I have the same controller. I can't get the right analogue to look left and right. It appears to be mapped but does not work. All it does is move the mouse left or right?
I use controller and this is my personal keybind : Shoulder Gas is R2/RT Brake is L2/LT Drive gear is R1/RB Neutral is R1/RB (hold) Reverse is dp.down+R1/RB Wiper is L1/LB Handbrake is L1/LB (hold) Diff.lock is dp.down+L1/LB Trailer coupling is dp.down+L1/LB (hold) Dpad Infotainment zoom is dp.up Dashboard mode is dp.up (hold) Cruise is dp.right Route advisor nextpage is dp.right (hold) Cruise resume is dp.left Photo mode is dp.left (hold) Modifier 1 is dp.down Cruise + - is dp.down+dp.left/dp.right Next/Prev song is dp.down+dp.left/dp.right (hold) Face button Flash is ∆/Y H.Beam is dp.down+∆/Y Hazard is dp.down+∆/Y (hold) Engine brake is []/X Left signal is dp.down+[]/X Retarder decrease is dp.down+[]/X (hold) Light mode is O/B Beacon is O/B (hold) Right signal is dp.down+O/B Retarder increase is dp.down+O/B (hold) Horn is X/A Airhorn is dp.down X/A Stick button press Interior zoom is L3/Left stick Interior look mid is R3/Right stick Lift truck axle is dp.down+R3/Right stick Lift trailer axle is dp.down+R3/Right stick (hold) Select Radio is dp.down+select Electric start is dp.down+select (hold) Engine start is select Map is dp.down (hold) Start Activate is start Pause is dp.down+start Menu is dp.down+start (hold)
Would be cool if you could copy past your controls.sii for easy copy of controls ngl, going to set this up for myself, as it looks like it covers everything you could want on a controller.
Ty!!! That stupid non-linear steering setting had me so confused and my truck was steering all kinds of stupid. Best to leave it at zero. And what is your turning radius set at? Mine is at 350 degrees and I'm not sure if that's right either? But it sure feels much better now. Cheers and happy trucking.
Hey mate, can you please give me a rundown of your settings for your controller? In terms of using the right stick as a throttle. I am having issues with mine. Thanks
Go to Control Settings and assign the right analag stick to the Acceleration axis. Select the Acceleration axis under the control settings and push the right analog up to assing it to Accelerate. Then select the Brake Axis and push the right analog down to assign it to braking.
Yh thee vibration should happen automatically. If it doesn't you can check the settings to find vibration settings. if you have an original xbox controller then it should happen automatically.
If you can connect the controller to your pc then yes. You have to choose "Keyboard and Controller" in the control settings to be able to use both your keyboard and controller.
Hi there. I have a steering wheel, but since I can't leave it set up, I sometimes want to play but can't be bothered to get the wheel. I was thinking about using the controller for the times when I don't want to use the wheel. Is there a way to configure the controller without messing with the steering wheel settings (sensitivity, keybinds, etc)? Thank you in advance
Yh you can use the secondary key binding for you controller. For you not to mess with your steering sensitivity, select controller on the controller type.
My controller has inputs that I can't customize or disable, such as the Y button being both the handbrake and the detach trailer button while I binded it as my shift up button. How do I fix this
in the settings it says that my Y button is only binded as the upshift button. I dont know why it pull the handbrake and detaches the trailer too@@LonelyTrucker
Hey can anyone help cause idk how to change the breaks to soft instead of instant
Change brake intensity
The right stick is not binding to acceleratipn and reverse
You have to go to Controls and change it there. I think its under Acceleation Axis or something
@@LonelyTrucker I couldn't find acceleration axis
Were to find keys & buttons for acceleration
Check the Controls settings
Whats your steering sensitivity
? As you move it smoothly and my mine can't.
Change the controller subtype under the controls setting to Gamepad
Thank you!!!
I have the same controller. I can't get the right analogue to look left and right. It appears to be mapped but does not work. All it does is move the mouse left or right?
Check the control settings and map the analog to the look left or right control
@@LonelyTrucker I have it mapped and can see that the axis functions, but in game it does nothing?
Change the Controller Substype under the controls settings to Gamepad
@@LonelyTrucker I have done this. It works for exterior view, but I want to use the control for interior view.
@@Crowdies DId you fix this? I dont know how pls tell me
I am using Xbox controller, too, but acceleration and steering are happening with the same joystick; how can I change this?
same issue am facing
That means the acceleration axis is mapped to the joystick, just for to the controls screen look for acceleration axis and click unassign
I use controller and this is my personal keybind :
Shoulder
Gas is R2/RT
Brake is L2/LT
Drive gear is R1/RB
Neutral is R1/RB (hold)
Reverse is dp.down+R1/RB
Wiper is L1/LB
Handbrake is L1/LB (hold)
Diff.lock is dp.down+L1/LB
Trailer coupling is dp.down+L1/LB (hold)
Dpad
Infotainment zoom is dp.up
Dashboard mode is dp.up (hold)
Cruise is dp.right
Route advisor nextpage is dp.right (hold)
Cruise resume is dp.left
Photo mode is dp.left (hold)
Modifier 1 is dp.down
Cruise + - is dp.down+dp.left/dp.right
Next/Prev song is dp.down+dp.left/dp.right (hold)
Face button
Flash is ∆/Y
H.Beam is dp.down+∆/Y
Hazard is dp.down+∆/Y (hold)
Engine brake is []/X
Left signal is dp.down+[]/X
Retarder decrease is dp.down+[]/X (hold)
Light mode is O/B
Beacon is O/B (hold)
Right signal is dp.down+O/B
Retarder increase is dp.down+O/B (hold)
Horn is X/A
Airhorn is dp.down X/A
Stick button press
Interior zoom is L3/Left stick
Interior look mid is R3/Right stick
Lift truck axle is dp.down+R3/Right stick
Lift trailer axle is dp.down+R3/Right stick (hold)
Select
Radio is dp.down+select
Electric start is dp.down+select (hold)
Engine start is select
Map is dp.down (hold)
Start
Activate is start
Pause is dp.down+start
Menu is dp.down+start (hold)
That sounds good
@@LonelyTrucker its crazy how many keybind can be added with just 1 modifier key
Would be cool if you could copy past your controls.sii for easy copy of controls ngl, going to set this up for myself, as it looks like it covers everything you could want on a controller.
also, what is flash? cannot find anything called flash in controls
@@onlytwogenders420 its called light horn in game
unless i missed something I can't see button for attach/detach trailer, or do you use keyboard for that?
I use a keyboard
The wipers also...
I use the keyboard for that as well@@KiLLuminati.
Can you export steam setting for gamepad to ets?
Yh I think so. You will find that in the controls settings
I have a wheel but for some reason it just thinks it a controller and it can’t turn or accelerate or brake so I have to use controller 😣
So sorry but I don’t think I can help with that
I have sony controller but unable to look Left/right with right Joystick - where ya bind keys ??
You have to change the controller subtype under the control settings to Gamepad
@@LonelyTrucker will see if I can find it.
for some reason I can't assign my triggers (LT / LB) . All other controller buttons and joysticks work fine... Do you have any idea why?
You have to choose your game controller at the controls settings. Where you can switch between your keyboard and controller
Bro can give buy link of your controller 🎮??
www.amazon.com/Xbox-Wireless-Controller-White-one/dp/B01GW3H3U8/ref=sr_1_13?crid=7EBUKW06ZD3M&keywords=xbox+controller&qid=1691909537&sprefix=XB%2Caps%2C671&sr=8-13
How about engine brake?
That’s all up to you. You can choose whatever button you want. I don’t use engine brake, I only use the retarder
Can you sahre your mods? Especially your light mod
Ty!!! That stupid non-linear steering setting had me so confused and my truck was steering all kinds of stupid. Best to leave it at zero. And what is your turning radius set at? Mine is at 350 degrees and I'm not sure if that's right either? But it sure feels much better now. Cheers and happy trucking.
My steering sensitivity is set as 0.40
Hey!👍
I can't change my controller binds (PS4)
Do I need to turn off steam input?
(How can I change the binds?)
Yeah try that lets see if it works
hey i'm having the same issue :( any luck?
Yeah it worked just turn off steam input.
@@LonelyTrucker thank you!
if you press the trigger just a little, the accelaration goes slow or full throttle?
It goes slowly. The more you press it the more the acceleration
@@LonelyTrucker i spend 2 hour for looking this answer to buy gamepad for ets 2 thank
just want to find out trigger can simulator the accelaration
Hey mate, can you please give me a rundown of your settings for your controller? In terms of using the right stick as a throttle. I am having issues with mine. Thanks
Go to Control Settings and assign the right analag stick to the Acceleration axis. Select the Acceleration axis under the control settings and push the right analog up to assing it to Accelerate. Then select the Brake Axis and push the right analog down to assign it to braking.
so I cant use joystick to control camera?
Yes. You can map it to any of the analogue controls in the Controls Settings
Can you help me , my d-pad buttons only shift for like third gear
Do you drive a manual or automatic?
thanks.
You're welcome
hi i have a same controler is there any way to enable controller vibration in ets 2 ?
Yh thee vibration should happen automatically. If it doesn't you can check the settings to find vibration settings. if you have an original xbox controller then it should happen automatically.
it vibrates only when i crash into something or when i go offroad
@@reverbmusic8444 Ets2 has limited vibration only, not unlike other driving games
Thx for the settings!
u dont show what degrees you use 1800, 900 or 1440? on your controller what is the best one
What setting do those numbers come under?
@@LonelyTrucker this settings is in the gameplay, " steering degrees"
default for sure@@Tay_beats98
Bro could you give me the Android phone mod that you see in your truck?
This is how you use the controller for ets2
Yh
Can I map the CB PTT to a gamepad button?
What is CB PTT?
@@LonelyTrucker CB radio, Push To Talk button. I believe the standard assigment is the X key on the keyboard.
Heard you're voice I think ❤❤❤
Thanks 😁
why i can't change the keybind for controller? its only for the keyboard
Change your controller type setting to Keyboard and Gamepad
Hi mate. Can you use ps5 controller for steering and look around. And have your keyboard as your main console for changing things on the truck ?
If you can connect the controller to your pc then yes. You have to choose "Keyboard and Controller" in the control settings to be able to use both your keyboard and controller.
nice setup, what mod are you using for the engine sound of the scania?
Get it on steam
steamcommunity.com/sharedfiles/filedetails/?id=2884251461
What mods do you have, your game looks really good
I don't have any graphics mod activated. That's just a little color grading
Hi there. I have a steering wheel, but since I can't leave it set up, I sometimes want to play but can't be bothered to get the wheel. I was thinking about using the controller for the times when I don't want to use the wheel.
Is there a way to configure the controller without messing with the steering wheel settings (sensitivity, keybinds, etc)?
Thank you in advance
Yh you can use the secondary key binding for you controller. For you not to mess with your steering sensitivity, select controller on the controller type.
@@LonelyTrucker Thank you! I really appreciate it 😊
Congratulations 4k SUBSCRIBE
do u use combo function to all in one on xbox controller?
i don't know what you mean by Combo funtion but I use both the controller and the keyboard.
My controller has inputs that I can't customize or disable, such as the Y button being both the handbrake and the detach trailer button while I binded it as my shift up button. How do I fix this
You should be able to customize the controls. You mean you can't change the key in the settings?
in the settings it says that my Y button is only binded as the upshift button. I dont know why it pull the handbrake and detaches the trailer too@@LonelyTrucker
same problem here on version 1.48
@@LightThingies I found the solution, so basically you gotta go into the gamefiles and find the steam controller settings. Then just delete them.
@@jasonsmith2268thank you so much man
Ile takie coś jest w stanie pojechać?
It depends on how far you want to take it
Why not using ps controller and use gyro sensor for turn?
I prefer the Xbox controller
@@LonelyTrucker Xbox didn't have gyro bro..
@@achridhan I don't need it😊
Ps 3 please
Unfortunately I don’t play on ps3 so I don’t know how that works
Controller 🎮 naam please sir controller 🎮 links
Xbox 1 Controller
Price kya hai bhai... please brother reply
@@AltafChudhry-mq1lj Its an Xbox 1 controller
about 60/70usd, it may differ in your country. @@AltafChudhry-mq1lj
Bro you a Ghanaian??
Yes I am
I figured with the accent.. lol.. Have been watching you and I wanna say you have great videos. Keep it up bro…
Thanks bro@@perrybryantbonsu7330
👍👍👍
Were find for ats
Works for both ats and ets2
Can you make hand cam video
Unfortunately I don’t make mods
@@LonelyTrucker
I mean, you show your controller when you play like this 0:58
Hey man i cant cange the lb and rb
Change the control subtype settings under Control Settings to Gamepad, Joystick
You sound like ghanaian.
Yh I am😃
@@LonelyTrucker yup ! I was right
Why is not L3 button for horn and Button B for Handbreak 🥲
Preferably I use L3 for cruise control on/off and B for horn. It works well for me