Please update when it starts to melt the rear valence, because it definitely will sitting like that. May want to have an exhaust shop lengthen the axle back for ya. Sounds good though!
I’m glad I’m not the only one thinking that as soon as I seen him go under I got chills that shits sketchy as fuck bro would be a pancake if it just happened to fall 😂 and definitely need an extension on that
For your info . I think you had to change the diffuser coz overtime the exhaust muffler heat will melt the diffuser due to exhaust muffler length not long enough come out of the diffuser . Nice sound btw 😏
@@Powerbandbandit good to hear that . Hopefully the heat wont melt that even the exhaust tip not touching the diffuser . As my friend happened . Changed the diffuser while the twin exhaust maintain stock ( exhaust tip length is shorter than the diffuser ) . Ended up the diffuser melted because the heat flows on top during idling .
Did you have any problems tightening the bolts on the adapter? I’m currently installing this exhaust on my car and having issues tightening the adapter
11th Gen Civic Si Sedans look better that the Hatches. 10th Gen Si Coupes are the best looking 10th gens. Searching everywhere for a 10th gen Si Coupe for my new project car and will swap a CTR crate engine on that mug!
Whats up bro, you pretty much FBO at this point right? Does it feel funner? Do you have any idea of your numbers? I want the Si because it’s so sexy, like the power and potential of the accord but the interior and exterior of this Si is a sexy lmao. From what I read you can’t add too much power to these, want to keep it for at least like 5yrs don’t want to blow a engine I’m financing😢
There reliable cars if you get tuned by a good tuner. Right now my car isn’t tuned yet it should be around 215-220hp range. If I get tuned I’ll be around 280-290whp. Accords are good cars too. The interior of the si looks better imo. I’ll be going big turbo and getting tuned soon. I’ll definitely try and make more UA-cam content
@@Powerbandbandit Yea I just installed mine and Ive never had an aftermarket exhaust on a car before. Sounds like alot to me in mine but I may have a leak somewhere. Ill check and see!
@@citrus_fire2078yes check for exhaust leaks. make sure you used the gaskets too. I have a PRL downpipe and front pipe, and the drone is still very minimal.
@@Powerbandbandit For the exhaust hanger provided from prl, where did you put that? It seems as if my exhaust isnt aligning correctly making some gaps in the connections.
Your car is clean man. Had my FE1 for a year now, love the heck out of it.
Thanks man. There very fun and reliable cars!
@@Powerbandbandit It's They're, not there. You spelled it right, you just didn't use the correct word.
That sounds and looks amazing
Thanks bro I appreciate it🙏🏽
Wow that SI looks so good! The lil duck tale wing makes it even hotter! Love your 11th gen bro! 🤩
Please update when it starts to melt the rear valence, because it definitely will sitting like that. May want to have an exhaust shop lengthen the axle back for ya. Sounds good though!
Such a gorgeous car. Honda perfected this one. Sounds great too! Love the single exit.
They forsure did one of my favorite looking si’s. Thanks man!
Like the deep/throaty sound, Greddy SP2 has the same deep/throaty sound as well.
Safety not #1 priority with this guy 😂
lol 😂
In the car world safety is very important, its in my top 3. Safety Third!!!
I’m glad I’m not the only one thinking that as soon as I seen him go under I got chills that shits sketchy as fuck bro would be a pancake if it just happened to fall 😂 and definitely need an extension on that
osha hate this guy!
You need to get yourself some wheel chocks and some more jack stands. Small price to payfor safety.
Sounds good but I just couldn't lose the duals
Good job 👍💪💯
Thank you 🙏🏽
sounds clean!!!
What’s the part number on the red H
Sounds great
Thank you sir💪
Sounds better than the double N1. IDK why that even exists.
I need a downpipe and front pipe now.
Do it!!! You won’t regret it
For your info .
I think you had to change the diffuser coz overtime the exhaust muffler heat will melt the diffuser due to exhaust muffler length not long enough come out of the diffuser .
Nice sound btw 😏
It’s been fine so far, I touch the diffuser after driving and it doesn’t feel warm at all. The exhaust doesn’t touch the diffuser.
@@Powerbandbandit good to hear that . Hopefully the heat wont melt that even the exhaust tip not touching the diffuser . As my friend happened . Changed the diffuser while the twin exhaust maintain stock ( exhaust tip length is shorter than the diffuser ) . Ended up the diffuser melted because the heat flows on top during idling .
Does the exhaust tip sit behind the diffuser?
Are you tuned? If so what are your HP numbers?
How much power do you think/know youre making now with those bolt ons? Thinking about doing the same with mine thats why
If he has a PRL intake too, I'd say around 210-212ish 3" single exit exhausts are the way to go!
Nice exhaust man. Looking to get the same car. Doesnt it void your warranty though?
Not at all.
Did you have any problems tightening the bolts on the adapter? I’m currently installing this exhaust on my car and having issues tightening the adapter
Use a wrench instead of a ratchet!
11th Gen Civic Si Sedans look better that the Hatches. 10th Gen Si Coupes are the best looking 10th gens. Searching everywhere for a 10th gen Si Coupe for my new project car and will swap a CTR crate engine on that mug!
Muffler tip needs to come out more. You’re gonna start melting that rear valence.
I thought you were selling the car? Saw it on fb marketplace a few weeks ago
I have this for my hatchback and for some reason it sticks out a lot further. Wonder why
Hatchback is shorter and the exhaust is same length?
@@dykemyster if the hatchback is shorter, then they should have fitted the exhaust for it tbh. i might try to get it refitted at a shop
🔥🔥
Atleast some harbor freight jack stands or ramps
Whats up bro, you pretty much FBO at this point right? Does it feel funner? Do you have any idea of your numbers? I want the Si because it’s so sexy, like the power and potential of the accord but the interior and exterior of this Si is a sexy lmao. From what I read you can’t add too much power to these, want to keep it for at least like 5yrs don’t want to blow a engine I’m financing😢
There reliable cars if you get tuned by a good tuner. Right now my car isn’t tuned yet it should be around 215-220hp range. If I get tuned I’ll be around 280-290whp. Accords are good cars too. The interior of the si looks better imo. I’ll be going big turbo and getting tuned soon. I’ll definitely try and make more UA-cam content
@@Powerbandbandit I’ll be watching. Thanks
debating trading in my 23 wrx for an si
You won’t regret it!
Debating between this or invidia dual N1
Tbh I love how the single exit looks more. It makes the car look super aggressive
Very nice
So will it melt the diffuser? lol
You never get gap by a 10th gen.. ?
Will it pass smog with that exhaust?? Cali Bs😭
I'm here for that too. Lol
Hows the drone on that?
Very minimal. Little to none
@@Powerbandbandit Yea I just installed mine and Ive never had an aftermarket exhaust on a car before. Sounds like alot to me in mine but I may have a leak somewhere. Ill check and see!
@@citrus_fire2078yes check for exhaust leaks. make sure you used the gaskets too. I have a PRL downpipe and front pipe, and the drone is still very minimal.
@@Powerbandbandit For the exhaust hanger provided from prl, where did you put that? It seems as if my exhaust isnt aligning correctly making some gaps in the connections.
@@citrus_fire2078 it goes in the rear hanger the one on the passenger side
I feel like youre gunna burn that rear diffuser lol
Nah it doesn’t hit the diffuser been almost 2 weeks and it still ain’t burnt.
Bro the way you have this car lifted is giving me major anxiety.
I’m alive it’s ok
wheels not chocked"? u gon die
Shiet, at least take the rear wheels off place them under the car. This way, when the jack fails you can still use your legs lol
Nah I don’t like my legs
Sounds meh, and that rear diffuser looks great with two cutouts and only one muffler. 🤦
Lmao you a hater😅 thanks for the view tho
"Promo SM"
Is this CARB compliant?
Dumb California
That is so sketch. Id go to a hobby garage or pay a shop.
👍
Nah just more jacks and a few wheel chalks.
Good video! Could I get your car page on IG？