Thanks for the video. Was worried the circuit board had gone but based on your video, thought I'd just make sure it was synced. Sure enough, it fixed it!
Thanks a lot Cyd! I had to replace the battery in the fob of my Peugeot 806 today. After doing so, the key wouldn't remotely un/lock the car. So, I followed the straightforward instructions on this tutorial for re-synchronising the key, and hey presto!...it locks and unlocks again! Thanks for sharing your knowledge for our benefit :)
It's almost universal nowadays that remotes need resynching after a battery change. One rerason why it's important to know how it's done. Good to know the process is consistent across the PSA range
Don't make mistake I did. If changing the plastic casing remove imobilizer (grey) chip and put in new one . New key fob worked for a week then no spark luckily still had old casing . Bought new car battery and had to pay mechanic £35 to solve my mistake . But if just changing fob battery great video
if you change a 2012 C1 key casing there's also a tiny chip glued into the back of the rear key shell that needs swapping over or the engine will turn over but won't start. It really small and can easily missed
You absolute diamond, I've just been trying everything to get the car started after swapping the fob, never would have seen the little chip if I had not seen this post. Thank you so much!
I am helping someone out awaiting a replacement fib . I'm aware of the transponder chip . He's had starting issues(no spark on 2 cylinders of 3 ) . I'm unsure whether the immobiliser deactivates the spark or the fuel.. his key dont look great so wondering if its in there etc . Could be crank/cam sensor. I'll start with key first
@@martynstables5820 thank you so much for the tip. It saved me £100 as I had binned the old key and engine was not starting. After finding the old key and transponder I was so happy to start the engine.
My mother have the Peugeot 206 2003 with the button key fob that have the battery replaced just recently for some strange reason it won't turn or twist in the ignition barrel even with a spare key without the buttons it turns no problem. My guess it either a bad cut from the dealer or the metal itself is either bent or twisted abit as looking at the shape of the cut grooves it identical to each other. Might check it another day to see if I'm right about the key issue
Hi, I have a 2010 107 and have tried all sorts of options on line to re-synch the key fob (including your suggestion) without success. Any other ideas on what I might do to solve the problem? Many thanks
Didn't work for me after replacing the battery, but what did work was putting the old battery back in and no synchronisation was necessary. I've done this twice now on our C1. Both the new and old batteries are over 3 volts with the new one at 3.27 and the old one at 3.03 and both are a good tight fit, so I don't have a clue what is happening with it, but if I just have to do this once a year, that is what I will do.
If the airbag light remains on or flashes, it is telling you that the SRS ECU has detected a fault. The ECU will retain a code that identifies where it believes the fault is but you need specific equipment to read the code. The most common problen with any electrics are connections and the most common airbag circuit connection that gives trouble is the connection to the seat (either for a seat bag or active buckle unit). So, check these connections first (undo, clean, remake) and check wiring for damage. SRS wiring and connectors are usually yellow. The next most common area for problematic connections is at the front accelerometers, which are behind the front bumper.
dear friend, I followed your instructions but given that the remote control card does not present any problems, it cannot be realigned; I also did it by separating the card from the remote but nothing happens gentile amico ho seguito le tue indicazioni ma posto che la sche del radiocomando non presenta alcun problema, non si riesce ad riallineare; l'ho fatto anche separando la scheda dal telecomando ma non accade nulla
Yes, I believe it does. The Aygo has the same key system as the C1/107. In case you need a new shell for your key here's a really cheap one (no logo, so you could just use the buttons half to get new buttons) bit.ly/PSA_key_shell
Hi, I have a Peugeot 107 2014 plate but it came with a non remote key? I was wondering if there was any chance of actually getting a remote electronic key as it’s a pain to lock with the key😂
@@izziesmith4588 if you have CDL it will operate from the drivers door sill button, key barrel or the remote. If the car does NOT have CDL, you won't have a remote.
sai dirmi come rimuovere la centralina del radiocomando della chiusura centralizzata? hai un video ? mi riferisco naturalmente alla Citroen C1 Can you tell me how to remove the central locking radio control unit? do you have a video? I am referring of course to the Citroen C1
Sorry I didn't see this when you posted. The honest answer is I don't know. I think you probably can on these, but might be worth asking at a dealer or independant.
I've followed all the steps. There was no plastic on the Duracell battery (CR2016 3V) so it went in as is. Didn't work right away so I put it in the ignition, turned on the car without starting and pressed the lock button. Switched it back off and took the key out. Tried either button and it did nothing. Tried again with the unlock button and again, didn't work. The car starts and drives normally so it really is just the connection. What else can I try to resync it?
What did you do? i got C1 with the Remote key fob but it dosent work, i tried changing the battery and trying to sync but unssusefull so far @@chocoboasylum
I tried a sequence of opening and closing the doors, etc, in a video called 'toyota Aygo, citreon C1 and Peugeot 107 remote coding procedure clear and easy to follow instruction'@@filipmilic9802
My C1 key fob opens the central locking but won't lock it i have changed the battery and attempted to program the key following your advice to no avail, could it be a fault with the key fob circuit board?
@@CycloneCyd Simultaneously push the lock and unlock buttons on the key remote and hold them down for 1.5 seconds. As soon as you release those two buttons, press the lock button. Hold it down for two seconds. Then your car doors lock and unlock again as a sign that the key fob programming was successful.
Sorry, are you saying that both door locks are siezed (or otherwise non functional) so you cannot unlock the car with the key?? If the case has lost it's buttons you should be able to press the switches on the PCB using a small screwdriver or cocktail stick. Give that a try (but don't open the case - doing so disconnects the battery from the board and it looses it's synch)
Just went to Timpson and they programmed and cut the key for me Citeon C1 cost me £60 today 23rd 2020. I have heard so much rubbish on internet. It has been confusing. Also need to say it was from my original key that he was able to program the key. This is just a second key in case I lose original and this one does have buttons. But that okay I will just manually lock it. I tested it started car and manually opens door. But that fine by me. Hope this help. I hope this is in plain English
Hello, i have done this, and it works perfect for central locking. Butt my car wont ignite, i have to use the normal key, the one without central locking, to ignite the car. Does anyone know how to fix this?
Is this the same procedure to sync a new key fob? I've just bought a replacement fob off ebay for my wife's C1 and I've tried this several times with no success.
@@CycloneCyd the remote control does not respond. I have to unlock the car via the drivers keylock . Meanwhile I don't have to reprogram the key. It works as soon as the car unlocks.
@@panagiotisbountzioukas3687 Have you checked the battery contacts in the remote? Other than that I'd suspect the problem is with the car. Check the car's battery is okay ua-cam.com/video/AT_XmlwMVz4/v-deo.html
👉 How to clean and lubricate a car door lock: ua-cam.com/video/9PKT1d1n3a0/v-deo.html
Thanks for the video. Was worried the circuit board had gone but based on your video, thought I'd just make sure it was synced. Sure enough, it fixed it!
Thanks a lot Cyd! I had to replace the battery in the fob of my Peugeot 806 today. After doing so, the key wouldn't remotely un/lock the car. So, I followed the straightforward instructions on this tutorial for re-synchronising the key, and hey presto!...it locks and unlocks again! Thanks for sharing your knowledge for our benefit :)
It's almost universal nowadays that remotes need resynching after a battery change. One rerason why it's important to know how it's done. Good to know the process is consistent across the PSA range
Don't make mistake I did. If changing the plastic casing remove imobilizer (grey) chip and put in new one . New key fob worked for a week then no spark luckily still had old casing . Bought new car battery and had to pay mechanic £35 to solve my mistake . But if just changing fob battery great video
thanks for a great informative video, I do like your presentation style 👍
I really appreciate that Steven, thanks!
Worked. Great stuff mate 👍
Good to hear
if you change a 2012 C1 key casing there's also a tiny chip glued into the back of the rear key shell that needs swapping over or the engine will turn over but won't start. It really small and can easily missed
You absolute diamond, I've just been trying everything to get the car started after swapping the fob, never would have seen the little chip if I had not seen this post. Thank you so much!
Thank you so much, i managed to throw the old key in bin and was confused to why my car was not starting 🙏🏼
I am helping someone out awaiting a replacement fib . I'm aware of the transponder chip . He's had starting issues(no spark on 2 cylinders of 3 ) . I'm unsure whether the immobiliser deactivates the spark or the fuel.. his key dont look great so wondering if its in there etc . Could be crank/cam sensor. I'll start with key first
Thank you! I have just dug the old fob out of the bin, and there is indeed a chip. Was just about to call recovery.
@@martynstables5820 thank you so much for the tip. It saved me £100 as I had binned the old key and engine was not starting. After finding the old key and transponder I was so happy to start the engine.
Thanks - just when needed 😃😃
Thanks for watching Jan. 👍
Cheers Bud, Good man
Glad to help
Thanks for that. 😙
You're welcome 😊
I did everything right, except remove that damn sticker from the back of the new battery - thank you for restoring my calm and sanity! 😂👍
Hey, we all miss a nail in the tyre once in a while 🤘. Welcome aboard
@@CycloneCyd Funnily enough, I had a nail in my tyre last week as well... 🤣
@@jam67uk lol lol lol shouldn't laff, these things are a pain in the arris rail, but I couldn't help it. Quite some coincidence though.
@@jam67uk And if it's sanity you need - you can borrow mine, I'm not using it
Life saver😂
Thanks Issy, you're welcome
My mother have the Peugeot 206 2003 with the button key fob that have the battery replaced just recently for some strange reason it won't turn or twist in the ignition barrel even with a spare key without the buttons it turns no problem. My guess it either a bad cut from the dealer or the metal itself is either bent or twisted abit as looking at the shape of the cut grooves it identical to each other. Might check it another day to see if I'm right about the key issue
Thank's...its work for my c3 2003...👍👍👍
Excellent. Thank you for watching
@@CycloneCyd 🥰🥰🥰
Hi, I have a 2010 107 and have tried all sorts of options on line to re-synch the key fob (including your suggestion) without success. Any other ideas on what I might do to solve the problem? Many thanks
How did you solve the problem if i may. I've got the same struggle now.
Didn't work for me after replacing the battery, but what did work was putting the old battery back in and no synchronisation was necessary. I've done this twice now on our C1. Both the new and old batteries are over 3 volts with the new one at 3.27 and the old one at 3.03 and both are a good tight fit, so I don't have a clue what is happening with it, but if I just have to do this once a year, that is what I will do.
Cheap batteries? Be sure to buy good quality.
Cheers. Saved ma a good few quid on the reset..Any chance u know how to fix a flashing airbag light..he glasgow..
If the airbag light remains on or flashes, it is telling you that the SRS ECU has detected a fault. The ECU will retain a code that identifies where it believes the fault is but you need specific equipment to read the code.
The most common problen with any electrics are connections and the most common airbag circuit connection that gives trouble is the connection to the seat (either for a seat bag or active buckle unit). So, check these connections first (undo, clean, remake) and check wiring for damage. SRS wiring and connectors are usually yellow.
The next most common area for problematic connections is at the front accelerometers, which are behind the front bumper.
dear friend, I followed your instructions but given that the remote control card does not present any problems, it cannot be realigned; I also did it by separating the card from the remote but nothing happens
gentile amico ho seguito le tue indicazioni ma posto che la sche del radiocomando non presenta alcun problema, non si riesce ad riallineare; l'ho fatto anche separando la scheda dal telecomando ma non accade nulla
Really good video! Just wondering, does this work for 1st gen Toyota Aygo's?
Yes, I believe it does. The Aygo has the same key system as the C1/107. In case you need a new shell for your key here's a really cheap one (no logo, so you could just use the buttons half to get new buttons) bit.ly/PSA_key_shell
Kom france mi ami met de japan engine citroën c1
Hi, I have a Peugeot 107 2014 plate but it came with a non remote key? I was wondering if there was any chance of actually getting a remote electronic key as it’s a pain to lock with the key😂
Does your car have CDL? Some basic models don't and yours may be one of them.
@@CycloneCyd how do u know if yours doesn’t come with it
@@izziesmith4588 if you have CDL it will operate from the drivers door sill button, key barrel or the remote. If the car does NOT have CDL, you won't have a remote.
sai dirmi come rimuovere la centralina del radiocomando della chiusura centralizzata? hai un video ? mi riferisco naturalmente alla Citroen C1
Can you tell me how to remove the central locking radio control unit? do you have a video? I am referring of course to the Citroen C1
my chip is broken. i can buy a used one for 20 dollars. can i program it to the car?
Sorry I didn't see this when you posted. The honest answer is I don't know. I think you probably can on these, but might be worth asking at a dealer or independant.
I've followed all the steps. There was no plastic on the Duracell battery (CR2016 3V) so it went in as is. Didn't work right away so I put it in the ignition, turned on the car without starting and pressed the lock button. Switched it back off and took the key out. Tried either button and it did nothing. Tried again with the unlock button and again, didn't work. The car starts and drives normally so it really is just the connection. What else can I try to resync it?
Nevermind, I got it to work!
What did you do? i got C1 with the Remote key fob but it dosent work, i tried changing the battery and trying to sync but unssusefull so far
@@chocoboasylum
I tried a sequence of opening and closing the doors, etc, in a video called 'toyota Aygo, citreon C1 and Peugeot 107 remote coding procedure clear and easy to follow instruction'@@filipmilic9802
My C1 key fob opens the central locking but won't lock it i have changed the battery and attempted to program the key following your advice to no avail, could it be a fault with the key fob circuit board?
Sounds like the lock switch has given up. You can buy replacements, but you need to be a dab hand at soldering.
@@CycloneCyd Simultaneously push the lock and unlock buttons on the key remote and hold them down for 1.5 seconds. As soon as you release those two buttons, press the lock button. Hold it down for two seconds. Then your car doors lock and unlock again as a sign that the key fob programming was successful.
My p107 doesn’t have the buttons anymore and now the car won’t open manually? Any ideas
Sorry, are you saying that both door locks are siezed (or otherwise non functional) so you cannot unlock the car with the key?? If the case has lost it's buttons you should be able to press the switches on the PCB using a small screwdriver or cocktail stick. Give that a try (but don't open the case - doing so disconnects the battery from the board and it looses it's synch)
Cyclone Cyd it’s alright mate all fixed now(kind of) managed to get the buttons to work on they key using a paper clip 😂
Can use this method on a brand new key you buy of the internet for a Citroen c1 or would I have to get a locksmith to programme it?
NO, the car needs programming to accept a new key. This is for synchronising an existing key only
@@CycloneCyd Thank you for you reply
Just went to Timpson and they programmed and cut the key for me Citeon C1 cost me £60 today 23rd 2020. I have heard so much rubbish on internet. It has been confusing. Also need to say it was from my original key that he was able to program the key. This is just a second key in case I lose original and this one does have buttons. But that okay I will just manually lock it. I tested it started car and manually opens door. But that fine by me. Hope this help. I hope this is in plain English
My car does not start now I have got a Peugeot 107 what can I do
Did you resynch the remote?
@@CycloneCyd so my sabb key won’t turn at all not even to the off position. How would I get key to re sync
I have Peugeot and the battery is 1620 not 2016.
Nice
welcome aboard
@@CycloneCyd just finished with my key thanks for the help
@@cameronhenley2672 👍👍👍 🖖🖖🖖
What’s the battery you need to replace with please ?
2016
Hello, i have done this, and it works perfect for central locking. Butt my car wont ignite, i have to use the normal key, the one without central locking, to ignite the car. Does anyone know how to fix this?
I now have the same problem. Did you find a solution for this?
@@Velkominn did anyone find the answer? Mines the same
Any one fixed the key not starting nthe car? My basic spare does but the remote locking one doesn't anymore!
You haven't moved the imobilser to the new key
Have you found solution for this or you had to pay for recording?
Hi, I’ve done this but even after I’ve swapped the battery, it still doesn’t work. Any ideas what I should do?
Could you let me know how did you managed after???
What have you done? Mine's dead now😔
Akos Kositzky umm nothing. It stayed broke. Took it to a professional and he said the circuit board was fried and it would be 300 to replace it🤷🏾♂️
@@TK-cs1qc my car was £600. Deffo not gonna spend that much on a key🤷🏻♂️😅🥴
Akos Kositzky loool exactly. I just had to keep using the key as it was
Hi does work with 107 2012?
if it has the same key, yes.
Is this the same procedure to sync a new key fob? I've just bought a replacement fob off ebay for my wife's C1 and I've tried this several times with no success.
Works with my C3 2003 BUT as soon as 10 minutes past, I get the same old problem
what problem is that?
@@CycloneCyd the remote control does not respond. I have to unlock the car via the drivers keylock . Meanwhile I don't have to reprogram the key. It works as soon as the car unlocks.
@@panagiotisbountzioukas3687 Can we just clarify that: are you saying you cannot unlock the car with the remote, but you can lock it?
I am just saying that the remote stops working if the car is left untouched for 10 minutes. No matter if it was open or locked in the meantime.
@@panagiotisbountzioukas3687 Have you checked the battery contacts in the remote? Other than that I'd suspect the problem is with the car. Check the car's battery is okay ua-cam.com/video/AT_XmlwMVz4/v-deo.html
Don’t forget to take the sticker off the back of the battery! I refitted mine twice before I realised it was there lol