Drew, as someone that’s watched you this entire journey. Fella you’ve come a long way. Keep up the great content & may the most high continuously bless you on the journey!
Great job Drew, using delay on the closer mics to match 2nd mic was an excellent reminder! I am just starting back up after many years away. Very Helpful
Oh, just BTW - calling a polarity reversal switch "phase" is totally cool. 180° phase change is a reversal. Lots of gear refer to this function as "phase" Also, delay is not "phase" Delay changes the phase of each component of a signal differently, depending on the frequency. Really, its a small point. Your exposition skills are excellent. Well done. I'll check out your other vids. I'm thinking of cashing out my StudioLive 32.4.2AI for an X32
I’ve actually been torn between the x32 and the new studiolive, but I’d have to go with a smaller studiolive to get the same price range. Anything in particular that would keep you from getting the newer version of studiolive?
Drew, on the X32 is there a way of putting DCA's on a Bus?. eg. using a post fader bus for a Stream feed to a Matix, then to the Exention card O/P. Looking at putting all the Vocals on that bus through a DCA (+ all instruments through another DCA)..
Hello all... I'm reaching out because I have a problem. One of my cats thought that my X32 Compact fader "knobs" were a toy. I have 3 missing. Is there a place to buy replacement fader knobs? Please help !
You are the most talented, individual! Looking at your camera with your, right EYE and your monitor, with your left, EYE. How do you do that? Talk about stereo vision! That's excellent!
I would like you to help me. I bought your pack of scenes for Behring x32 in January, but I see that it is configured only for the x32 model with 16 outputs, and I have a compact with 8 outputs. I would like you to help me try to configure it. it's for a church in Connecticut. I have tried to do the configuration but I can't
Hello, I have a question can I use a Behringer S16 stagebox with a Yamaha TF3 digital mixer thru a Dante NY64-D expansion card output port ? That works. Thank you
Great Job..... I've A question about While Patching the Two mic's for the snare-drum Do i Have to apply the polarity Button to both Microphones for it to sound/ be In phase?
No, only one. Can be either one. Try it both ways to see which gives you a more suitable sound. I usually reverse the bottom, but sometimes the top is the better one to reverse.
BEWARE NOTE: Behringer has a major problem with its products documentation manuals in them using proprietary PDF X software, just has a nice long email session with them and this is my findings response: I believe the problem is you are using a proprietary PDF X software and it is a password protected doc. Most all pdf docs will open in acrobat pro and have full edit, but yours does not and has a password protection on if. I do not use any other PDF creation software, do to them not having the functions that Adobe Acrobat has and does such as copy, scan and insert functions that all others do not have. SO whoever created this manual in PDF X software, password protected this and all your other PDF docs created by it. SO yes your downloads for manuals are password protected by its creators. In conclusion this is a major problem, so no one can copy text or pics to create quick reference user notes to learn on using behringer products.
LOL that phase invert controversy strikes back again. "Manufacturers do it wrong for whole history of sound" 🤣 you say they label it wrong, but then talk about switching the polarity of wires. What happens, when you switch polarity of wires, when phantom is on? Do you know that? Sorry for that, but this is too controverse... 🙂 phase invert is right.
Your channel is an answer to prayer. Literally.
Drew, as someone that’s watched you this entire journey. Fella you’ve come a long way. Keep up the great content & may the most high continuously bless you on the journey!
Great to see you back on the 32 Drew Looking forward to future videos Thanks
Because of you I bought this mixer. And I can’t explain how happy I am with this mixer!
Thank you Drew, your videos get better with each one you do . So well done and easy to follow. You are a blessing to our church team .
Thank you! You're more than a friend, You're a father!❤
Great job Drew, using delay on the closer mics to match 2nd mic was an excellent reminder! I am just starting back up after many years away. Very Helpful
Your videos have been so helpful throughout the years!
Subscribed and joined because I really want to get so much better at the X32. Thanks so much for this video!
Thank you so much for your support, Sean! Glad to be part of your journey!
Drew, you're the best!
Oh, just BTW - calling a polarity reversal switch "phase" is totally cool. 180° phase change is a reversal. Lots of gear refer to this function as "phase" Also, delay is not "phase" Delay changes the phase of each component of a signal differently, depending on the frequency. Really, its a small point. Your exposition skills are excellent. Well done. I'll check out your other vids. I'm thinking of cashing out my StudioLive 32.4.2AI for an X32
I’ve actually been torn between the x32 and the new studiolive, but I’d have to go with a smaller studiolive to get the same price range. Anything in particular that would keep you from getting the newer version of studiolive?
remind me never to hire you
Loving all the posts! So helpful. This is quality content.
Thank you very much for this super didactic video! I've been using the X32 for years, and still I learnt a lot. Thanks again!
I really appreciate your explanation. It really helped me alot.
Drew, on the X32 is there a way of putting DCA's on a Bus?. eg. using a post fader bus for a Stream feed to a Matix, then to the Exention card O/P. Looking at putting all the Vocals on that bus through a DCA (+ all instruments through another DCA)..
Amazing video you have made with full details...
God bless you for your good works
Man you are truly a Blessing
Drew, phase and polarity are synonymous in this context.
Thanks.
Genius!
Hello all... I'm reaching out because I have a problem. One of my cats thought that my X32 Compact fader "knobs" were a toy. I have 3 missing. Is there a place to buy replacement fader knobs? Please help !
You are the most talented, individual! Looking at your camera with your, right EYE and your monitor, with your left, EYE. How do you do that? Talk about stereo vision! That's excellent!
Thanks Drew! Looking forward to more videos. BTW I did send you an email the other day, hope you got it.
First step. Delays😂. Good vid. But afew advance explanations for me. A true beginner.
I would like you to help me. I bought your pack of scenes for Behring x32 in January, but I see that it is configured only for the x32 model with 16 outputs, and I have a compact with 8 outputs. I would like you to help me try to configure it. it's for a church in Connecticut. I have tried to do the configuration but I can't
Is it nessesary to use drive rack with x32
Hello, I have a question can I use a Behringer S16 stagebox with a Yamaha TF3 digital mixer thru a Dante NY64-D expansion card output port ? That works. Thank you
no
pls teach us how to setup sub woofers in cardoid arrangement
Great Job..... I've A question about While Patching the Two mic's for the snare-drum Do i Have to apply the polarity Button to both Microphones for it to sound/ be In phase?
No, only one. Can be either one. Try it both ways to see which gives you a more suitable sound. I usually reverse the bottom, but sometimes the top is the better one to reverse.
@@66fitton Thanks You are my best tutor
🙌🏻🙏🏻🔥👏🏻👏🏻👏🏻🇧🇷
Hi , how can i contact you ?
Great stuff!! Hi pass not low cut…. Lol
😚😚😚😚😚
First 👀
My board
Polarity pfff *its PHASE*
First step to operating an x32 is to sell it get a better console. Haha.
@ Bear Klenda Like...which one is better, if not best?
BEWARE NOTE: Behringer has a major problem with its products documentation manuals in them using proprietary PDF X software, just has a nice long email session with them and this is my findings response: I believe the problem is you are using a proprietary PDF X software and it is a password protected doc. Most all pdf docs will open in acrobat pro and have full edit, but yours does not and has a password protection on if. I do not use any other PDF creation software, do to them not having the functions that Adobe Acrobat has and does such as copy, scan and insert functions that all others do not have. SO whoever created this manual in PDF X software, password protected this and all your other PDF docs created by it. SO yes your downloads for manuals are password protected by its creators. In conclusion this is a major problem, so no one can copy text or pics to create quick reference user notes to learn on using behringer products.
Ever heard of screenshots? lol
LOL that phase invert controversy strikes back again. "Manufacturers do it wrong for whole history of sound" 🤣 you say they label it wrong, but then talk about switching the polarity of wires. What happens, when you switch polarity of wires, when phantom is on? Do you know that? Sorry for that, but this is too controverse... 🙂 phase invert is right.
Ничего динамическому микрофону не будет если включить +48 вольт, враньё.