Predator performance ignition coil versus stock coil
Вставка
- Опубліковано 10 вер 2024
- Predator performance ignition coil versus stock coil
Took the 212 Predator-powered Azusa minibike out for a top speed and 0 to 30 runs with the stock ignition coil and then swapped the coil out for a high-performance non-resistor coil, and ran the same speed test to see if there was any difference in performance.
Instagram - doubledown555Black66
Parts used -
__________________________________________________________________
Ignition coil - www.ebay.com/i...
Sprocket - www.ebay.com/i...
.020 ARC billet rod - www.arcracing.....
ARC billet flywheel - www.arcracing.....
ARC billet side cover - www.arcracing.....
Head gasket - Predator 212 PRO SERIES head gasket-www.ebay.com/i....
Head stud kit - www.ebay.com/i....
Champion shaft mounted rockers - www.ebay.com/p...
VM22 Mikuni carb kit - www.amazon.com....
GX 160 head - www.amazon.com....
Header pipe - www.ebay.com/i....
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Interesting to see what jetting up the Mik one number would do. Good video.
Spot on 😉 it was a bit lean to begin with.
The good news is I'm watching and learning 😊
I learn something every time i do a video. And its fun
Always love to see this bike in your videos. Another banger!
I hope you try out one of those CDI kits or adapt your own. The engine could potentially idle alot smoother with delay and achieve a higher advance than possible at rpm, thus improving performance and longevity without opening the engine.
Performance coils are not resistor free only I sell hotcoils and I have them manufactured they are made to provide more spark power. They are resistor free but Taking a stock coil and making it resistor free isn't a high performance coil. Great video
I've been watching your channel for awhile now, 1 of THE BEST Mini bike channels BY FAR, I been curious though is your throttle grip stock I always see you rocking it forward it looks like ?
I’m glad I watch this because I was just about to dump $45 on an MSD. I think I’m just gonna buy a better wire
Yup me too 😂 there not much of difference and 45 bucks down the drain
On August 8 of this year, my rear bearing locked up at 60 miles an hour I was able to keep that little bike up until about 20 miles an hour then it threw me, I broke my shoulder my left arm, my left wrist five ribs on my left side multiple fractures per rib, and one rib damage to my left lung. Needless to say I won’t ever step on another one because I don’t know if it was a prediction. Or just shit luck, but I always told my wife the rear wheel will lock up one day and F me up real bad and that’s what happened
@@jojojeep1Sorry to hear that, sounds really bad. It's easy to forget these little bikes were never designed to go past 20mph. They are sold as toys for kids but once you start modifying them they are no joke and you really have to treat them like a motorcycle with bad handling. Hope you have a quick recovery and find another way to go fast!
@@allurared9029 I feel I’m 100% healed except my shoulder. I’m going to need an operation if I want to lift my arm up over my head again I have good insurance thank God for that and God he affords me the money to buy health insurance.
Try the coil wire wrap with solid copper wire around the plug wire...Test the spark against the other standard and performance type...I have a video about this...The insulator wire cover is thicker and the windings are tighter...
Good video Black66, I learn something new from you every week. 🙃👽💯
Another great test
I am reposting a question:
When are you going to start a discord that way everyone in the "minibike" scene can post and chat also I think it would be cool to have like a build section and what not plus hot deals and what not
Good to know it's not really worth it for the price
Great Information 👍
Hi I was hoping u can help me… I got a 212cc predator hemi with billet flywheel rod and hot 265 cam and rite at 6900 rpm it shuts down the motor like a safety thing… it doesn’t allow the motor to hit full potential or float valves… do u think that can be my stock coil
Could be or Is it running out of fuel? Float level maybe...
@@Black66Can you make a video on that ? my build is doing the same thing I was thinking the floats or the stock ignition coil was the problem
Hey black66 i hope you are doing good, so i want to know what is better to have on a predator 212 a torque converter or a max torque clutch / a torque converter with juggernaut or a Max torque clutch with straight chain wich one is better the place where i ride at has a lot hills and some straight roads where i can speed through wich one should i use
Woohoo 😁🎉👌💕🌟 allsome stuff and allsome work cool black from cruzermans inventions 😁🎉👍
Hi I have a quick questions I have a predator 8hp 301cc engine that is missing the bolt that goes on the drive shaft to secure the clutch pully for my 40 series torque converter its a reverse trend bolt were can I find one been looking everywhere
Hey man real fast what was the feeler gauge when you out the non resistor coil in ??? Was it 016??
What app do you use to track your speed and time
I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.
i saw arcing from my coil boot in the dark the other night. on 196cc from the plug to the jug
Hey black how much can I buy a bike for, I’ve been looking at the Coleman bikes but I would like to buy one off you.
Yea how much please black love the video btw
@Black66
👍
So what’s the best upgrade wire for the spark plug
I gotta question..
What would happen if I shortened the ground wire on my coil ?
I have a 224cc predator max with a 196cc hysun head , vm22 carb 135main jet ,arc billet flywheel and dyna grinder 2 cam , 18lbs valve springs ...soon going to a 26lbs arc valve spring . Thank-you for all your advice and testing . Your awesome and a great teacher . Thanks again.. Brother . I'm in wenona illionis now 765' sea-level elevation
What do you mean by shortened your ground wire? There are no ground wires on these coils, they are grounded through the laminated steel core to the crankcase. There is the kill switch wire, which is connected to the primary windings of the coil. All it does is connect the primary windings to ground so when the magnets pass over the coil any voltage is dumped into ground before the coil can turn it into a spark. You could shorten this kill wire as much as you want and it will still work.
I live in Pennsylvania and if we ride on the road like this we will get chased if the wrong people see you. Where are you? Arizona?
Great videos. Attempt has 3 'T's'.
Thanks! Man , I've been doing attempt spelled atempt and attemp for over a year and you are the first to catch it!😀
atttemp
are you in arizona??
Love your videos! Can you do a video comparing the stock Ghost coil vs this performance coil?
Thanks! You can tell what the Ghost coil is like compared to a stock predator coil in this video. It maxes out a about 6k RPM in the video. Check it out! ua-cam.com/video/lm6zTvhJHSk/v-deo.html
@@Black66 I believe I watched that video but was wondering if my stock ghost coil out performs the blue performance one in your video. I noticed the ghost coil is much larger and has a additional ground strap vs the blue one. A comparison of those two would be nice on the ghost.
@@GotRiceYo I probably could get away with a comaprison on the same bike set up that was in this video. The bike was turning right around 6k RPM maybe a little more.
@@Black66 I agree that would be a good test on that bike. Thanks brotha!
So need kore gas or new jet ?
Bad link for the flywheel. FYI
Couldn't you just put an old stile boot and retainer on and accomplish the same thing. Or keep the stock and buy a key with less timing.advance. I can't see 50$ worth for an msd boot and wire.
Coil is about $30 off his link in description.
The small 0-30 gain he got and the second run with next to no gain make this not worth getting.
where the link for this coil
Links for the parts used are in the description of the video.
im getting that coil right Fricin now so Help me God
i got a stock 212 so i guess this wouldnt be worth it for me
can Anybody Say BEAST 1o TiMES FaST!!!!! hmmmmm
First
LoL
You were 2nd.
I was 1st on his video
🍪