Hey great job I replicate almost everything. Can you recommend a link on how to use the stryker specific how to create waypoints and save them First time using a gps like this
2 questions. Why didn’t you mount the sending unit in the front storage compartment? Wouldn’t that read the depth better as approaching obstacles? 2- how does that portacool work ? Worth the price ? I’m about to get one
You can, mounted in the middle because it would always contact water and puts your readout in the middle of your boat. Yes, the portacool works great in my garage in AZ, as long as there isn't much humidity.
love this idea duct seal is what a lot have used for transducer
Thanks for sharing the mounting idea.
Looks good. How long did the total install take approximately? Hours..
a couple hours basically.
Only about an hour and half, could easily be done faster.
Hey great job
I replicate almost everything. Can you recommend a link on how to use the stryker specific how to create waypoints and save them
First time using a gps like this
I'm not actually sure this one does that.
I couldn’t get my transducer to read thru the hull. I tried 2 locations. 2006 Yamaha FX HO.
Different hulls may have problems that mine did not.
So the transducer reads thru the fiberglass? Thanks.
Yes, the only thing I didn't have was water temperature.
2 questions. Why didn’t you mount the sending unit in the front storage compartment? Wouldn’t that read the depth better as approaching obstacles?
2- how does that portacool work ? Worth the price ? I’m about to get one
You can, mounted in the middle because it would always contact water and puts your readout in the middle of your boat. Yes, the portacool works great in my garage in AZ, as long as there isn't much humidity.
Mind sharing link to glove box cover? That’s awesome!!!
www.amazon.com/LZLRUN-Carbon-Fiber-Vinyl-Wrap/dp/B007OXCIB0/ref=sr_1_5?crid=BOR5RXWZ3JGR&keywords=carbon+fiber+vinyl+wrap&qid=1679607753&sprefix=carbon+fiber%2Caps%2C135&sr=8-5
The plastic covering the hole with the tread isn't even aligned from factory :(
Wrong measurement on cup holder man it’s 4 1/2 inch . Bolt was correct 👍
My hole saw was 4 1/4” so you do you. All good.