Audi SEAT Skoda VW 2.0 TDI Intake Inlet Manifold P2015 Error Flap Actuator Motor Bracket

Поділитися
Вставка

КОМЕНТАРІ • 60

  • @motorhomelife1355
    @motorhomelife1355 2 місяці тому +2

    I bought this part and as a fully qualified tech fitted it today , remove fuel rail wiring harness then manifold, fit part as supplied refit items then clear code all OK now 👍
    Job took me an hour

  • @NWIE76
    @NWIE76 4 роки тому +3

    Right Guys. I own a 2009 Passat 2.0 TDI with the plastic intake manifold. I have just successfully fitted the X8R Bracket "WITHOUT REMOVING THE INTAKE MANIFOLD!" Took about 5 hours, a few tool modifications, removal of the entire air intake box/housing and a "LOT OF CURSING!"

    • @nNIicCoLA
      @nNIicCoLA 4 роки тому +1

      Did it resolve your issue?

    • @NWIE76
      @NWIE76 4 роки тому

      @@nNIicCoLA Yes it sure did. No P2015 since I did it. Difficult to do without removing the intake manifold but worth it, a lot less hassel than stripping the whole thing down! Hope this helps ♥

    • @ilovepikeys
      @ilovepikeys 3 роки тому +2

      It took 5 hours and you didn't remove the manifold? What the!

    • @SamSam-bf6ir
      @SamSam-bf6ir 3 роки тому

      Hi, are you able to share how you did it without removal of manifold?

    • @NWIE76
      @NWIE76 3 роки тому

      @@SamSam-bf6ir Completely removed Air Breather Box and Battery plus Battery Insulation and Cover. Discnnected/Moved any Pipes or Loom in the way. Then had to modify a Torks Bit to fit into a spanner and then with a lot of patience managed to do it. Ill save ya some trouble however with a link to a guy who does what I did and with a small wrench he bought from Germany which made the job a lot faster for him. Ill go look for it and post a link here so check back....

  • @vwtdis
    @vwtdis 4 роки тому +8

    This is all very well, the three bolts are in a space where I can’t get access to them. I probably need to remove the entire intake manifold which isn’t included in your video. Fitting it on a bench is the easy bit

    • @grahamshillingford8229
      @grahamshillingford8229 Місяць тому

      The video shows the manifold off the car. What does that tell you? 😂😂

  • @raihanmohammedjahirmiah1101
    @raihanmohammedjahirmiah1101 6 років тому +1

    great stuff, i bought one as its easily accessible for UK customers and it worked a treat on my audi a4 b8

  • @air5002
    @air5002 4 роки тому +1

    For others with black pastic manifold having access problems to fit the bracket I have developed a solution that involves changing the hex bolt supplied with the repair bracket for a T30. Other steps may assist you if you can at least get a space above the three motor attachment bolts free so you can get a fine tooth ratchet in there. Shout out if you're one of these folk.

  • @air5002
    @air5002 4 роки тому +1

    I discovered I'm not the only one with a P2017 code after installing a repair bracket and clearing P2015. I have a theory after noticing that the rotation of the actuator lever starts about 20 degrees late. I don't suppose you still have the black plastic manifold in the picture? Its possible there may be a simple solution. If you'd like to explore that with me in the interests of your customers let me know. I am here @BuyersReport if you would like to get in touch

  • @robertp.
    @robertp. Рік тому

    Good video, thx

    • @X8RLtdUK
      @X8RLtdUK  Рік тому +1

      Glad you liked it! - Georgina, X8R Ltd

  • @MrDevelishBoy
    @MrDevelishBoy Рік тому

    Where l can buy one for CAG engine?

  • @walruspolish
    @walruspolish 3 місяці тому

    I didn't replace the existing spring with the new one. Will this cause me any issues?

    • @X8RLtdUK
      @X8RLtdUK  Місяць тому

      Hi, no it will not cause issues. The new spring is supplied simply because the original one is easy to lose. They are exactly the same! - Georgina, X8R Ltd

  • @BLACKHAWKTS
    @BLACKHAWKTS 6 років тому

    Thank you Bro

  • @Harry-eu6pu
    @Harry-eu6pu 4 місяці тому

    2006 Audi A3 2.0 TDI Sportback
    After fitting this did a new code come up for anyone.
    08196 intake manifold intake runner stuck open. I have this code on my car now

    • @X8RLtdUK
      @X8RLtdUK  4 місяці тому

      Hi, sorry to hear you have this code. Did you double check the function on the arm to ensure it is moving properly within the closed point and where the bracket stops the over rotation?

  • @yunimeneses7985
    @yunimeneses7985 4 роки тому

    godd evening ..and thanks for the video i have a question my car is an audi a4 b8 8k.5 TDI 170 cv motor code caha with metal manifold wish is the one i need to buy thanks ..sorry for my english .

  • @insider6495
    @insider6495 3 роки тому

    Hi there. I just fixed the bracket on the v157 motor, erased the p2015 error code, but after 20 min is still on. The CEL keeps coming back on. Put brand bew intake manifold and v157 motor with the bracket, but the CEL still coming on after 20 minutes.

    • @crivion
      @crivion 3 роки тому

      Hi there, did you solve this in end and how? I did the same as you, bracket -> after 2 days it came back. Now I'm afraid to but brand new intake manifold. Let me know

    • @barryrob1978
      @barryrob1978 3 роки тому

      @@crivion I have this same issue. Did you get yours fixed?

    • @crivion
      @crivion 3 роки тому +1

      @@barryrob1978 No - the only remainder is checking the cable between the ECU and Motor.

    • @crivion
      @crivion 3 роки тому +1

      and I also install brand new manifold and motor - don't do it

  • @user-ee7db4ip6j
    @user-ee7db4ip6j 4 роки тому

    Does it matter if i buy plastic or aluminium?

  • @ay4994
    @ay4994 Рік тому

    I have an Audi a4 b8 and It’s easier to remove the manifold.
    Does anyone have any guidance as my fuel economy has gone rubbish after installing this? EML gone off though

    • @X8RLtdUK
      @X8RLtdUK  Рік тому

      Hi, we have not heard of this issue before and is likely to be unrelated. - Georgina, X8R Ltd

  • @georgefarmakis9238
    @georgefarmakis9238 4 роки тому

    What about Skoda Superb petrol 1.8 / 2009 / code CDAA? I have the same "error 2015"

    • @X8RLtdUK
      @X8RLtdUK  4 роки тому

      Hi, please email us or call with your reg or VIN and we can check for you.

    • @cmvainafe1372
      @cmvainafe1372 3 роки тому

      @@X8RLtdUK ho bisogno del pezzo del alumino dove posso comprare

  • @S4_QUATTROPOWER
    @S4_QUATTROPOWER 4 роки тому +1

    Do you have a USA website?

  • @zionopi
    @zionopi 2 роки тому

    dove trovo questo ricambio ? grazie

    • @X8RLtdUK
      @X8RLtdUK  2 роки тому

      Ecco il link: x8r.co.uk/audi/inlet-intake-manifold-repair.html

  • @Dzamal1989
    @Dzamal1989 3 роки тому

    how Can I buy I don't see any link

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      x8r.co.uk/catalogsearch/result/?q=p2015

  • @TihomirSunjic
    @TihomirSunjic 9 місяців тому

    gdje kupiti taj dio

    • @X8RLtdUK
      @X8RLtdUK  9 місяців тому

      Pozdrav, kliknite na vezu u opisu. - Georgina, X8R Ltd

  • @farazsharif2154
    @farazsharif2154 6 років тому

    Were can i order for the plastic manifold

    • @X8RLtdUK
      @X8RLtdUK  6 років тому

      You can order here: x8r.co.uk/audi-seat-skoda-vw-2-0-tdi-intake-manifold-p2015-error-motor-repair-bracket-fix

    • @intestinalworm1202
      @intestinalworm1202 4 роки тому

      Buy from the originator - DieselGeeks.com.

    • @Ahsrkn
      @Ahsrkn 3 роки тому +1

      Merhabalar bunu yapıpta arıza kodundan kurtulan var mı?

  • @Ahsrkn
    @Ahsrkn 3 роки тому

    Merhabalar bunu yapıpta arıza kodundan kurtulan var mı?

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      Hi there, we have had lots of feedback from customers saying the fault has cleared after installing our kit. - Georgina, X8R Ltd

  • @badri0078
    @badri0078 3 роки тому

    Never works with me

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      Hi there, did you purchase the kit and are having issues? If so, please email us at sales@x8r.co.uk

  • @Pitoumotorsport
    @Pitoumotorsport Рік тому

    Ne posez pas cette piece, ce n'est pas durable car le collecteur a du jeu. il existe des entreprises qui refont correctement le collecteur.

    • @X8RLtdUK
      @X8RLtdUK  Рік тому

      Il s'agit d'informations inexactes, notre pièce peut être installée sans causer de problèmes. -Georgina, X8R Ltd

    • @Pitoumotorsport
      @Pitoumotorsport Рік тому

      C'est toi qui le dit...@@X8RLtdUK

  • @felloutube
    @felloutube 11 місяців тому

    tdi 3.0 ??????

    • @X8RLtdUK
      @X8RLtdUK  10 місяців тому +1

      Hi there, we do a kit for the 3.0 TDI. Please see this link for the options available: x8r.co.uk/audi/inlet-intake-manifold-repair.html - Georgina, X8R Ltd