Installing our Auger Motor Bracket on Your Pellet Grill
Вставка
- Опубліковано 24 лип 2024
- This auger motor bracket is designed to stop the flop when your auger is running, making it cut through pellets more efficiently. In the long term this should extend the life of your auger motor.
To order go to: smokedaddyinc.com/product/aug... - Навчання та стиль
Had to fix my grill when got moisture in the auger cylinder and bricked it up with pellets. While it was apart I was surprised how flimsy the motor was installed inside. Bought this bracket to fix what Pit Boss should’ve designed better in the first place.
For all those who have not purchased this modification bracket you are missing out on a great stabilizer for you Auger Motor. This was a cleaver and crafty idea that works!!!!!!!!!
Nicely Done Dennis!
Love it
I'm looking at a solution for the drip tray that sits on the right side of the smoker where the broiler plate sits and drips the grease to the bucket. Mine is rusted out and the broiler tray can barely sit on it anymore.
Give us a call at (847) 336-1329 and we can come up with a solution with you
Dennis, is this required for all new Pellets Pro smokers; particularly the PPV-2300? Or, do you have an effectively date for cut in?
The PPV-2300 are coming with a different kind of motor that is already attached to the hopper assembly. This bracket is for existing hopper assemblies to help stabilize the motor.
The new motor is pictured in the listing for the PPV-2300
smokedaddyinc.com/product/the-pellet-pro-vertical-cabinet-pellet-smoker/
Great video smoke daddy 10:09
I need that bracket for my old 820 pro is there a link so I can get one love the channel thank you for all the help!!!!
smokedaddyinc.com/product/auger-motor-aluminum-stabilizing-bracket/
Thank you!
Why do you only send 2 bolts to attach the plate to the new USA made auger motor when there are 4 holes? Thanks
I believe that we missed the four bolts to attach to the motor in your order the 2 bolts that come with it are to attach the bracket to the auger shelf. If you give us a call we can definitely get the additional bolts out for you. We are sorry for the mistake.
The free floating motor is by design, because the augers have an inherent amount of wobble or run out, and can also bind up. When the the auger wobbles, the motor is able to move around to get past the wobble. If the motor is mounted solid, all that auger wobble and resistance is sent directly to motors internals. Which will over time will wear out the motor. Watch the motor sometime when the auger is running. You'll see the hole motor move around to absorb the augers less than perfect tolerances.
The floating motor has been an issue for many years. By mounting it more securely I believe gives you a better feed rate and helps to cut the harder pellets easily. If the auger shaft is not bent, there should be no wobble Thanks for your comments?
@@DennisCorrea At eye level, roll any auger across a flat surface, and you will visually see warpage in the auger. Gaps between the auger and the flat surface, and the attached welded shaft moving up and down. It especially gets worse with heat, over time.
That's exactly how I check it. If you can spin the auger with your fingers while it's in the white bushing, that's good. If it seems to be a little tight, you can always open the hole up a little bit on the white bushing.
Where do I get the mounting bracket? Thanks
You can purchase it directly from our website smokedaddyinc.com/product/auger-motor-aluminum-stabilizing-bracket/
The Oklahoma Joe Pellet grill already has a welded bracket. No need to modify after purchase...
Thanks I'm going to try this. I don't Like the way pit boss did this looks really cheap.
How much does the brakes cost?
The brackets are 29.99
Do you sell the motor also
We do sell the motors as well, we sell pretty much any replacement parts and upgrade for pellet grills
OH HELL YA! SHUT UP AND TAKE MY MONEY! Whoever designed the "floppy motor" disaster needs to be punched in the nose. Order inbound TYVM!
SAME! Blew my mind when it started growling-torquing-slamming-BANGING and nothing attaching but the shear-bolt so when I seen them on eBay I bought it quick lol