Impossible Bevels using Hard Ops and Mesh Machine in Blender

Поділитися
Вставка
  • Опубліковано 28 вер 2024
  • Well this video was a killer... Only because I've been ill for the last week and a half, culminating in loosing my voice at the end of last week. Luckily I try to be a video ahead in editing but even with that I was cutting this to the wire hoping for my voice to improve enough to record and then get the editing done. Thankfully it all turned out OK, I just need to try and get caught up again!
    I hope you enjoy the video and find the ideas in it interesting, I tried to include some problem solving as well as its useful to know how to fix potential issues.
    (Affiliate links) SUPPORT THE CHANNEL BY BUYING SOME STUFF YOU WERE GOING TO GET ANYWAY ;p
    Hard Ops and Boxcutter discount bundle: blendermarket....
    Hard Ops: blendermarket....
    Boxcutter: blendermarket....
    Just Panels Add On: blendermarket....
    Construction Lines: blendermarket....
    Cablerator: blendermarket....
    Mesh Copier:blendermarket....
    Grid Modeler: blendermarket....
    Mesh Machin3: blendermarket....
    Curve Machin3: blendermarket....
    Decal Machin3: blendermarket....
    Punch It: blendermarket....
    (Non-affiliate links)
    Machin3 Tools: machin3.gumroa...

КОМЕНТАРІ • 39

  • @EPeltzer
    @EPeltzer Рік тому +6

    I have to say this kind of thing would be about 10 times faster in Plasticity. And the only way to achieve this quiclky is by using two or three add-ons and learning their ins and outs. Mesh machine hardops loop tools booltools. You might as well create something like this in plasticity and import it to blender and it would actually be simpler. I mean I think it's great that blender has lots of add-ons but some of them are incompatible you have to maintain them all and update them all etc etc kind of a messy pita.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому +6

      Yes and no. Without having to explain it I could knock this out in under 5 mins. 10 times faster than that would be 30 seconds and I find that unlikely. I'd be curious to see how quickly this could genuinely be done in plasticity though. I'd also be interested in seeing what the mesh looked like as I have heard some not great things about the meshes created.
      Don't get me wrong plasticity looks great but I'm not sure it's there for all the functions I would want in a program. I also have concerns buying something for $100 when that only lasts till the end of version 1. What if the functions I want don't come in until version 2.0? Spend another $100?
      Again I'm not slating Plasticity, these are just my genuine concerns about using it.

  • @3DCGdesign
    @3DCGdesign 9 місяців тому +3

    machinetools and mesh machine - the names aren't confusing at all.

    • @ArtisansofVaul
      @ArtisansofVaul  9 місяців тому +1

      🤣 I know. I get them wrong as I speak sometimes which can't help. But its like their "brand" so I get it.

    • @3DCGdesign
      @3DCGdesign 9 місяців тому

      it's so confusing that I literally didn't know what to buy and started watching tutorials for the wrong addon without realizing it. @@ArtisansofVaul ... doesn't help I work way too late at night.

  • @Hericus434
    @Hericus434 Рік тому +2

    Just a heads up, if you press Alt-E, you'll get a menu for extrude along normals and extrude individual faces - no need to go through hard ops :)

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      That's true but it can have issues which makes HardOps more efficient. I've got a short on it here: ua-cam.com/users/shortsnrA9YaBVsIo?feature=share

    • @Hericus434
      @Hericus434 Рік тому +1

      @@ArtisansofVaul Good to know! Loving these little tips videos

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      @hwerrell Thanks man. It doesn't always make a difference but I've got so used to doing it now and it takes about the same time to use both methods I just go with the one not likely to cause issues 😅

  • @Leevy27
    @Leevy27 Рік тому +7

    Unfortunately the sound is very low!

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому +1

      Sorry. Not sure why that would be.

    • @felixthecrazy
      @felixthecrazy Рік тому +1

      @@ArtisansofVaul Last one was as well.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому +1

      @felixthecrazy I wonder if that's something I may have clicked on the editing software or it's because I'd lost my voice around when these were recorded. I'll have a look into it and thanks for the feedback both of you 👍🏻

    • @2bit8bytes
      @2bit8bytes Рік тому +1

      @@ArtisansofVaul Just coming in to say I found it very low too.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      @S S Thanks. Always good to know.

  • @joshua42777
    @joshua42777 2 місяці тому +1

    Thank you for sharing! I am wondering what do you think about box cutter? especially in this case?

    • @ArtisansofVaul
      @ArtisansofVaul  2 місяці тому +1

      @joshua42777 I love Box Cutter. It's an amazing addon and I pretty much use it got 90-95% of my normal boolean workflow. It's so powerful, especially in combination with Hard Ops.
      I've got a playlist on it here if that helps: ua-cam.com/play/PLnqmLZKRm5CajsNlyFbieVyGxzdbBN-.html

    • @joshua42777
      @joshua42777 2 місяці тому +1

      @@ArtisansofVaul Thank you so much!!

  • @vyros5
    @vyros5 Рік тому +1

    Love your videos! easy to understand 😁

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому +1

      😁 That's wonderful to hear. Thanks for taking the time to comment 👍🏻

  • @michaelpeiffer7639
    @michaelpeiffer7639 11 місяців тому +1

    Newbie to 3d and was just wandering hiw to turn all this mesh into quads if need be?

    • @ArtisansofVaul
      @ArtisansofVaul  11 місяців тому

      You'd either play around with the points manually (with the boolean cleanup function in mesh machine it doesn't take too long) or use an addon like quad remesher

  • @quadgon
    @quadgon Рік тому +1

    1:38: It's is literally just as quick the normal way. "Alt + E" - choose "Extrude faces along normals".

    • @level10gnollwarlock
      @level10gnollwarlock Рік тому +1

      yeah found that to be the case as well.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      @Dennis Ooms That's fair. I'm just used to it now and prefer the layout /hitting Q is automatic for me at this point there Alt+E isn't.

  • @taerog
    @taerog Рік тому +1

    Great video!! Extremely helpful..
    Sorry you hot feeling well. Hope your better soon

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      Thanks man. Feeling much more on the mend now. There's one more croaky video to come I think 😅

  • @aknutal
    @aknutal Рік тому +1

    Pretty amazing work you do on this chan, it's a crime you don't have more views or followers. I think if you did some timelapse videos of making full 40k models, (just as 3D art, not for printing) to compliment your current content, you could pick up a ton of viewers. Don't know how comfortable you are in sculpting and such though (to make like daemons and stuff), but at least marines etc could be made with normal hardmodelling workflow :)

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      Thanks so much. I never know what that's what people want to see but would be happy to do some hard surface full time laps. Sculpting is something I really want to work on in the future as a focus area for me to improve. I started with hard surface so it would be good to branch out.

    • @aknutal
      @aknutal Рік тому +1

      @@ArtisansofVaul Definitely :) I'm the same, started just hardsurface but slowly learning to sculpt. I just think something like a timelapse of a full space marine would attract viewers. I was searching for one, but most are for zbrush or just old and not of very good quality. Definitely would be cool, as some of your chaos models are amazing looking. Keep up the good work :D

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому +1

      @@aknutal Cheers and I'll add it to the list for sure

  • @doomwalker9934
    @doomwalker9934 Рік тому +1

    I'm so glad I found your channels. It was even given Machin3's seal of approval.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      Thanks. And that's high praise coming from someone as accomplished as Machin3 😁

  • @richardokeeffe8375
    @richardokeeffe8375 Рік тому +1

    Late to the party. Great vid of multiple steps!

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      Thanks man. 👍🏻 I thought it was a nice series of skills to combine together

  • @phantomapprentice6749
    @phantomapprentice6749 Рік тому +1

    I always learn something new from your videos , well done.

    • @ArtisansofVaul
      @ArtisansofVaul  Рік тому

      😁 Awesome. I try to have each video included a new skill/technique so that's great to hear