of corrosion so You got a good signal. But if You tested the Dash gauge that is working so try to test the wiring at the sensor and do the same and look if the gauge on the Dash Will also have a full reading if this works and the connectors are free of corrosion You have a bad sensor . Take IT step by step to sort IT out.