Hello I have a question and you are only of the few creators I’ve seen that have the same bios as I do. So my problems started after I installed a new graphics card and 2 new Corsair ram sticks. Once all was set I tried booting up my pc and cant get past bios so it won’t boot windows. I’m not very technically inclined with computers in the bios area. If you could have any idea what I could do it boot I would really appreciate it! Thank you so much for this helpful video as well
If you're able to enter BIOS, i'll suggest you to 1. Make sure hard drive is properly detected (Check storage and see if your drive is listed) 2. try change UEFI to CSM mode @ "BIOS\Settings\Advanced\Windows OS Configuration\BIOS UEFI/CSM Mode"
Morning, i have manage somehow to get into BIOS after almost 2 weeks. The BOOT light was on the Mobo and i wanted to change my Ram speed from 2666 to 3200 and i have changed Infinity Fabric Frequency and Dividers from 1800 to 3200 and my PC is not booting anymore and the CPU RED lights is on, how can i fix it ? Clean the CMOS and Flash Update the BIOS again ?
Thank you. About to power up new MSI Motherboard. Very helpful.
Hello I have a question and you are only of the few creators I’ve seen that have the same bios as I do. So my problems started after I installed a new graphics card and 2 new Corsair ram sticks. Once all was set I tried booting up my pc and cant get past bios so it won’t boot windows. I’m not very technically inclined with computers in the bios area. If you could have any idea what I could do it boot I would really appreciate it! Thank you so much for this helpful video as well
If you're able to enter BIOS, i'll suggest you to
1. Make sure hard drive is properly detected (Check storage and see if your drive is listed)
2. try change UEFI to CSM mode @ "BIOS\Settings\Advanced\Windows OS Configuration\BIOS UEFI/CSM Mode"
Thank you for the CSM tip. I was stuck for hours trying and failing to boot into windows. This fixed it.
Please note Bluetooth Mouse or Keyboard will not work in Bios
Really? Last time I was in the BIOS (24 hrs ago), my Bluetooth mouse, Logitech G305 worked just fine! Who knew?🤓
Morning, i have manage somehow to get into BIOS after almost 2 weeks. The BOOT light was on the Mobo and i wanted to change my Ram speed from 2666 to 3200 and i have changed Infinity Fabric Frequency and Dividers from 1800 to 3200 and my PC is not booting anymore and the CPU RED lights is on, how can i fix it ? Clean the CMOS and Flash Update the BIOS again ?
If your memory supports 3200Mhz, enable XMP should be enough. If not, then you use memory try it from OC menu.
@@tiredhamster8437 not sure how to enable it tbh… or how should i go A-XTM
@@Flav1CS Game Boost section and just click XMP/AXMP and press F10 to save and exit
My bios is black and white. How do i enter ez mode
gse lite BIOS interface is different , see www.msi.com/page/mb-beta-bios
@@tiredhamster8437mine is also black and white and I was wondering how I could change the amount of ghz I have from 2.1 to 3.5