Converting John Deere Hydraulic SCV to ISO/Pioneer

Поділитися
Вставка
  • Опубліковано 21 вер 2024

КОМЕНТАРІ • 31

  • @jaredmore8527
    @jaredmore8527 9 місяців тому +6

    Guys like you make UA-cam a great resource and time saver. Thanks

  • @AndersonCreekOutdoors
    @AndersonCreekOutdoors Рік тому +3

    Been looking for info on rebuilding these for quite a while, Best video I've seen yet!

    • @twocylinderwill
      @twocylinderwill  Рік тому

      I wasn’t happy Deere’s own video doesn’t use their own kit, so I made my own. Glad I could help you out!

  • @PeterWindrem
    @PeterWindrem Рік тому +2

    This is à magnificent explanation! I have tried to complete this procedure once before without success. This time it works. Thank you.

  • @mattreb6712
    @mattreb6712 Рік тому +1

    Great video, just what I was looking for. Thanks

  • @RandyChristenson-k6n
    @RandyChristenson-k6n Рік тому

    Excellent detailed video

  • @terrimartin8630
    @terrimartin8630 8 місяців тому

    excellent explanation !

  • @StanleyHeinzelman
    @StanleyHeinzelman 11 місяців тому +1

    Did this to my 20 , 30 and 40 series why !! Now matches the 50 series and any other equipment you use . Barrow, steal, or god fore bid buy, lol. Convince!!!!

  • @d3700
    @d3700 Рік тому

    Excellent video. Thanks for info.

  • @jimandrews2967
    @jimandrews2967 10 місяців тому

    I just installed this kit in our early 1968 4020 yesterday.
    The complete conversion kit at the dealer was the way to go.
    It has everything in the kit you need to get it done.
    Yes , take the lines off the block and remove the block , then disassemble on the bench to replace those o-rings and backing washers.
    After this conversion is done , make sure to buy the correct couplers for all your hoses.

  • @mentinkfamilyfarms
    @mentinkfamilyfarms 4 місяці тому +1

    Hey awesome video! After you got the barrel in all the way were you able to move it back and forth by hand? I've got the seals and backwashers in and I'm working through this and it seems like id have to use a pry bar or a hammer to get it to slide. I'm using an aftermarket kit (probably my first mistake) and think the tolerances might not be good.

    • @twocylinderwill
      @twocylinderwill  4 місяці тому

      This set slid back and forth nicely. I’ve had some sets before that we had to always pry forward. I wouldn’t use a hammer to do it though

  • @osi2484
    @osi2484 10 місяців тому

    Well done ....

  • @joshsalentine8570
    @joshsalentine8570 5 місяців тому

    I switched my JD ISO over to the WAPSI, My Deere ISO leaked from day one when I installed several years back. No leaks now.

    • @seth3645
      @seth3645 3 місяці тому

      That's what I am about to do. Wish I wouldn't have spent the money on the JD ones. Junk. My brother did the waspi and it's been trouble free for years

  • @La_GMC_Reaper956
    @La_GMC_Reaper956 3 місяці тому

    Having issues connecting my shredder to this new set up, I can’t get them to go in a lock up. Like can’t get passed the barring part that catches the connection. Not even with a hammer they pop right out.

  • @KyleMorrisCullman
    @KyleMorrisCullman 3 місяці тому

    Just did this and I can’t get the attachments to seat in. Is there a break in trick

  • @teymourpooladvand
    @teymourpooladvand 10 місяців тому

    ❤❤❤❤

  • @SaturnIonRacer
    @SaturnIonRacer Рік тому

    Now make a farming video where we can see the equipment in action

  • @kansascountry970
    @kansascountry970 3 місяці тому

    Have you ever had to replace any of these iso style barrels or replace the o-rings? Looks like that clip holding the barrel in place would be a real pain to get out once these are installed. Just curious

    • @seth3645
      @seth3645 3 місяці тому +1

      It can be. Just did them yesterday and the first one took a bit to figure out the easiest way. The rest were quick.
      I personally wish I wouldn't have done the conversion and kept using adapters. Mine leak badly in no time. I used kit RE206778 but I believe there is a newer style from JD. All the people I know around me have had problems . My brother did the Waspi/Grove kit and it has been trouble free for years.

    • @kansascountry970
      @kansascountry970 2 місяці тому +1

      ⁠@@seth3645thanks for the input. I’ll be doing more research on this now!

  • @rickcagle7619
    @rickcagle7619 2 місяці тому

    There's a better conversion kit out there called The wasp conversion kit

  • @wayneking966
    @wayneking966 Рік тому

    What's the J D part no for the new parts

    • @twocylinderwill
      @twocylinderwill  Рік тому +1

      I read it off in the video and even put it up on the screen

  • @bradjenkins932
    @bradjenkins932 Рік тому

    Why did you convert it?

    • @twocylinderwill
      @twocylinderwill  Рік тому +1

      The Deere couplers are out of date. We do not have any equipment that runs that style, everything is Pioneer(ISO). Sure we could’ve just gotten adapters for this one tractor, but the seals probably would’ve still leaked. So with the new kit I got new seals and don’t have to screw around with adapters

    • @bradjenkins932
      @bradjenkins932 Рік тому

      @@twocylinderwill I don't have any problems with any of mine.

    • @twocylinderwill
      @twocylinderwill  Рік тому +2

      @@bradjenkins932 if that works for you, great! Leave it be. This is what works best for us and our equipment

  • @rickcagle7619
    @rickcagle7619 2 місяці тому

    There's a better conversion kit out there called The wasp conversion kit get that kit and you'll never have another leak like I did on my tractor these two here leak all the time the pioneer is the same as a John Deere the ones I have are just push and pull just like the new tractors it's called The wasp conversion kit

    • @barrynelson634
      @barrynelson634 Місяць тому

      can you provide a link? Know of any videos on the conversion...I prefer that over written instructions. Thanks