I need to shrink double bass! #2（Guitar Making ASMR)
Вставка
- Опубліковано 1 тра 2022
- This is the making #2 of Andy bass&guitar's original bass model number 3.
Please feel free to comment if you have any questions or messages.
In this video, I first made the body template of the bass.
Then I made the tailpiece to hold the strings and the control box to attach the pots, jacks, etc.
Both were made using a lot of ebony and brass, so it was a lot of work...
Still, I am very happy to see the whole body of the bass.
#1 • I need to shrink doubl...
#3 • I want make double bas...
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ andy_bass_and_guitar
#make
#asmr
#andy_bass_and_guitar
Amazing quality work.
Remarkable work, Andy! It was so satisfying seeing the brass cover snap into the control box with perfection!! Thanks for the share!! 🙏
Thank you!
I really like the control box idea! I'm thinking of a similar approach for future electric guitar builds. Beautiful work!
Thank you!
You have inspired me to make another guitar. I have this beautiful old wood from the 50’s. Going to make a 12 string electric. Thankyou for your great videos! Your work is a blessing!
Thank you!
Wow, das ist Handwerkskunst👍👍👍
Thank you!
I enjoy your videos very much, and I am looking forward to the third part in this series. At the risk of being a busy-body or sounding like a know-it-all, I wanted to mention one thing, and I do this only for your safety. Please do not drill through metal while holding the piece with your other hand. Secure the workpiece in a vise or with a minimum of two clamps. Drill bits can grab metal and cause it to spin.
Trabalho belíssimo
硬そうな黒檀がいいですね
次回も楽しみです
前作の様に プロによる演奏動画も期待してます
硬いですね〜
雰囲気で縞黒檀使いまくって作るのにものすごく苦労しています・・・
演奏は前回は多くの方に弾いていただけたのはタイミングもあるので、どうなりますかね・・・
でも多くの方に弾いていただいていろんな感想がほしいので、三号機もそうなるといいなぁと思います。
Amdy you would be fenders #1 master builder with your own office and hours/salary
whee！
Do get a respirator. You don't want that ebony dust in your lungs!
That is correct.
This ebony tingles just by touching the powder.
And my mask and goggles are perfect!
Thank you!
Hello Andy!!!! i am big fan of your work!!! Actually you inspired me to make videos myself!!!! It would mean allot for me if i could hear your thoughts on my latest Video!!! Thanks allot for your time and for everything you share with us!!!! Cheers, Manos from Greece :)
Pᵣₒmₒˢᵐ 😉