i did some research, you may need to check your OBD2 port pins. apparently there's 12 and 16 pins for OBD2. the plug may fit but the pins may not connect correctly. An adapter may be needed
@@carbitstv same here, i did some research too and say something about protocol obd 2 what i know is cars until 96 have obd and from 96 too 2024 have obd 2, i really apreciated your comment and i will look to see how many slippers i have in the obd2 socket
If you have fewer pins in the plug on the car than you have on the plug of the comes to display, it may not work. Its a bit difficult to find the right adapter. I will really like to find a video where this product works on matiz.
hindi ko pa po na try (wala kasi may diesel car sa lugar namin) pero alam ko as long as may OBD port yung sasakyan, it should work. some parts ng gauges may not work correctly if not applicable sa sasakyan.
@@ecguide7181 yup. pero usually sa tpms kahit on makina basta wala movement, namamatay. itong gauge naman after i off ng engine dun lng din mag off, pero while uaing the car, always on yan :)
@@rcsunga8867 this video should tell you how, but if you want another video you can watch my original install video here: ua-cam.com/video/Nh1wobVrEuY/v-deo.html
Get it here: shopee.ph/product/71202037/11301547150?smtt=0.374387705-1665905849.9
es compatible con suzuki S-presso?
yes, as long as it has OBD2 port
I have same product but dont work on daewoo matiz 2008 and dont know why, whats wrong ??
i did some research, you may need to check your OBD2 port pins. apparently there's 12 and 16 pins for OBD2. the plug may fit but the pins may not connect correctly. An adapter may be needed
@@carbitstv same here, i did some research too and say something about protocol obd 2 what i know is cars until 96 have obd and from 96 too 2024 have obd 2, i really apreciated your comment and i will look to see how many slippers i have in the obd2 socket
If you have fewer pins in the plug on the car than you have on the plug of the comes to display, it may not work. Its a bit difficult to find the right adapter. I will really like to find a video where this product works on matiz.
Subscribing. Thanks for the info.
thanks po 😊🙏
Not working in 2009 fortuner
thanks for the info. Helpful for Fortuner owners
thanks bro!
welcome pp
boss bakit ganun ok naman dati pero ngayon nawala yung reading sa rpm and ect, any solution?
try reseting po, sa may option meron reset
Boss pwede po ba sya sa civic 90s na obd1 pero may adaptor napo ako na nabili from obd1 to obd2 pwede po kaya?
i suggest sa shop kayo magpalagay, designed sya sa OBD2 baka kasi with the converter, hindi sya magfunction ng maayos. pero sana po gumana :)
Pwedi po ba Yan SA diesel
hindi ko pa po na try (wala kasi may diesel car sa lugar namin) pero alam ko as long as may OBD port yung sasakyan, it should work. some parts ng gauges may not work correctly if not applicable sa sasakyan.
hello sir noob lang po. Saan po banda naka pwesto ung obd connector ng Brio? di po kasi makita sa video. Thanks!
just right above the gas pedal po... malapit sa center
Hi tumutunog ba ung sa rpm limit nya kapag need na mag shift ng gear ?
hindi ko po na experience since CVT po unit ko, pero nag aalarm if ma reach yung set na max speedometer
Paano niyo po tinanggal ang A pillar?
naka clip lmg po, kaya hilahin or mas maganda if may pang sikwat kayo (prying tool)
@carbitstv puwede kaya yung prying tool na kasama sa ng OBD2?
@carbitstv yan din po kasi inorder namin ask ko lang may water tempt, oil tempt po ba siya?
@randolfabad759 yes meron po. Pati CVT oil temp meron din
@@carbitstv thank you, sana dumating na agad at maikabit
Sir, P6 ba ang latest..ty
sa ganitong category yes yan na po
Does it turn off kapag pinatay makina or always on sya since nasa OBD port?
automatic Off po pag patay din makina. may 30secs delay lng
thanks so parang motion sensor din ata para maturn off, same sa TPMS. Thanks po.
@@ecguide7181 yup. pero usually sa tpms kahit on makina basta wala movement, namamatay. itong gauge naman after i off ng engine dun lng din mag off, pero while uaing the car, always on yan :)
Bossing compatible po ba sya s honda 2000 (SIR) model? Thanks ng marami.
most cars naman po basta may OBD2 port, mag work po sya. unles stated sa description nila if meron specific cars na hindi sya mag work
Sir Dan meron din po yan CVT temperature?
Coolant temp lang po sa pagkakaalam ko pero check ko na rin...
Sir dan di nmn po ba sagabal sa view pag nag dadrive po okay lang po ba siya?
Hindi naman po, kapantay sya halos ng A pillar
Hi, Sir. Query lang po, (in the long term) hindi po kaya ito makaka-damage sa ECU since constantly naka-plug siya sa OBD2 port? Thanks
its not, technically its just a reader. It displays what it reads from ECU
@@carbitstv Thank you po. Just subscribed to your channel. Daming informative contents for cars. More power po
@@tianzzz98 Thank you po sobra! God bless po 😊🙏
Need ko ba idisconnect ung cable pag ka nakapark ung car? Baka ksi ma discharge ung battery.
Auto off naman po sya pag patay na engine.
@@carbitstvpaano po install Pls
@@rcsunga8867 this video should tell you how, but if you want another video you can watch my original install video here: ua-cam.com/video/Nh1wobVrEuY/v-deo.html
@@rcsunga8867 locate nyo lng po OBD2 port nyo, plug and play na po sya dun, diskarte na lng sa pagtatago ng wires
Sir dan pede po makahingi ng link netong budol na ito heheje
Dito po sir: shopee.ph/product/71202037/11301547150?smtt=0.374387705-1665905849.9