PMT Universal HUB for Simracing wheels
Вставка
- Опубліковано 5 лип 2024
- Introducing a universal hub which enables connecting any steering wheel with 70mm mounting holes and full customisation of buttons layout.
Join me on Facebook: / peter-makes-things-106...
3d model: www.cgtrader.com/3d-print-mod...
Parts list:
- BluHID (www.u-hid.com/home/overview_bb...)
- 10x M3 6mm screw
- 4x 35mm M4 countersunk screw
- 4x M4 nut
- Buttons, my setup includes :
○ 18x button (tinyurl.com/tgd5eer)
○ 2x rotary encoder (tinyurl.com/rm9ngz3)
○ 2x the toggle switch (tinyurl.com/sygxzqt)
- Silicone wires (preferably in multiple colours)
TM version:
- 4x M5 35mm flanged button head screw (tinyurl.com/w4axrpk)
- 6x M5 40mm countersunk screw
- PS2 connector (tinyurl.com/yx24v7y8)
- Slim quick release (bit.ly/2O9JWfj)
- 2 Pin JST XH2.54 Connector (tinyurl.com/r29x3mn)
Non-TM version
- 4x M5 35mm flanged button head screw (tinyurl.com/w4axrpk)
- 4x M5 nut
- 6x M5 50mm (or longer depending on the setup) countersunk screw
- Lipo battery (1S 3.7V, anywhere between 500mAh and 1200mAh)
- Lipo charging module (tinyurl.com/vhf9dbm)
- 2 Pin JST XH2.54 Connector (tinyurl.com/r29x3mn)
- 4x M5 washers (optional)
Notes:
- The maximum diameter of button mounting screw (the one holding it from the bottom on cover plate) is 17.5mm (0.69in)
- Included button covers have cut-outs of 13.4mm (0.53in) for buttons and 7.5mm (0.3in) for toggle switches/rotary encoders
○ The cut-outs can easily be amended so please contact me directly on 'petermakesthings@gmail.com' to request additional versions
- Printing settings
○ Hub body and Hub cover are designed to be printed with 0.35mm layer height (although 0.2mm should work fine as well), all remaining parts have to be printed with 0.2mm layer height
○ No supports required for any of the models
○ Hub cover has a sacrificial layer for the screw hole, use a scalpel to gently remove it
○ Buttons body (both x3 and x4) models include a support that needs to be removed with pliers after the print is done
- For non-TM version I highly recommend using an M5 washer between '70mm adapter' and bottom rail for added durability
- Paddle shifters showcased in video can be found here: www.thingiverse.com/thing:390...
Compatible magnetic paddle shifters are included in this design by 'Fox_85': www.thingiverse.com/thing:302...
Intro music: Borys Kozielski - Наука та технологія
Super video as always Mr Peter! Love it!
Good job Peter 👍
Fantastic!!!
ingenious!
Hi Peter great video. Do you know if all of those buttons would work on PS4 for ACC?
That sparco half wheel looks sick.,and are u gonna sell the 3d files of the tm quick release?
Email me, petermakesthings@gmail.com
Hi Peter, I'd like to use the BluHID board in a project, but I can't find its dimensions anywhere on their website. Do you know what the length and width is of the board?
it's 61mm x 33mm, good luck on your project :)
BONJOUR JE VOULAIT S AVOIR POUR OSW C EST OK ,? LA CARTE QUE VOUS UTILISER OU PEUT TON L ACHETER CAR JE SUIS SUR LE SITE JE NE VOIS PAS D INFORMATION COORDIALEMENT
There's a link in description to cgtrader where can get the .stl files, or contact me directly petermakesthings@gmail.com
is very well seen ... is the alternative to the cable or the limitation of buttons in thrustmaster and others, similar to the wireless solution of granite devices (simucube2) also if the TGT plate would be copied and adapted for arduino would be fine, I would I'm changing it
https: //ibb.co/TgWX1D8
There is an adapter on thingiverse already (www.thingiverse.com/thing:3967322) so you can always try it out, but I'm not sure if 3d printed parts are durable enough for dd wheels, don't have one so can't test it
How much was it to build
I paid £50 for the BluHID, used a bit over 200g pla filament plus all the nuts, screws and buttons listed in description, if it wasn't for the board it would be a fairly cheap build, and I'm working on alternatives now
@@petermakesthings7342 even then that is so cheap
@@tehgusbus2716 well yes and no, this is just plastic, if I had a cnc router that would be a different story...
@@petermakesthings7342 how much are those
@@tehgusbus2716 I meant that if I had the machine that allows me making aluminium parts that would make the build more expensive but at the same time way way better
Look, i'm completely ham fisted and talentless, I don't own a 3D printer and i'm lazy, so pleeeaasse, sell me one of these universal hubs for the TM or at least a kit of all the parts ready to assemble, and I will love you forever :)