Tire Pressure Monitoring System TP620 with in car review.
Вставка
- Опубліковано 14 жов 2024
- My new TPMS I just bought for my Vanagon. Unboxing, installation and test drive.
Aliexpress: s.click.aliexp...
US: amzn.to/3sdOl3Z
UK: amzn.to/3u1bbhC
DE: amzn.to/3G6Pe39
SWE: amzn.to/3AA87dz
-------------------------------
Camera I use: amzn.to/2If2VAh
My Spark: amzn.to/2HllmlH
Thanks for the review, I installed the same unit on my Lexus, the annoying down-side is it loses all the settings once you turn off the ignition :( , So. Considering that you played with the HI and LO alarm numbers or converted the pressure unit from Bar to PSI, everything will be back to default if your cigarette lighter isn't having a constant 12v connection.
I don't think mine loses the settings, but I can't be sure.
Yeah I have the same problem :( I have to change it from BAR to PSI everytime I turn the car on.... pretty annoying.
Not that conversion is a big problem, but can you adjust the settings for the American standard psi (per square inch).
1:03 Thats what she said :)
2.5Bar and it shows 2.8-3.0. Question is which one is wrong, gast station or TPMS :)I checked another video where a guy measured with digital gauge and then compared, it was just of with 0.5PSI (less than 0.1 Bar) so likely the gas station needs to check their gauges or it differs between units. I have ordered one, 45Euro is peanuts for this gadget :D
That’s an awesome vanagon!!
Mine has frozen, the readings never change, and I can't find any way to reset it. I charged the unit via the usb, can't think of anything else to do. Any thougts? tia
Hi there. Why always must have 1 sensor takes long times for update reading (30 minutes or so) sometimes quicker. Even 1 sensor will freeze and unpaired, then 5 minutes will automatically repaired and reading back normal. Do you have this symptom? I asked the seller it said normal.
Yes, mine are also like that, maybe not 30 minutes. I have not had any issues with unpairing.
@@Italjohn probably maybe is my car is suv. In the past I purchased 3 different tpms brands and all have this symptom, but different tyre location. This make me believed that all aftermarket tpms like this. 😂. I kept this because it different from other is when it unpair doesn’t create alarm noise (beep beep) like other while driving is annoying. Btw thank from your replied. Good day.
Hi Sir! How can it be reset to Factory Settings? I can't seem to find my instructions. Hope you can help. Thanks in advance
Hi there. I have the manual, but it does not say anything about factory reset. Sorry.
Italjohn13 - Thank you for your reply Sir! Stay Healthy and Safe
I have a question about the internal sensors, so maybe you won't know. But when the tires are rotated, how does that work with the internal sensors since they are much more difficult to change between tires? The display unit doesn't know when the tires are rotated so they would be in the wrong position correct? Thanks :)
Yes that's correct. If you rotate the tire position the internal sensors will follow the tires. That's one drawback with the internal sensors. This is me guessing, as I don't really know. Maybe the sensors can be reprogrammed from the outside, or at the display unit?
Scotty Kilmer said recently, you don't need to rotate tires IF your car doesn't have bad struts or bad alignment. BUT if you do have uneven wear from a car accident bending the frame, or similar, the car's ECU can be put into TPMS relearn mode.
Its a few years ago,but when the sensors are mounted and you are driving,did you notice any vibration(inbalance),and did the noticed if the valves were pulled outwards because of centrifugal forces?(because of the “weight”of the sensors)?
Hi Rabin. The sensors are so light so you won't notice any vibration. I have now upgraded to a newer model with even smaller sensors. I use it daily and have not had any problems so far 🙂
@@Italjohn thank you for your reply,which set do you use now,and do you have link where i can find the newer sensor kit?
I have this one ua-cam.com/video/2LP4miWx6aw/v-deo.html to see the links, press the little arrow to the right under the video
how much time did you wait until all 4 pressure readings appeared?
It took approx 15 minutes give or take 5 minutes.
I welcome your car into the future
Thanks, good man.
Does it lose the settings when you turn off the engine?
No
Can you set the pressure that the alarm comes on?
Yes you can
is that the battery voltage meter?
Yes, you can see the battery voltage as well as the tyre pressure
THANKS
Are they still working after those years?
I change them to an app controlled unit last year. But they where still working when I did the changeover.
эти датчики дороже чем это ржавое корыто