EJ1 Civic Single Stage VIPER RED Paint job !
Вставка
- Опубліковано 8 лют 2025
- BUILT2DRIVE MERCH ARE BACK ! !
built2drive.bi...
Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
STREET2TRACK
www.street2trac...
REDZONERACE
www.redzonerace...
/ redzonedb8
/ redzonerace
ACTION CLUTCH 15% OFF DISCOUNT CODE : STATIC
actionclutch.com/
/ actionclutch
CJSWIRING
www.cjs-wiring...
/ c_zapien
KTUNED
/ ktuned
k-tuned.3dcarts...
Y&S Lexan
/ y_s_lexan
JBTUNED
www.jbtuned.com/
/ jbtuned
Put house painter plastic over the ceiling of the garage, spray water on your cement floor before painting it will help from dust or dirt flying off the ground, the reaction you got on the paint is called fish eye its caused by oil under the paint that wasnt cleaned properly.
The imperfections you have on the bumper and pillar area are caused by contamination . Maybe try a filter before your gun or a better oil water trap by your compressor . Adding a little bit of fish eye eliminator also helps , other than that looks good my friend
Oiless compressors help a bunch!! If your getting alot of oil in the air it probably means worn rings on the piston, just like a car.
It’s not cause of oil, it’s only on the A pillars and bumper so that eliminates that idea, it’s probley sprayed too heavy with out letting the solvent gas out enough
Single stage red look SO GOOD!
Yoooo how did this comment not have any comments
Something about paint jobs that I enjoy watching
I’m currently painting my ef, seems like it’s painting season!
Red 1995 EJ1 was my first car. Almost 100k!!
Reactions from grease or oil. Always a good idea to primer the car first to prevent this. Good shit though.
That color so good on that car. But you are doing well bro same for family and friends God bless you guys
Love the channel you need a water oil separator or a filter at the end of your sprayer good stuff
I've been repping the BUILT2DRIVE on my window in an inconspicuous spot. I blew the D17A2 in the red EM2. My boy came to get me and he say the BUILT2DRIVE sticker and goes "how long has that been on there?" a week or two. "That's why you blew it up." LMAO
new motor on order. my 5-speed, shifter box, cables, pedals, used innovative mounts, and engine harness, I've been sitting on for years are finally going in the car. I got the underdash fuse box, all the 5-speed sub harnesses, brackets, new clutch mc, sc, clutch lines, oem flywheel-clutch-pressure plate, everything, and I mean everything. Doing a proper 5-speed swap like factory. All the harnesses and fuseboxes are for a 04-05 EM2 EX 5 M/T.
My D17A KPro and AEM gear showed up, and I pulled a k-swap conversion harness from a different EM2.
She's gonna be proper here, soon. I'm in the middle of pulling the dash harnesses.
Hey young static, hope your having a great day. I just wanted to give you mad props, on doing all the work yourself. You got mad skills brother. Love your videos to. I am a subscriber. Keep doing what you do.
I heard a lot of good things about single stage paint. I know some people don't like it, but I think it looks really good.
Brooo that red is FIRE! Matches my logo lol - bout to respray my integra but not sure what color. Be well family! Looking forward to that 3rd brake light and flag install haha
3:37 idk if its cause I'm drunk or what but this brought me to tears 😂😂😂
Definitely contamination in those three spots, probably got something on the rag you were wiping down with. What I do is apply wax and grease remover with one towel and dry with a separate one right behind it, one panel at a time and use new wipes on every panel. It's tedious but prevents cross contamination and when you do it for a living it doesn't pay to re-do the shit. The blue expensive paper towels work the best. A tack cloth is a good idea also. The piller will not polish out, gonna need a respray but u can just blend it in, probably just to the top of the windshield is where I would go. Oh, and the bumper, not sure if u used adhesion promoter but on raw plastic it's a good idea, just a light dusting and you good, you don't have to go crazy with it. You ever see those bumpers where the paint just peels right off, yeah. Just some pointers from a pro who has made many mistakes of my own along the way to this knowledge that I am more than happy to share with my fellow car peeps. Keep up the good work YoungStatic and keep the vids coming.
Actually, after going back and reviewing the video it looks like the gasket for the windshield is still installed and I think you have contaminants hiding under the gasket, so when you go spray there it just blows that shit everywhere. If removing the gasket is not an option you have to clean up under there the as much as you can or it will happen again.👍
Keep up the good work static... Almost at 100k... Always love the family vibe u put out..
Awesome video yet again. The reaction on the pillars and bumper are due to silicone.
Starting to really see your personality/character on here develope in this video Dana. Dig the vibe here.
I am always amaze watching you do everything. Awesome!!!!👍👍👍
Grease , Grease , Imperfection Bro !
Youngstatic your videos r great. Please keep on doing more videos , I am learning slot with your videos. God bless.
You the man bro I love watching your vids paint fab weld you do it all
My two favorite words "because racecar"
Cool im glad you got it
So, I still have the 612 whp built LSVTEC EJ8 Civic coupe, but I also just bought a 2001 Accord with a J30 to beat as a daily. Aside from swapping my touchscreen, subs, and amp into it, I'd really like to put a cat-back on it (don't know if it's dual or single yet) but I'd like to put on a really mellow sounding muffler, and a real cold air intake. It's an auto, but someday I'd REALLY like to do a manual swap. Other than those little things, I don't want to do anything crazy with it because it's supposed to be a daily.
Plzz plzz put out those wagon sweaters as a hoodie or tee. Paint looks great btw
Yoo that red came out soo good🔥🔥
I got a 1995 Milano red ej1 with original paint. Still shinny.
Did you wax and grease remove the car before paint? looks like some oil caused the fisheyes in the paint.
No prepsol wax and grease
Chicken McGriddles with grape jam fire bruh
Great content like always Dana and almost 100k man you have come a long way you definitely deserve it and some keep doing what you doing 💯👍💪
Dana bro, that came out so good.
Gregparts is awesome he makes all sorts of stuff. Nice job on the spray
That beanie go hard son
It’s called Fish eyes It had some type of oil silicone or polish on it still and wasn’t cleaned off properly that’s the reaction that happens wipe the car down with a degreaser before painting
Chicken McGriddle is FIIIYAAA!🔥🔥🔥
Great job man and great video take care
I like your videos and your project’s it’s awesome
Bro you are a one stop shop fr haha. Great job on the paint. Low key I’m not a big fan of red either. LOL 😝
I no sometimes it will react like that with some primer
That's why they say seal it first then paint. But it came out pretty dam.could for single stage.
Invest in a good filtration system, that will take care of your fisheye problem. Try a Motorguard m60
Great work. Tyvek suit is like $13 bro!
Dam that paint looks good 👌👌👌👌
PR EN LA CASA SALUDOS.
Nice work bro 😎👍👍😎👍😎👍😎👍😎👍👍👍😎😎👍
Can you cover polishing out the dirt specs when you do it, please?
It's single stage, you just melt it back into it's self with a wool bonnet on the Makita or DeWalt polisher
New sub man keep up the good work and stay safe!!😷
Nice paint job! Maybe Daniels AWD setup next?
Try putting some primer on the fiberglass bumper so the wet paint has something to grab into
Not bad man, i had my 88 firebird painted viper red back in the day its an awesome color! What PSI did you spray at?
Damn man you got special skills
Yoooo, Greg makes some fucking dopeass shit
they contaminated the entire body before painting😂😂 greetings from Honduras 🇭🇳👍
Wow bro you killed it again. Love ❤️ me EG coupe
Good looking making sure the flag made it!!!
What size do you need I got you
When did u start working on cars ?
That beanie tho 💪
Put a light coat of primer on the bumper, if u sand it all the way down.
How much did the paint cost? I might want to do that as well. Bro as soon as i seen that crx brake light thing, i googled greg parts before you even said to check him out lol. Really dope shit on here.
How big of a compressor do you use?
I'd love a Young Static paint job on my integra! all I want is the OEM green that's it, single stage should be fine but, I'd prefer single stage with one more coat of clear on top...
Then you might as well base/clear it. The clear coat might react with the single stage and fuck the whole thing up. You can't just add different clears and paints and shit, it don't work that way.
damon bertonaschi good looking out, I never knew that until now... well, I should stick with to single stage then to keep the cost down... or base/clear it, but I think it would cost more...
@@bradnaylor all depends on the coverage area. If you have a lot of body work with primer or you primed the whole car you gonna need a lot of color. A little primer here and there you could probably get away with a quart for between $40-$60 depending on if it's a solid or metallic. And a decent clear, for a gallon with activator is around $180 so less than $300 base/clear, looks better and lasts longer especially with the UV clear. Then you got pearls and candies which are three stage, then you're talking some money😁
damon bertonaschi it all makes sense what you said. it would be the whole car... it's that stock 1995 integra GSR green, whatever color that is... those prices aren't bad at all and the color does have metallic in it. it's better to go base/clear way... this is really helpful to help me decide which way I want it go with paint... thank you!
@@bradnaylor you are welcome. Basically comes down to this, if you want it to look good go base/clear.........if you gonna race it and don't care like Static go single stage. Holla at me if you got any questions.
Redman .. .yo the paint looks good couple spots but that happens sometimes more vids yo
hey bro how much do you sell a k series and if you can put it and how much do I get everything I'm from El CENTRO CALIFORNIA
GREGPARTS for the WIN
This man needs his 100k subscribers and then some. Super hard working out of your garage BUT every time he has project he pulls the projects out of his 🍑. Great job brotha and great channel.
Suuu wooooo!
brooo, idk if you get down with mcdonalds cheese slices, but, if you do, get one of them cheese slices on that chicken mcgridle next time. HA
Just bought a sticker👍🏽
12:20 that looks like what they call fish scales or orange peel....but its probably grease need to whip car down with solvent next time......other then that keep up the great work
I thnk it rippled cAz it's cold and or that was plastic
Nearly 100k subscribers
Grease or something on that pillar
👍🏻
Can I fly you in to finish my k swap? pay for the stay and work?
Alil bit of imperfections but still dig the paint job my cambodian brotha!!
That is water in the paint from the compressor
Great job as always static! Just curious what kinda of compressor are you using to paint the car? Im debating about picking up a new hobby like painting
Nice
A good wetsand and a good buff car will look wet. 👍👍
By the way who ever dislikes ur videos those viwers r pinkwidow subs 👎👎
How you clean the Red Crx headlights man?im looking for a Diy for mines
You can use metal polish it's the cheap way !
I think its foggy from inside.
How you wearing a beanie in this weather.
What ever happened to the youtube channel races?
Do a video with out any beanies
Because it's fucking cool that's why duhh
wasn't cleaned off good with wax and degreaser
You don't have to settle for good enough. I bet if you try a little harder you can do better next time. I'm not bashing you just trying to build you up.
❤️👍👍💯
There was grease on the car still
👍💨💨👍
Paco wiped so much he got to the bare metal...
That rubber looking stuff on the pillar is oils or dirty if you clean your car with wax and grease remover twice your not gonna have any of those problems
Cs up
Way too bloody for me. Lol jk that looks hella good.
I'm gonna hang it over there somewhere but not really 😭😭😭😭😂😂😂😭😭
#DA-MOO hands lmfao.
Rip to the shoes
I thought the paint had gold flakes for a minute.
Real talk man blow up open shop b2d Import custom. 100k by 2020. 1 Mill by 2025. Like how I said 2017. #EfGang
That accent at 4:20 tho
Bruh body kit and RX7 taillights.