Це відео не доступне.
Перепрошуємо.

How To Change Oil & Filter on Harley Sportster!

Поділитися
Вставка
  • Опубліковано 19 сер 2024
  • How to change your oil on a Harley Sportster 48!* (our model is a 2010, but most recent Sportsters are very similar.) Recently bought this bike used, and wasn't sure when the last service was. So bought some oil and gave her some fresh fluids!
    ► PARTS USED:
    Oil: 3 Quarts are needed for engine (2) and transmission (1,) although would recommend buying 4 just in case you need a little extra. Amsoil isn't available online. Find a dealer in your area if you want to go with Amsoil. Otherwise, here are some alternative 20w50 oils available to order.
    Mobile 1 20W-50 V-Twin Synthetic: amzn.to/2zE6E4U
    Valvoline 20W-50 SynPower Full Synthetic: amzn.to/2CgvmuQ
    Castrol Power1 V-Twin 20W-50 Synthetic: amzn.to/2C1EQxu
    Sportster Oil Filter: amzn.to/2DmI5f4
    Oil Filter Wrench: amzn.to/2Cg60jq
    Oil Filter Pliers: amzn.to/2zDhOaa
    Flo Funnel: amzn.to/2xVmjQI
    Regular Funnels: amzn.to/2xU2kBV
    Catch Pan: amzn.to/2xjEcpt
    Shop Towels: amzn.to/2wCCx0V
    Foil Sheets: amzn.to/2CbTnpE
    As always, thanks for tuning in! Be sure to Like / Comment / Subscribe!
    Till next time, ride safe out there, & stay vigilant!
    Deuces!

    ► BIKES:
    2017 Harley Low Rider S (FXDLS)
    2015 Honda CBR1000RR
    2010 Harley 48 Sportster
    1987 Honda Rebel 250

    ► LINKS:
    Behind the Scenes!
    • / blockheadmoto
    My Gear @ Amazon:
    • www.Amazon.com...
    Blockhead Merch:
    • bit.ly/Shophead
    Social Medias:
    • Instagram - bit.ly/BlokHdIn...
    • Facebook - bit.ly/BlokHdFa...
    • Twitter - bit.ly/BlokHdTw...

    ► MAIL:
    Blockhead Moto
    PO Box 18
    Windermere, FL 34786

    Music:
    Tonez & Re-C - Kyoto: bit.ly/2o95eOL
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0: bit.ly/2o941XS
    Music provided by AL: bit.ly/2o9aKkH
    ________
    *DISCLAIMER:
    This is only a guide, and not meant to be taken as the only means of completing this job. I assume no responsibility and am not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource.

КОМЕНТАРІ • 152

  • @ronniecurnutt4309
    @ronniecurnutt4309 6 років тому +14

    After I put clean oil back in I pull the drain plug just a sec to rid the system of any possible air pockets . Than top off once more with like amount.

  • @Alamina5.0
    @Alamina5.0 6 років тому +8

    The fact the dealer charges a lot to do this is outstanding how people can't or don't know how to do it themselves but doing it yourself

    • @rebel_ltz
      @rebel_ltz 6 років тому +6

      Or maybe.... maybe you CAN do it but don't want to void your warranty with not attending Service in the first 2 years.

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      They actually threw in a service plan when I bought the Low Rider S, so I haven't changed my own oil on that thing. It's just easier to take it up the street to Harley and let them do it. Since it's already included. But, whenever that plan runs out, you bet I'll be doing my own service on that, too :)

    • @justhere2travel
      @justhere2travel 6 років тому +1

      Yeah, I probably won't go to the same dealer. Finding out after about my tank being 2.1 gallons. Bring up the fact that I'd like to drive to DC without filling up a ton of times, how I want the manual that actually covers repairs and not the "owners" manual. This last one I brought up at least six times. Still didn't get it. I should have let that been the final straw, but my bike is great. I love it and I can't believe it's already time to change the oil. I be damned if I'm paying 400+ for a 15-20 min job.

  • @uglyboysmallz3845
    @uglyboysmallz3845 6 років тому +9

    If you don’t mind me giving you a couple tips on your oil change, here they are. Oil both sides of the gasket on your oil filter, and most importantly pop open your oil drain for a second; there will be an air bubble that needs to be removed. It can cause cavitation in the oil pump causing a drop in pressure. Hope that was helpful.

    • @boomerguy9935
      @boomerguy9935 4 роки тому +2

      I do the same thing but I use a separate clean container to catch that tiny bit for use later. It's clean oil, after all. After starting the motor and letting it run for a few minutes, I check it to make sure I didn't over fill it. If so, I can suction it out with a handmade pump from a Soft Soap bottle and pump it into the same clean container. Then I check the oil again after a nice ride. It may be overkill, but it makes me feel warm and fuzzy all over.

    • @tonytravert9944
      @tonytravert9944 Рік тому +1

      Is this after you topped up the oil tank with the new oil and before taking it out?

  • @geoffozevans4500
    @geoffozevans4500 6 років тому +2

    A very professional oil change , I have one of those gadgets that go under the oil filter to catch any oil, about 20bucks. Check the oil again after you've ridden around , nothing wrong with being OCD. You're doing a great job with your vlogs, always interesting & varied. Nothing but rain here in Wales, I have had my Fatboy Lo Special since Feb, bought it new & only dome 600 miles cos it's shit weather here nearly every day 🖒😎

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      For sure, went and rode the bike after and checked when I got back, oil level was great. Glad you're enjoying the vlogs, thanks for the support! Hope you get some better weather there.

  • @joshuaherrold2470
    @joshuaherrold2470 6 років тому +1

    Gata love Amsoil man, my Dad n I have been dealers for a few years now. Used it in my cobalt for almost all of the 215,000 miles on my ‘10 cobalt, still runs like a top! Works great for drilling holes in steel too 🤣

  • @dandyrides7257
    @dandyrides7257 6 років тому +8

    Awesome - thanks for a super helpful video! I have a Forty-Eight myself and I was planning on doing an oil change soon. This came at just the right time! ✌️

  • @joeygemini6390
    @joeygemini6390 2 роки тому +1

    Puppy house training pee pads work great for catching and soaking up all the oil when removing the oil filter. I also use them when changing oil filter in my airplane which is also horizontal and fine threaded. Wrap the p pad around the oil filter before unscrewing filter. Use painter's tape to help hold it in place if necessary.

  • @uglyboysmallz3845
    @uglyboysmallz3845 4 роки тому +3

    Amsoil never ceases to amaze me. Have you tried their Primary fluid? Noticeable difference in clutch performance and shifting.

  • @jimmansi1187
    @jimmansi1187 6 років тому +7

    Nicely done! I use cardboard but gonna try the foil, nice tip.

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      Thank you! Yeah the foil works pretty well since it's a bit more malleable than cardboard, but I've used cardboard before as well :)

  • @raymondgarafano8604
    @raymondgarafano8604 Рік тому

    Nice job! always nice to do ur own oil changes, I do an oil change on my 91 Sporty around 2500
    miles, the filter also. Then I service the air cleaner an S&S sideways teardrop. check plugs and
    gap if needed as well, between 38 and 42 thousandths.

  • @JustGioFL
    @JustGioFL 6 років тому +26

    I'm mad you didn't include a link to the foil..

    • @bobsaget3874
      @bobsaget3874 4 роки тому +3

      you're supposed to use the orange harley davidson foil. about $20 per sheet.

  • @edtuller2537
    @edtuller2537 6 років тому +4

    I am a Amsoil Dealer You are Right you are using the best oil on the market.

  • @colegraf7074
    @colegraf7074 Рік тому

    Just changed my oil for the first time, thanks blockhead for making this an easier process

  • @wireworks616
    @wireworks616 5 років тому +5

    I like the aluminum foil trick, gonna try it on my sporty.

  • @outdoorsnomad
    @outdoorsnomad 6 років тому +11

    Love the foil trick

    • @marcinkucharski9609
      @marcinkucharski9609 4 роки тому

      Outdoorsnomad 03 You can use plastic bottle cut in half ;)

  • @JasonByers77
    @JasonByers77 4 роки тому

    That foil trick put a song in my head...
    "Real men of genius!"

  • @dustinhxc
    @dustinhxc 6 років тому +1

    “Cheers!” Haha hey man, thanks for the helpful and well done video! This helps a lot, very clean methods. Going to get those tools for sure when I get my first Harley.

  • @douglasebrandeljr4754
    @douglasebrandeljr4754 6 років тому

    on your oil filter take and find a funnel that will fit around your filter with the big open end and cut it in half and you have a good filter tool that allows drainage in to the drip pan

  • @finneyman
    @finneyman 6 років тому +1

    Think I told you before. I work in an oil lab and test oil for metals and contamination. Maybe I’ll send you some sample kits so I can test for you. Let me know

  • @BeardedWrenchh
    @BeardedWrenchh 6 років тому +1

    check out a product called Form-A-Funnel, it looks like a green mat but its formable like the gear ties, got it off my snap-on truck but you can buy it at the store, instead of using foil everytime and having to throw it away afterwards, you can clean this with brake clean and re-use it every time

  • @nickblack3863
    @nickblack3863 6 років тому

    Awesome funnel, just ordered one now. Thanks for the reccomendation

  • @raymondgarafano8604
    @raymondgarafano8604 Рік тому

    It is very nice you do these vids, 2 thumbs up. Have u ever had to install a new tail-lite on an
    older sporty like a 91 they use studs and a rather funky washer to grip the studs.

  • @WolverineX1996
    @WolverineX1996 6 років тому +2

    Hey blockhead, always a great video, just a little piece of advice open the oil pan cap after the drain plug in this way not only you avoid hot oil on your hand but in this way you can see if your gaskets and everything is in good shape and is not letting air in. Hope to se mrs blockhead riding that Harley soon. Deuces bro

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      Good advice! I'll do this next time :)

  • @TheRenatoWilly
    @TheRenatoWilly 5 років тому +1

    2.8qts fluid capacity

  • @paterpull
    @paterpull 5 років тому +2

    Would it be a good idea to leave the foil in place until the new filter is installed? Just to keep any of the new primer oil from spilling when attaching the new filter? Thanks.

  • @mpghow
    @mpghow 5 років тому

    good vid, just 1 add comment, i punch a small hole on the end of filter with a small hole punch 1st at 18:00 hrs (oil starts comming out slow) then 12:00 hrs (lets air in oil gushes out fast) and empty the filter on the tin foil then when u remove the filter ...no drip !

  • @OGDMaco
    @OGDMaco 5 років тому

    Hey man UK rider here doing my full bike test this year came across your videos fell in love with the 883. I'm set to get my own next feb so watching all your videos of the 883 and ones like this are really helpefull. Do you have a playlist for maintenance for the 883? I always worry about overfilling my oil gonna get the LCD display oil read aha

  • @daveburridge9672
    @daveburridge9672 4 роки тому

    excellent, mellow, good teaching. a little better lighting would let us in even more

  • @AudioArcturia
    @AudioArcturia 4 роки тому

    Just a quick tidbit, dunno if anyone has been told otherwise: but it's been shared with me that it's recommended you use conventional motor oil in evolution engines for the sake of longevity. 🤷 Do with that what you will

  • @volkah8279
    @volkah8279 6 років тому +1

    Thanks from Germany

  • @r.savage1283
    @r.savage1283 6 років тому

    Hey that oil funnel ships to canada. Going to order one. Great little tool

  • @qkamel2
    @qkamel2 2 роки тому

    Gracias por el video man everything well explained! 👌🏽✌🏼

  • @erikestrada275
    @erikestrada275 4 місяці тому

    Why every time when i change the oil in my 2013 harley davidson sporster 1200 is only takes 1 1/2 quart and if i put more it starts leaking when raidig and if i stop and park it keep leaking?

  • @QuickShifter
    @QuickShifter 6 років тому

    Hello BH! I really wanted to thank you for all those videos about "how to" . Almost found all answers from you :)
    There is a question about my XL1200X 2011mod, my friend said to me that i have to change transmission oil. with every oil change. is it true? or how? :D

  • @Hoa-cao
    @Hoa-cao Місяць тому

    so only 2 quart for the oil change right? i just got 2019 harley 48.

  • @DTDRIDER
    @DTDRIDER 6 років тому +1

    Clean looking sportster

  • @BerthaAdv
    @BerthaAdv 6 років тому

    Thanks. I like the foil trick. Are you going to do one on the transmission fluid change. Would like to you tricks on that too.

  • @bro-dirt680
    @bro-dirt680 6 років тому

    Seen that funnel and it just reminded me that I never used it for a oil funnel. It was my beer bong.

  • @RjsEpicAdventures
    @RjsEpicAdventures 6 років тому +1

    very informative and helpful should have specified year ad model of sportster , like 48 or iron

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      Model and year of Sportster is in the description, and mentioned in the video.

  • @chrisphilhower6029
    @chrisphilhower6029 4 роки тому

    Did you use a filter without a Drain Back Valve? I have a 2018 Custom 1200. I use a Bosch 3330 Auto Filter. With the Drain back valve. Never had any issues. Just under 8k Miles in 2 years. What I do is, Use an open bottle to refill the filter. 2 full qt in the tank. Start and check. I have the Harley Temp dipstick. Thing is a PIA to check the level on. Stick part is so much shorter than stock.

  • @geoffozevans4500
    @geoffozevans4500 6 років тому +1

    Thanks Block

  • @dwightraine9686
    @dwightraine9686 4 роки тому

    The foil is a good idea never use that before I’m going to try it

  • @jonny2cool4uz1
    @jonny2cool4uz1 6 років тому +8

    Wassup blockhead are you going to do a primary/transmission fluid change?

    • @BlockheadMoto
      @BlockheadMoto  6 років тому +2

      Yup, I'll be doing that soon! I got lazy and didn't end up doing it, haha

    • @jonny2cool4uz1
      @jonny2cool4uz1 6 років тому

      BLOCKHEAD nice looking forward to it!

    • @justhere2travel
      @justhere2travel 6 років тому

      How soon is soon good sir?

    • @Anonymou5gh0st
      @Anonymou5gh0st 5 років тому

      Did it ever happen ? My iron just hit 1K & my dealership wants me to pay $500 for the service I rather do the fluids myself and just have them do the inspection

  • @MrJruta
    @MrJruta 3 роки тому

    Dumb question but when checking dipstick do you push the pop-up down? Or just screw it in without pushing down to check? Thanks

  • @FarmerTheOG
    @FarmerTheOG 6 років тому +2

    How are you using a rear stand on a harley? Every place ive asked about them said its not possible

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      It was a tight damn fit b/c it was so wide, probably nearly reached the limits of the rear stand, but it worked! haha

  • @castmastersoutdoors7762
    @castmastersoutdoors7762 2 роки тому

    Had bought a new 2014 sporster iron 883 and after 360 miles it sat till last week ...my oil smells like gas However looks fine.. Any suggestions what I should do before I crank it up for the first time?

  • @m.j.vazquez4720
    @m.j.vazquez4720 2 роки тому

    is this normal The manual says refill 3.6 qts for my 05 Harley 1200 sportster custom but it looked pretty full after about 2.5 and the oil light turned off (turns back on when I turn key and off after i hit power)

  • @dragonmarx3028
    @dragonmarx3028 3 роки тому

    Thanks for the tricks and info. Does the 883 have an inside engine debris magnet ? To collect the fine particles inside the engine. Thanks

  • @arno2421
    @arno2421 6 років тому +1

    Thanks! I suppose it's the same for the iron.

    • @BlockheadMoto
      @BlockheadMoto  6 років тому +1

      Pretty much identical. Check your manual for oil capacity.

    • @arno2421
      @arno2421 6 років тому

      BLOCKHEAD Thanks dude, good job. Ride for me under the sun of Florida... Here in Brittany France, too much rain. Peace ✌

  • @darionducharme
    @darionducharme 3 роки тому

    Why did my oil filter come with an O-ring? Is the O-ring necessary on the 1200 sportster 2010?

  • @ironkid8836
    @ironkid8836 3 роки тому +1

    tin foil handy idea cheers

  • @Loss8131
    @Loss8131 Рік тому

    do you have to change the oil filter everytime you do a oil change ?

  • @luisbiascochea2829
    @luisbiascochea2829 6 років тому +1

    gm, blockhead thank you for the demo, are all the drain plugs in the same general area??

  • @marquezo
    @marquezo 3 роки тому

    My oil change kit came with two smaller o rings. Where do these go ? I ride a 2015 iron883

  • @grzegorz4830
    @grzegorz4830 3 роки тому

    Hi. I really like your materials 👌🎥🏍️🤘 Could you please give me an answer ... how often do you check the oil level in the iron 883 sporster and whether you add oil or is it enough for you from change to change without refilling. Regards from Poland 🇵🇱🤘🏍️

  • @dthoma128
    @dthoma128 6 років тому

    Cool ... like the foil tip as well ... sharp seat on that bike ... what is the brand name on that?

  • @MrPAULONEAL
    @MrPAULONEAL 5 років тому

    Do all Harley Davidson motorcycles use the same filter?

  • @Dawgs241
    @Dawgs241 5 років тому

    Thanks for the vid!! I just purchased a 98 Harley Sportster 1200 and going to change the fluids. I purchased the Mobile 1 oil you have linked, can that be used for the engine and also primary oil? It says it on bottle, however the dude at Harley dealership said I have to use specific primary oil.

  • @mostaza1464
    @mostaza1464 4 роки тому

    Can you please share the info for the red jack/stand?

  • @whiteribbonman1
    @whiteribbonman1 5 років тому

    How does one know which hose to disconnect for draining the oil tank? I am about fed up and just take it to a Harley-Davidson shop and let them do it. No one and I mean no one, shows how you learn which hose is the correct one.

  • @r.savage1283
    @r.savage1283 6 років тому

    Hey what kind of bike stand is that? Can you do a video on that bike stand? Definitely a better approach than on the ground.

  • @MrCcarter7
    @MrCcarter7 6 років тому +1

    Thanks for posting the video man. God bless in Jesus' name!

  • @poweredbymuiline1086
    @poweredbymuiline1086 Рік тому

    Hello, what tyre size is on your Harley?

  • @takodah12
    @takodah12 3 роки тому

    Can anyone give me advice on trying to find the drain plug hose on my 88 sportsrer 1200? I have stared at the exact spot where the hose is supposed to be but it's not there. I pulled a hose towards the front right which I thought it was but hardly any oil came out.

  • @fernandohaza1765
    @fernandohaza1765 5 років тому

    What do you think about Valvoline 20w50 4 stroke for oil change?

  • @christosrenner6867
    @christosrenner6867 6 років тому

    What kind of camera and mount are you using for this video? Love it!!!

  • @bro-dirt680
    @bro-dirt680 6 років тому

    Looking for video on transmission fluid change. Did you do this? I can't find video?

  • @RandallTheBackRoadRider
    @RandallTheBackRoadRider 6 років тому

    Like the foil trick

  • @dylang4249
    @dylang4249 6 років тому +1

    What camera do you use? And also how does your mic work? Do you use the camera mic? Or have another in the helmet?

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      In this video, it's a GoPro with a mic adapter and using an external Sony ECM lav mic.

  • @enriqueivramirezlopez5035
    @enriqueivramirezlopez5035 4 роки тому

    What size
    rim/wheel you running front?

  • @msec2000
    @msec2000 5 років тому

    Good tip for the alluminum foil, but, why did you remove it before install New filter

    • @boomerguy9935
      @boomerguy9935 4 роки тому

      There's no need to keep the foil in place. There is a chance you can catch the edge of it when screwing on the new filter. Also, with the foil gone, you can wipe any oil off the bike from the old filter. Extra note: priming the new filter with oil helps prevent a dry start. I usually fill mine all the way up to let it soak into the media before screwing the filter on, then I pour the standing oil back into the new bottle. The filter won't be full but it won't be at the top where it can spill out when screwing on the filter.

    • @paulbunyun-xi9by
      @paulbunyun-xi9by 4 роки тому

      all that work with the foal than he ends up spilling when pouring oil into filter defeating the whole purpose! oh well next time

  • @ltz6506
    @ltz6506 6 років тому

    Nice video.I have problems with the start of my iron. already change fuses, charge the battery, and new spark plugs and nothing. I have the suspicion of relays. I do not know if you can help a brother in disgrace.

    • @joshualorimer5639
      @joshualorimer5639 6 років тому

      check your fuel filter and air filter. an engine choked by either of those will cause hard starts.

    • @ltz6506
      @ltz6506 6 років тому

      Joshua Lorimer ok thanks, I'll try too a friend says he can see false ground contact

  • @lloydtwibill7930
    @lloydtwibill7930 6 років тому

    Have you got a link to the foil?

  • @whatsgood3810
    @whatsgood3810 6 років тому

    When/How often should you change your oil? Just got a 2016 883 with 3000 miles on it - not sure if its been serviced yet.

    • @BlockheadMoto
      @BlockheadMoto  6 років тому

      If you don't have the service records, check the oil. If it's really dark, probably needs to be changed. The oil that I drained from this bike was actually in really good shape, but I changed it anyways b/c I wanted it to be fresh, and I wasn't sure how long the oil had been setting in this bike / when it was last changed.

  • @Covol8454
    @Covol8454 5 років тому

    What lift are you using?

  • @jbgaither308
    @jbgaither308 5 років тому

    What seat are you running?

  • @peteshelby21
    @peteshelby21 3 роки тому

    Aluminum Foil trick is clutch as fuck

  • @HobbsMF
    @HobbsMF 4 роки тому

    My man, what rear stand are you using?

  • @ironheadhooligan
    @ironheadhooligan 6 років тому +1

    Yo yo blkhed...wasaaappp hammie ✌

  • @Mcmccart
    @Mcmccart 5 років тому

    Just changed oil on 1200c - manual calls for 2 quarts but now no oil on dipstick after change ... wtf

  • @SkidPig
    @SkidPig 6 років тому

    Dam I wish I knew about that foil tip years ago ha ha

  • @mrhoya14
    @mrhoya14 4 роки тому

    Every how many miles do i need an oil change?

    • @ruskimofia
      @ruskimofia 4 роки тому

      mrhoya14 my iron 883, and basically every other sportster, says that on the first 1,000/1,500 miles and then every 5,000 miles (or every year if you live up north and don’t ride year round)

  • @chanseortzman9467
    @chanseortzman9467 5 років тому

    How many miles between oil changes?

  • @1moregamerboy718
    @1moregamerboy718 6 років тому

    Hey blockhead. Putting the comment here but it’s about the fxdls. I got the burly slammer shocks too and was just checking my oil levels. Have you thought about the dipstick level on the slammer shocks and is it a true reading now ?

  • @btafur973
    @btafur973 5 років тому

    How Manny quarts for sporster 883 2017???

  • @mrhoya14
    @mrhoya14 5 років тому

    Which oil do you recommend? I have a 17 sportster 48

  • @adamak47miller90
    @adamak47miller90 6 років тому

    I always fill my filter with oil before I install

  • @matthewclifford7504
    @matthewclifford7504 6 років тому

    Harbor Freight lift?

    • @r.savage1283
      @r.savage1283 6 років тому

      Matthew Clifford yeah what bike stand lift is that?

  • @SuperBushmaster223
    @SuperBushmaster223 5 років тому

    Cut a 2 liter plastic bottle in half to catch oil drip from filter.

  • @flyingzebra311
    @flyingzebra311 6 років тому

    Mobil 1

  • @calimilk1113
    @calimilk1113 2 роки тому

    Holds 3.0 quarts !!!!

  • @Tristan_Heberlein
    @Tristan_Heberlein Рік тому

    Sweet idea with the foil. Now I don't have to bitch and cuss every time the oil drips all over everything underneath the filter.

  • @stevesherlock5334
    @stevesherlock5334 3 роки тому

    3 qts my man

  • @luisbiascochea2829
    @luisbiascochea2829 6 років тому +2

    You definitely need to have a bigger garage...lol

  • @Jason22Douce
    @Jason22Douce 6 років тому +3

    🤘 Blockheads unite 🤘

    • @reece_bhc1056
      @reece_bhc1056 6 років тому

      Jason Doucette ✊

    • @BlockheadMoto
      @BlockheadMoto  6 років тому +1

      Blockheaaads, assemble! (said like in Anchorman followed by blowing a conch shell)

  • @hectorramirez1808
    @hectorramirez1808 2 роки тому

    Pretty simple. These idiots at the Harley dealership are asking over 400 dollars for an oil change.

  • @stevesherlock5334
    @stevesherlock5334 3 роки тому

    When my funnel came in the mail my boys thought it was a beer bong. Now my Harley can’t run a straight line..

  • @mopar21
    @mopar21 6 років тому +2

    Mobil V Twin is far better. Check independent analysis. Number one ingredient in Amsoil is Koolaid.

    • @BaggerBro
      @BaggerBro 6 років тому

      Zach false.

    • @mopar21
      @mopar21 6 років тому +1

      nobama run what you want. That's why I don't buy used vehicles.

    • @BaggerBro
      @BaggerBro 6 років тому

      Check out various lab tests, amsoil destroys Mobil everytime. All 4 of my vehicles have Amsoil. Works great!

    • @georgeartistapt
      @georgeartistapt 6 років тому +1

      Been using Mobil 1 on my cars , bikes , trucks , suvs for over 20 years , not saying that Amsoil is a bad product but Mobil 1 is superb

    • @BlockheadMoto
      @BlockheadMoto  6 років тому +1

      Credibility lost when you said #1 ingredient is Koolaid. I love Koolaid. OH YEAAAAH!

  • @hunterbonilla9956
    @hunterbonilla9956 6 років тому +1

    hey blockhead!!!

  • @preapsavage3858
    @preapsavage3858 6 років тому

    Any plans on bikini fairings ?

    • @BlockheadMoto
      @BlockheadMoto  6 років тому +1

      Hmmm don't believe so but Ms Block is calling the shots :)