Inside the case there’s two Allen key openings. You can adjust the drop limit to increase or decrease and you can also adjust the retract limit of it goes into far or not far enough. The switches are on the side with the motor which is will be the side the cord goes into obviously. Make very small incremental turns as to not over do it.
Yeah there is a limit bar (someone on one of the two videos had pointed out) good looking out! Ultimately I set a timing for it with Logitech Harmony so I never had to mess with it. While a Harmony remote can be pricey, totally worth it and the way to go for me. :D Opens to the perfect spot where I want it (headache to set up at first but once it's set...golden!)
Wish you would have shown what type of electrical outlet was needed. Is the screen battery operated? Or do you need a 110 standard outlet to Plug into?
In the US it's a standard 110 type B grounded. If you're buying from a European based site I believe they sell those standards specific to those countries listed in their listings. This listing for the model(s) should inform you on these things in more detail under their details. Elite Screens also lists this on their site :)
Hello, greetings from Costa Rica, I have a ZSP-WB-B screen, Version V2. 0 the screen only had the square control, when I installed it I did not press the stop button and the screen unrolled completely and fell to the floor, I put it back on the roll, but I was left with a part outside, it does not collect completely I wanted to know if it is a programming problem or what could be the problem, thank you
I believe what you want to set is the rollout limit for setting the screen drop distance. Calling them tomorrow for details on where to find the rollout limit set screw.
Eight-Six do you know exactly where that set screw is? I couldn’t find it but I speculate it may be on the right frontside of screen housing (opposite is the IR sensor) behind a 2”-3” plate with two screw holding the small plate on.
So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.
Oh for sure! Depending on how much you are looking to spend there are some really awesome screens out there - Just as an example check for some of the Black Diamond Screen samples. You may want something different after browsing around.
I swear I thought I replied to this! Sorry! Ripples are not apparent, the tension bar at the bottom of the screen holds the screen tight enough (at least on mine). Elite Screens recommends letting the screen down to rest for 24ish hours, but mine was pretty on point the first time I let it down.
Hahahahaha at 4:08 as I was afking while listening to the video I heard him say, "Where I do do some screen tests." It made me smirk and think haha he said doo doo xD. Immediately after my thought it cuts to him pointing out that he said doo doo and thought it was funny as well. Sub for sure mate.
The new models are about 25-30lbs this one was one of their gen 1 ones they have since changed with lighter material (and the better anchors allegedly). The housing was hefty.
Ben Howell the absolute goal was to get people who feel like it was a waste time to watch the video, to then waste more time by hammering out a comment. LETS GO SLOMO SHOOT SOME MATOES NOW
So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.
Inside the case there’s two Allen key openings. You can adjust the drop limit to increase or decrease and you can also adjust the retract limit of it goes into far or not far enough. The switches are on the side with the motor which is will be the side the cord goes into obviously. Make very small incremental turns as to not over do it.
Yeah there is a limit bar (someone on one of the two videos had pointed out) good looking out! Ultimately I set a timing for it with Logitech Harmony so I never had to mess with it. While a Harmony remote can be pricey, totally worth it and the way to go for me. :D Opens to the perfect spot where I want it (headache to set up at first but once it's set...golden!)
They don't even show this in the manual or white paper. Thank You
Wish you would have shown what type of electrical outlet was needed. Is the screen battery operated? Or do you need a 110 standard outlet to
Plug into?
In the US it's a standard 110 type B grounded. If you're buying from a European based site I believe they sell those standards specific to those countries listed in their listings.
This listing for the model(s) should inform you on these things in more detail under their details. Elite Screens also lists this on their site :)
Hello, greetings from Costa Rica, I have a ZSP-WB-B screen, Version V2. 0 the screen only had the square control, when I installed it I did not press the stop button and the screen unrolled completely and fell to the floor, I put it back on the roll, but I was left with a part outside, it does not collect completely I wanted to know if it is a programming problem or what could be the problem, thank you
There is a limit bar that should stop it at two points. If it didn't it sounds like the limit bar is missing or damaged.
I believe what you want to set is the rollout limit for setting the screen drop distance. Calling them tomorrow for details on where to find the rollout limit set screw.
Eddy Bobby there is a limit screw for it, I just use a timer on the harmony remote for a setup sequence 😊.
Eight-Six do you know exactly where that set screw is? I couldn’t find it but I speculate it may be on the right frontside of screen housing (opposite is the IR sensor) behind a 2”-3” plate with two screw holding the small plate on.
If you're facing the front its on the backside left hand side
On my version is was behind a sticker...
How loud is the motor?
So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.
Victor Hopson hell yeah good find I’m going to look in to that. It’s already super simple to control but why not make life easier! Thanks!
Can you elaborate more in detail how to set the set point. Thx!
Could I use this screen with the optoma uhd40? Also could you recommend some 110 inch motorized screens???
Oh for sure! Depending on how much you are looking to spend there are some really awesome screens out there - Just as an example check for some of the Black Diamond Screen samples. You may want something different after browsing around.
Did you make a Part 2 of this video with UST projector on this screen?
Sudheer Vijayakumar I did! And I demo’d some of the issues. Check my videos and it should be at the top
Is this battery or need 120v source
No battery on this one, wall power.
are ripples an issue with this screen? That's what I'm most worried about
I swear I thought I replied to this! Sorry! Ripples are not apparent, the tension bar at the bottom of the screen holds the screen tight enough (at least on mine). Elite Screens recommends letting the screen down to rest for 24ish hours, but mine was pretty on point the first time I let it down.
Hahahahaha at 4:08 as I was afking while listening to the video I heard him say, "Where I do do some screen tests." It made me smirk and think haha he said doo doo xD. Immediately after my thought it cuts to him pointing out that he said doo doo and thought it was funny as well. Sub for sure mate.
Mr Catcher doodooclub 4 life
You have really nice eyes!
I highly doubt that screen weighs 60 lbs.
The new models are about 25-30lbs this one was one of their gen 1 ones they have since changed with lighter material (and the better anchors allegedly). The housing was hefty.
8 min I won't get back
All your doing is whining about everything about it and now even showing how it performs. Waste of time to watch this video
Ben Howell the absolute goal was to get people who feel like it was a waste time to watch the video, to then waste more time by hammering out a comment. LETS GO SLOMO SHOOT SOME MATOES NOW
So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.