I am brand new to reloading. I purchased much of the same equipment you have but just one die set so far for 45ACP. I have watched many Hornady single stage reloading videos. Lots, and lots of talk, but very little step-by-step this is how you do it. This was THE most helpful youtube for how to go about using the equipment and in what order and why. Thank you, thank you. I feel comfortable now trying it myself. Excellent job!
I find these reloading videos to be very calming and soothing. Kind of like staring at the ocean.... Thanks for the time in making this video kind sir.
Thank you for making and posting this video. I'm in the market for a press as I want to get into reloading. I've been having the hardest time deciding on which single stage or turret press to get and I've made up my mind just by watching your video. This was very informative, no nonsense, clean and simple and pretty clear video. Thanks again!
Thanks for the time you took to make this video. Just getting into reloading myself. I appreciate the explanations and step by steps. Your video helped clear up a few confusing questions I had about single stage reloading. Subscribed.
Very informative I've watched your 9mm and 45 acp reload videos ...also I'm a Hornady guy and like the product ...great vids keep making videos....new future student ,thank you
glad i found your video. It was verry informative for me personally because I am thinkin about getting into reloading my self. Good luck with the channel and I hope to see more good vid's from you. Thanks.
Brandon I'm an experienced reloader but have recently began 45 acp. About 20% do not want to slam shut like they should in the gun. Looking visually at them ...no difference. Maybe the crimping stage needs to be just a bit more snug, over all length is spot on.......thanks. Ted.
New reloader here. I want to commend you on an excellent video. No BS. Straight and to the point. And excellent commentary to boot. Thank you. I will subscribe.
@scooter17568 Well...... it's about time scooter !!!! I do think you will enjoy it. I would like to one day get the auto feeder, but really don't see the need for the hand primer. It's just as simple to me to do it in the press. Although I've never tried one.
Another great reloading video. I can't recall if you had an automatic primer feed in a previous vid but do you prefer to manually put the primer on the seater (if that's a word) over the auto feed that Hornady offers? I'm finally getting the LNL classic kit (for $260--seemed like I couldn't pass that up). It does include both the hand priming system you mentioned you haven't used and the auto feed.
Great video..My experence is with a different 45 as in a 45-70 but I am thinking about reloading pistol ammo and your video was very interesting and helpful. I subscribed to your channel also.
You don't "have" to use a tumbler. The tumbler just cleans the brass for you and makes the casing a little easier to load. The classic press from Hornady is around 160 I think. I'd have to look up the current prices, but they are comparable to the ones from RCBS.
Pretty good video. Looks like you have have a good setup for your reloading. Just one question on your caliper measurement of the loaded round. Between my Hornady and Lee loading manual I show C.O.L. at Max of 1.275" and a Min 1.260" you said 1.232" so your .030" below Min. at that Dim. do you ever have problems with mag feed?: Also your pressures climb when you seat to deep.
@MrCaldwell1985 It is definitely a labor of love. Like I said in the video, it is an escape sometimes from my everyday chores. I'm a software engineer, so some manual labor does me good and is very refreshing and gives me a sense of accomplishment.
Well the rifle cases are "necked" down and they will stretch under pressure. The pistol cases can stretch too but I don't worry too much about it since I only load a case about 10 times.
Great video. Thanks for taking time to help others. I am trying to figure out if I want to reload or not. after the initial cost what exactly is the savings per round for 45 ACP and 9mm? Thanks again for your time.
Getting everything you'll need, to start, is not cheep. I purchased items every few weeks( on sale where ever possible) for 1.5 years so I wouldn't feel the sudden pain of money loss :). save your brass or collect at the gun range and you'll already have that.
WOW thanks, awesome video bro. I finally found someone who actually knows what they're doing ... a lot of idiots are teaching folks to be idiots out there , its sad that common sense isnt too common in the world anymore ,so could you do, or do you have a vid on different types of powder ,mainly for light competition loads vs heavy +P+ for example
Hi Brando, this was a very informative video & I do appreciate the time you took to make it. Quick question for you...was there a particular reason you selected the Hornady press over other brands? Just curious. Thanks again!
Hey thanks for posting that great video! I recently purchased the hornady classic kit and I wasn't familiar with reloading at all but after watching your video I know the basics. There remains one question for: Do I also have to "size" newly bought cases or can I skip that process and go on with the "priming"?
Just a message to all. I handload .223 7.62x25 and .45 acp. For beginners, pistol caliber dies are generally carbide dies which don't require lube. Steel dies do. Another big one is that you WILL NOT SAVE MONEY RELOADING YOU WILL SPEND MORE. You will just shoot more for your money. Lastly, be prepared to lay down a good $200-300 just for the tools alone. Its not a cheap hobby guys.
Couple of questions, when using spent casings, when do you know when to use a tumbler? I mean is there something you see on/in the casing itself?(other than the obvious dirt inside). If I dont have a tumbler, is there another way? Andlastly, what does this press cost?
Question about the primer tool. I'm having a heck of a time removing the "never used before" primer tool that comes with the large pistol primer installed. I want to intall the small attachment. I've tried unscrewing it but it won't budge. Any suggestions?
Brando, I noticed when you're depriming, all the old primers fall into the primer catch. Using the exact setup as yours, none of mine seem to fall into the cup. Some fall in front of, some fall behind. What is that?
@tmirzaian Hey that's awesome. Thanks a lot. It's not all that bad to do. I'm back there now doing some cleaning and heard my email notification go off with your comment. Keep me informed with your progress or if you have any questions, let me know.
Thanks Brando. One question: when I reload, the reloaded round gets "stuck" when I lower the press after I crimp to the necessary dimension of .469. I crimp just enough to obtain necessary dimension. Also, I use the flat bullet seater since I'm using Hornady 185 HP-XTP bullets. I need just a bit of force to lower the press and no apparent damage to case or die. Any idea what is causing the stuck? Thanks, Luis
Depends on your barrel. In Glocks you are not supposed to. You can get lead fouling. (if I spelled that correctly). Look in your owners manual and see if they warn against it. Otherwise you should be ok.
hi im really interested in reloading my own ammo. im not to sure were to start out and what are good products to buy as far as presses and primers to use if theres any way you could email me with what you recommend to use that would be great.
I hear sine people talk about trimming there brass but didn't see you do it. It's it a important a some people make it out to be and do you do it? Thank you!
Stop the swinging of the pan on the scale. The centrifugal force exerted by that swing makes a difference, especially at such low mass. You're probably underloading a bit if you measure with the amount of swing you show in the video.
Sir, you said you check powder drop on the front and back of 50 cases. You are recommending to people to not check powder drops according to industry standards. That is very dangerous!
@76malibuman First of all... thanks for subbing. You are my 300th subscriber. Thanks so much. Second. I don't have any videos on that subject, but you just gave me a new topic.
Like your video , great if your not a high volume shooter . But once you get the hang of this hobby you'll be shooting more and you'll want a progressive press .
I'm getting into reloading and some people have told me not to use lead bullets in my1911. Is there a reason why or should it be ok to use lead round nose in my gun?
Good start, you have a little more learn,get yourself a quality finish cartridge gage. Lyman makes a good one it will teach you more than you may think!
@donthebodyguard LOL I love this comment..... my wife constantly makes fun of how long my "mind numbing" videos are. She says.... "I can't believe you can talk 15 min about a bag" I personally would also rather watch one video vs. watch it in several parts. Thanks again.
im barely getting into reloading and i notice you dont use a case trimmer ? Do i need one for 45 acp im gonna use lee delux die set and i also notice you dont crimp the bullet why is that ?
You should measure your cases after you resize and deprime to make sure the case hasn't exceeded the maximum case length. You "may" have to trim cases, but it's best to check. As for the die set that you use, it's all a matter of preference, but if you were going to use to use the Hornady LNL Dies, you'd either have to own the LNL press or the conversion kit for the press you're using.
Keep in mind that checking case length should be done when resizing as a matter of habit to avoid any issues. Most pistol brass doesn't change much, but my suggestion was more of a general suggestion for someone new to reloading.
For me personally, I spend about 12.50 for 50 x rounds of 45 ACP. You can re-use the 45 acp brass at least 20 times. But I retire mine after shooting 15. I've seen people reload 45 acp brass way past that though.. Brass is what kills you. But if you buy a fresh box once an a while, you're fine!
@BrandoMcWilli Do me a favor and let every one know the possible fatal error of a double charge folks seem to neglect to inform how dangerous this could be
I guess as a hobby this would be ok but not cost efficient for someone who just wants ammo for home protection . I could buy 600 rounds of 230 gr FMJ Winchester for $240
If you're shooting 250 rounds at a gun range every other week or maybe once a month, it's worth getting a reloader. They're pretty cheap for a one stage. For 45ACP, I'm spending technically 12.50 bucks for a box of 50 rounds. I usually re-use my own brass at least 15 times before retiring 'em. If I were to cast my own bullets, I'd safe another dollar.
i like the video. just not the part where you say "umm kkk" all the time. We are watching the video and it is in our interest to listen to what you are saying. We are listening. No need to ask "OK?", no one is going to respond back.
I am brand new to reloading. I purchased much of the same equipment you have but just one die set so far for 45ACP. I have watched many Hornady single stage reloading videos. Lots, and lots of talk, but very little step-by-step this is how you do it. This was THE most helpful youtube for how to go about using the equipment and in what order and why. Thank you, thank you. I feel comfortable now trying it myself. Excellent job!
I find these reloading videos to be very calming and soothing. Kind of like staring at the ocean.... Thanks for the time in making this video kind sir.
Thank you for making and posting this video. I'm in the market for a press as I want to get into reloading. I've been having the hardest time deciding on which single stage or turret press to get and I've made up my mind just by watching your video.
This was very informative, no nonsense, clean and simple and pretty clear video.
Thanks again!
OMG! How simple a fix. Just now tried it with primer tool installed and they ALL went in catch tray. Thanks. :)
Well done, looking forward to reloading my own. You've given me some confidence to take the plunge
Indeed a very informative video on how to reload a .45 ACP using the hornady lock n load classic! More videos bro! Great job!
Thanks for the time you took to make this video. Just getting into reloading myself. I appreciate the explanations and step by steps. Your video helped clear up a few confusing questions I had about single stage reloading. Subscribed.
Good video I’m starting reloading myself !
Great video...Easy to watch, and follow along
Thanks for the info. I'm just starting to loading looks like alot of fun
hey, great job on the video--I truly appreciate the walk through and overview of the processes involved--thanks for sharing your knowledge!
-Michael
Bill Hasch SrGreat job, I'm excited to learn more, thanx!!
Very informative I've watched your 9mm and 45 acp reload videos ...also I'm a Hornady guy and like the product ...great vids keep making videos....new future student ,thank you
glad i found your video. It was verry informative for me personally because I am thinkin about getting into reloading my self. Good luck with the channel and I hope to see more good vid's from you. Thanks.
Brandon I'm an experienced reloader but have recently began 45 acp. About 20% do not want to slam shut like they should in the gun. Looking visually at them ...no difference. Maybe the crimping stage needs to be just a bit more snug, over all length is spot on.......thanks. Ted.
Very well done!
Hi Brando, Probably one of the best reloading video I've seen.24 minutes went by so fast.
Happy Holidays
Great video. I have been thinking of getting into this hobby. Seems fun.
Good video, thanks. Best regards from city of Buenos Aires Argentina
Thanks so much. Glad you are enjoying them.
Great class!! Very informative.
Great video!
New reloader here. I want to commend you on an excellent video. No BS. Straight and to the point. And excellent commentary to boot. Thank you. I will subscribe.
@scooter17568 Well...... it's about time scooter !!!!
I do think you will enjoy it. I would like to one day get the auto feeder, but really don't see the need for the hand primer. It's just as simple to me to do it in the press. Although I've never tried one.
Very Thorough !!!
Another great reloading video. I can't recall if you had an automatic primer feed in a previous vid but do you prefer to manually put the primer on the seater (if that's a word) over the auto feed that Hornady offers? I'm finally getting the LNL classic kit (for $260--seemed like I couldn't pass that up). It does include both the hand priming system you mentioned you haven't used and the auto feed.
Great Video....Thanks for the info
Great video..My experence is with a different 45 as in a 45-70 but I am thinking about reloading pistol ammo and your video was very interesting and helpful. I subscribed to your channel also.
I need to learn how to do this. I shoot a .45 acp Thanks for this video
You don't "have" to use a tumbler. The tumbler just cleans the brass for you and makes the casing a little easier to load. The classic press from Hornady is around 160 I think. I'd have to look up the current prices, but they are comparable to the ones from RCBS.
very helpful video ,thank you
Great video haha I noticed you mentioned blaze for baseball were you talking about the Bakersfield blaze?
Pretty good video. Looks like you have have a good setup for your reloading. Just one question on your caliper measurement of the loaded round. Between my Hornady and Lee loading manual I show C.O.L. at Max of 1.275" and a Min 1.260" you said 1.232" so your .030" below Min. at that Dim. do you ever have problems with mag feed?: Also your pressures climb when you seat to deep.
@MrCaldwell1985 It is definitely a labor of love. Like I said in the video, it is an escape sometimes from my everyday chores. I'm a software engineer, so some manual labor does me good and is very refreshing and gives me a sense of accomplishment.
Well the rifle cases are "necked" down and they will stretch under pressure. The pistol cases can stretch too but I don't worry too much about it since I only load a case about 10 times.
Great video. Thanks for taking time to help others. I am trying to figure out if I want to reload or not. after the initial cost what exactly is the savings per round for 45 ACP and 9mm? Thanks again for your time.
Getting everything you'll need, to start, is not cheep. I purchased items every few weeks( on sale where ever possible) for 1.5 years so I wouldn't feel the sudden pain of money loss :). save your brass or collect at the gun range and you'll already have that.
WOW thanks, awesome video bro. I finally found someone who actually knows what they're doing ... a lot of idiots are teaching folks to be idiots out there , its sad that common sense isnt too common in the world anymore ,so could you do, or do you have a vid on different types of powder ,mainly for light competition loads vs heavy +P+ for example
Great video.
I'm looking at getting into reloading my .45acp and you're video is very helpful. Did you buy your press separate or apart of a kit?
Hi Brando, this was a very informative video & I do appreciate the time you took to make it. Quick question for you...was there a particular reason you selected the Hornady press over other brands? Just curious. Thanks again!
Great video my friend
Hey thanks for posting that great video! I recently purchased the hornady classic kit and I wasn't familiar with reloading at all but after watching your video I know the basics. There remains one question for: Do I also have to "size" newly bought cases or can I skip that process and go on with the "priming"?
Just a message to all. I handload .223 7.62x25 and .45 acp. For beginners, pistol caliber dies are generally carbide dies which don't require lube. Steel dies do. Another big one is that you WILL NOT SAVE MONEY RELOADING YOU WILL SPEND MORE. You will just shoot more for your money. Lastly, be prepared to lay down a good $200-300 just for the tools alone. Its not a cheap hobby guys.
You have to have the little priming tool inserted. It directs the primer into the tray. If not they just fall.
Great video. I did not see that after seating the cartridge being crimped. Do you have to do this with 45 acp? Thanks.
Couple of questions, when using spent casings, when do you know when to use a tumbler? I mean is there something you see on/in the casing itself?(other than the obvious dirt inside). If I dont have a tumbler, is there another way? Andlastly, what does this press cost?
451, but verify that, a reloading manual would be the place to go and it's the first thing you should buy.
Question about the primer tool. I'm having a heck of a time removing the "never used before" primer tool that comes with the large pistol primer installed. I want to intall the small attachment. I've tried unscrewing it but it won't budge. Any suggestions?
Brando, I noticed when you're depriming, all the old primers fall into the primer catch. Using the exact setup as yours, none of mine seem to fall into the cup. Some fall in front of, some fall behind. What is that?
@tmirzaian Hey that's awesome. Thanks a lot. It's not all that bad to do. I'm back there now doing some cleaning and heard my email notification go off with your comment. Keep me informed with your progress or if you have any questions, let me know.
My understanding is, rarely do you ever have to trim straight wall brass.
This is just the most awesome video on reloading .45 ACP that I have ever seen in my whole life!!! Did I win? :D
How is the price of Hornady's reloading products? I've been using RCBS and their stuff is built like a tank.
Thanks Brando. One question: when I reload, the reloaded round gets "stuck" when I lower the press after I crimp to the necessary dimension of .469. I crimp just enough to obtain necessary dimension. Also, I use the flat bullet seater since I'm using Hornady 185 HP-XTP bullets. I need just a bit of force to lower the press and no apparent damage to case or die. Any idea what is causing the stuck? Thanks, Luis
I like ur vids!
Depends on your barrel. In Glocks you are not supposed to. You can get lead fouling. (if I spelled that correctly). Look in your owners manual and see if they warn against it. Otherwise you should be ok.
hi im really interested in reloading my own ammo. im not to sure were to start out and what are good products to buy as far as presses and primers to use if theres any way you could email me with what you recommend to use that would be great.
I hear sine people talk about trimming there brass but didn't see you do it. It's it a important a some people make it out to be and do you do it? Thank you!
Stop the swinging of the pan on the scale. The centrifugal force exerted by that swing makes a difference, especially at such low mass. You're probably underloading a bit if you measure with the amount of swing you show in the video.
I have the primer feeder for the LNL single stage press. It's definitely the tits... really speeds up the priming and expanding step.
OK I'm a bit confused on the bullet size. Would a Colt 1911 Gov't .45 be an acp.45 (451) bullet, or something else? Thanks.
I bought everything separate. Didn't have all the money at the time... so I bought it piece by piece.
Awesome
Does Hornady make a polymer top bullet for reloading?
I saw absolutely no sign of you lubing the cases. Is it not necessary with pistol rounds, or just with your particular die set?
sorry for the delay. I had to use a small set of pliers to turn it off.
Sir, you said you check powder drop on the front and back of 50 cases. You are recommending to people to not check powder drops according to industry standards.
That is very dangerous!
@76malibuman First of all... thanks for subbing. You are my 300th subscriber. Thanks so much.
Second. I don't have any videos on that subject, but you just gave me a new topic.
Like your video , great if your not a high volume shooter . But once you get the hang of this hobby you'll be shooting more and you'll want a progressive press .
Is there any particular reason why rifle loads only and not .45acp? Is it because they don't stretch as much?
I noticed you use the 3 die set.do you think the third die crimps it enough or is the factory crimp die worth the buy?
i seen a kit like this at cabelas im thinkin of buying it i have about 90 brass casings for my 45 and i wanna see if i can learn to reload them
haha awesome man
good job i'm a computer guy too
What brand powder measure are you using?
I'm getting into reloading and some people have told me not to use lead bullets in my1911. Is there a reason why or should it be ok to use lead round nose in my gun?
Good start, you have a little more learn,get yourself a quality finish cartridge gage. Lyman makes a good one it will teach you more than you may think!
Brando, have much savings will you see reloading .45? Box of 50 here costs $21.00. Thanks
@donthebodyguard LOL I love this comment..... my wife constantly makes fun of how long my "mind numbing" videos are. She says.... "I can't believe you can talk 15 min about a bag" I personally would also rather watch one video vs. watch it in several parts. Thanks again.
Need to see how u set up dyes
Thanks a lot !
@rovertri The bullet seating die also crimps the case.
It was the newest version of the Hornady book.
LOL It's a labor of love.... I don't do it to save money...
I'm more interested in the science behind it.
im barely getting into reloading and i notice you dont use a case trimmer ? Do i need one for 45 acp im gonna use lee delux die set and i also notice you dont crimp the bullet why is that ?
You should measure your cases after you resize and deprime to make sure the case hasn't exceeded the maximum case length. You "may" have to trim cases, but it's best to check. As for the die set that you use, it's all a matter of preference, but if you were going to use to use the Hornady LNL Dies, you'd either have to own the LNL press or the conversion kit for the press you're using.
Keep in mind that checking case length should be done when resizing as a matter of habit to avoid any issues. Most pistol brass doesn't change much, but my suggestion was more of a general suggestion for someone new to reloading.
WOW.. Let's boost Hornady shall we.. I love there Bullets.. XTP is my fav.. However the rest of there product line is priced like a hospital bill.. ;)
They are about the same. I think the press was about 10 more than RCBS
what about the crimp?
I actually got mine from Bass Pro shops.
what kind of trays are you using?
They are made by MTM.... got them at Bass Pro.
What's your average cost for that batch or rounds per cartridge?
For me personally, I spend about 12.50 for 50 x rounds of 45 ACP. You can re-use the 45 acp brass at least 20 times. But I retire mine after shooting 15. I've seen people reload 45 acp brass way past that though.. Brass is what kills you. But if you buy a fresh box once an a while, you're fine!
.45 ACP bullets are not crimped because the cartridge headspaces on the case mouth.
@BrandoMcWilli Do me a favor and let every one know the possible fatal error of a double charge folks seem to neglect to inform how dangerous this could be
No crimp?
Dude, don't throw away your brass, you can get money for it to buy more supplies.
I guess as a hobby this would be ok but not cost efficient for someone who just wants ammo for home protection . I could buy 600 rounds of 230 gr FMJ Winchester for $240
If you're shooting 250 rounds at a gun range every other week or maybe once a month, it's worth getting a reloader. They're pretty cheap for a one stage. For 45ACP, I'm spending technically 12.50 bucks for a box of 50 rounds. I usually re-use my own brass at least 15 times before retiring 'em. If I were to cast my own bullets, I'd safe another dollar.
I agree this would be a good reason to reload.
i like the video. just not the part where you say "umm kkk" all the time. We are watching the video and it is in our interest to listen to what you are saying. We are listening. No need to ask "OK?", no one is going to respond back.
I feel that it crimps enough.
I only see the need to trim rifle cases.
Sorry about that