丸鋸ガイド：長い直線を切るガイド冶具の作り方～How to make circular saw guide【自作工房】
Вставка
- Опубліковано 24 вер 2024
- 丸ノコの一番基本的な直線カット冶具です。
コンパネや合板などの長い直線を正確に、そして安全に切断する目的で使用します。
通常、合板のカット部を直接ガイドとして用いるのですが、摩耗のせいなのか、長く使っていると直線が狂ってしまいます。
意外と耐久性がありませんでした。
そこで、耐摩耗性のあるアルマイト処理されたアルミアングルをガイドに用いることにしました。
今回作った冶具は全長1820mm。
このサイズになると金属のアルミアングルがフニャフニャに歪むので墨ツボで直線のラインを引き、そのラインを目安にしてアルミアングルを固定しました。
精度はこの冶具を使って切断した切り口同士を合わせて見たところ、目測で0.5mmに満たない程の隙間ができました。
という事は片側0.25mm以内の誤差という事になります。
精密な切断はできませんがまぁまぁ使い物になる冶具だと思います。
![[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)](http://i.ytimg.com/vi/2UEi-JrOJPQ/mqdefault.jpg)
![[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)](/img/tr.png)
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
I like the simple visual demonstration without talking.
Then it’s a lot of recording, scripting, translation for subtitles for non Japanese audience. His silent video already achieved 95% of the effect. It looks a norm for many fantastic Japanese DIYers’ UA-cam channels.
I like your videos! Thank you! Your ideas are simple but effective and you present all steps without unnecessary noise and someone who is screaming into the video (what they call explaining the steps).
Very nice. Super simple, easy to make and very effective. I’ve been looking at lots of designs on UA-cam. This is how I will build mine. Thanks.
これはとてもいいヒントになります😃
So simple yet so effective. Possibly the best saw guide I've seen.
You are so professional. The training is easy to understand. I like it. Thank you!
I really like the idea, just one thing how you keep the blade intact with aluminum slide rail because if your hand move little bit cut will be messed up. Might want to modify for another rail on the other side to make saw run inside the track.
Pp
Ryobi Japan tools are so much nicer then the American versions.
Beautiful! I wish American power tools weren't noisy(loud). The vast majority of Japanese power tools sound just right 😌👌
Probably lower power. We use ear muffs.
very simple, but very efective. Thanks from Chile
Great idea. No need to buy an expensive track. Interesting scribe and snap line too.
Seen a lot of these jigs but learned something new with this video. Peeling double side tape under the angle is pretty slick.
Muito interessante, já conhecia outros modelos de guia, mas este ficou muito prático e de fácil manuseio.
Now I found the best ASMR video thank you
Your videos are so inspiring! Thanks for sharing your ideas.
Can you tell us where can we find this type of double sided tapes?
Uma boa ideia executada exemplarmente. Parabéns. Desde o Brasil.....
Obrigado aqui do Brasil,🔰 parabéns pelo vídeo! ...👍☺
In my opinion, of all the track saw guide I watch in UA-cam, your design is the best!!!
yes, fast and easy.
all your videos are like poems
Estos vídeos tipo 4k son super , buena guia la voy hacer Saludos desde Ecuador
Great simple easy build! Thank you for sharing!!!
YOUR PROJECTS ARE SO USEFULL YET SO SIMPLE, COULD YOU PLEASE POST A VIDEO OFONE THAT I REALLY LIKED, THE VIACUUM HOLD DOWN TABLEYOU HAD IN ONE OF YOUR VIDEOS? I BUILT A SIMILAR DEVICE MANY YEARS AGO BUT I USED A VERY EVPENSIVE VACUUME PUMP AND YOU USED A SIMPLE AIR COMPRESSER
I like your idea but you're still going off your eye to line up the aluminum to the line. So how can it be dead straight?
I would use a machinist square to index the aluminum extrusion from a factory edge.
It's something not really difficult to make but very handy and very useful of course. I think doing bevel cuts with what you made is probable too -- with some minor adjustment. This inexpensive guide, along with a good 6 to 6 1/2- inch cordless circular saw is much more cost-effective -- ensuring that we don't need those much more expensive track saws on the market. This video does help us to do some savings for some thing more necessary. Thank you so much for sharing.
Doesn’t get any easier than that!!! Awesome
Exactly my thoughts too. So many DIY videos that complicate this simple but very use full tool.
Ésta es una de las ideas más sencillas de construir una guia para sierra circular. Pero, yo opino, que se deberia dejar ó ampliar unos 10 centimetros a la guia central, al comenzar a cortar.. Para que la sierra tenga mejor apoyo.
Nice simple and clean.
Very interesting. I was thinking that I was going to get an aluminium track just like you did, but apparently I have a 6-foot (1830 mm) Starret straight edge lying around. Gonna have to use that then, can't justify buying something else. That thing is so heavy, though. 24 lbs!!!
Your hand made guides boards are really wonderful. What is the material you put black sheet type of staff under the board??? I'd better to put those sheet un der my handmaid staff...
貴殿のガイド板類は素晴らしいですね。 ボードの裏に貼っておられる黒色のシートの材質は何でしょうか？ また 日本の道具は全て素晴らしいですね。 日本に行く際には いつもホームセンターに行きますので 日本から工具を買ってきているんです。
Like your design and the way you manage the whole project. Excellent.
that's a way cooler ryobi color than the lime green in the USA!
I was thinking that as well. It looks like it's better quality too.
Teal is my favorite color. I have all the green Ryobi but I like this color and the color of Makita tools.
Great video with GREAT instructions. Kudos!!
I've made one just like this and i've been using since. Haven't use my table saw until making smaller cuts
Simple and execelent
Simple, but effective. Thank you.
beautiful work you are very good, me and my wife like his creativity.
The other side of the guide could be cut as guide for the smaller side of the baseplate.
Thanks for your comment
I think that it is better not to cut the other side of the guide
It is used when clamping and supporting by time and hand.
Also, I hear that the shorter one of the circular saw base is dangerous when used as a guide.
@@jisakukobo yes.
Just today i had to cut a door using the short side.
I had to do it,but i dont recomend it.
Great video man,very useful information.
I've decided to build this saw guide. Do you think this could be made with an MDF board?
参考になりました
ありがとうございます
コメントありがとうございます。
他にも丸ノコ冶具を作っているので参考になると思いますよ。
今、別の丸ノコ冶具を作っている所です。
1週間以内に公開できると思いますので、是非見てください。
Гениально просто и практично👍✌
Thanks for the easy way of making it
よくある合板を貼り合わせた丸鋸ガイドは端材と一緒にすると、端材なんだか冶具なんだか見分けがつかなくなります。
アルミガイドを使うと一目で道具であることが分かるので作業性がアップします。
これ、結構ポイントが高いと思うのですが、いかがでしょうか？
大工です。マジックで「定規」と書いてます。まず間違いませんよ。
角が欠けたり、途中から刃を下ろす使い方で刃が当たったりして、いずれ使えなくなり捨てます。
糊をつけてエアータッカーで打って切る、のが早くてきがねなく捨てれるよ。
@@銀河哲朗
＞＞いずれ使えなくなり捨てます。
作ってから一年以上たちますが、アルミフレームを利用したものは普通に使う事が出来ます。
実はこのジグを作る前に
海山岩盤さんと同じ方法で合板の端材を使ってジグを作っています。
その時の記事がこちら↓
jisaku-koubou.com/archives/5889
ただ、木で作った物は切りくずがガイドの基準面に付着して精度が悪くなるんです。（直線が出ない）
しかも、木で作ったジグなので木くずが付着しているか分かりません。（迷彩になってしまう）
そして、エッジのダレよりも、基準面の摩耗が気になりました。
確かに、木製の物でも、家のパネルを切る程度なら十分な精度があるのですが、これで家具作りや精密な切断をしようと思うと精度が足りないのです。
現に、なんちゃって小屋を作るときは木のガイドで作り上げています。
しかし、スピーカーや精密なジグを作り始めたとたん、全く役に立たないものになってしまったのです。
後は気分の問題です。
確かにこの道具は消耗品ですが、だからと言って気兼ねなく捨てようなどとは思いません。
角が欠けそうなら丁寧に扱います。刃を途中で下ろして切断するような場合はこのジグは使いません。私ならエッジの無いただの定規を使って切断します。
道具は宝です。私は作品以上に道具の方を大切に扱い、それ以上に、自分自身がケガしないように細心の注意を払って作業しています。
まぁ、私は大工ではありませんが、元金型技術者の独り言です。
Brilliant.. Really well made
Thank you for no music. Very nice video. I really like that Ryobi saw. In the USA Ryobi is not a very good tool.
I agreed. The Ryobi in US are branded and made in China with poor quality control. Here is tghe link to the Japanese made Ryobi saw he uses www.amazon.co.jp/%E3%83%AA%E3%83%A7%E3%83%BC%E3%83%93-RYOBI-%E3%83%81%E3%83%83%E3%83%97%E3%82%BD%E3%83%BC%E4%BB%98-W-663ED-611020A/dp/B00J2JVMFC
Such nice and easy way
Very nicely built and more professional than others using this method. One question. Would the guide be better if you could attach some of the fabric on the bottom of the guide so it doesn't slip? I am not sure what you call the material but it is on the expensive guides you can buy. I am going to build one the same way as you show but look for the material to put on the bottom of the guide. Thank you from Australia.
Gordon Clark this is really late, it’s called friction tape, dewalt makes some you can find it on amazon
@@dmurphy383 Thanks for remembering to post.
el ranchero
buenos videos
construccion
What's the point of this ? the same can be done using just a piece of exactly sawn-off plywood, without any manipulation
Simple diy plus very informative =good job watching from ayala ave makati city philippines shout out pls next video sir i am mawik marcelo of looc romblon province ph always watching your videos gbph
Parabéns fico show
buenos videos
construccion
work#1
Bravo. Mi piace come lavori.
仮止めしてような道具は何てますか？
Great idea, but has one downside compared to a standard track saw rail - you have to always push the saw towards the "mini-fence".
いつも勉強になります！6尺合板を切りたく、今度このガイドを自作したいと思ってるのですが、ネジ穴を開ける前にプッシュ式でキリ穴を空けてました道具がほしいので道具名を教えていただけると助かります！
Very nice!.......Take care, Bluefin.
Super!! en plus leger facile a manipuler merci!!
thanks !!!!!
You have Chinese Ryobi saw while the rest of the world pay alot for Japanese Makita !
It is the freedom of choice.
Ryobi is also a Japanese company same as Makita. They have products make in China and Japan, so is Makita. Most of the Ryobi tools in North America come with light green color and all of them made in China. I believe the blue color circular saw he used made for Japanese market. I never seen blue color from Ryobi in North America
Here is the link for the Japanese's Ryobi that he uses www.amazon.co.jp/%E3%83%AA%E3%83%A7%E3%83%BC%E3%83%93-RYOBI-%E3%83%81%E3%83%83%E3%83%97%E3%82%BD%E3%83%BC%E4%BB%98-W-663ED-611020A/dp/B00J2JVMFC
thank you
Вам должны платить за рекламу скотча! 😁
very nice
wow..really good... thx brother
Какой смысл крепить планку с таким сложным профилем? Любой обычный уголок для этого пригоден. Сложно понять этот ваш фэншуй.
Awesome job
semplice facile veloce, complimenti!
墨ツボのことを英語ではchalk lineというらしいです。
Ordinary_Overlaps
チョークの粉が入ったやつがチョークライン
じゃないの？
素敵なシャツ、私の好きなスタイル。.. :D
What's the double sided tape you use. Most of those I have seen here are quite thick. I.E. Mounting tape.
Irei fazer uma pra mim 🤛🤛🤛🤛🤛
Masterful - loved the video - so insightful
well done
反対側も丸鋸反対(短い方)でカットすれば用途が広がりますよ
それ、やっちゃいけないやつです
Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw.
Muito bom, gostei parabéns.
Hi. Excellent videos. What brand is the double sided tape you use? Most that I have seen here is quite thick as in "mounting tape"
There is a specific double sided tape made for woodworking. It's most commonly called "Turning Tape" You should be able to find it at most any woodworking supply store under that name...
@@jimhansen5395 Thanks for the reply. Unfortunately, the only place in New Zealand to have such a thing is $29 for 75 feet which seems a little excessive to me. Maybe it's called something different here as I have found some tape which looks to do the same job. It will do anyway. Cheers.
👍perfecto!
Nice
Good idea....but its too complicated only for one side guideline.
😂
Sorry...
👍🏻simple and easy to do thx🙏🏻🙏🏻
Berapa harganya yg ukuran 6 inci
hey what's the name of that alluminium profile? where did you bought it?
Nice video zindabad thanks
Muito bom
جميل جدا 👏👏👏👏👏
Awesome
Шесть минут показывал как прикрутить планку к доске?!...джапан стайл.....
You could have used a long piece of wood instead of a piece of metal with a sewer since you would not benefit from it
I hope my words are understandable because I use Google Translate
I think advantage with aluminum the edge is straight and no worry to make it straight with plainer and it is light weight.
Nice.
감사합니다~
Отлично!
Arigatou.
sugoi desu.
Good job buddy , but the expensive aluminium extrusion looks a bit expensive choice for this thing.
بسم الله ماشاء الله فنان
Very nice idea. Your videos are really good. these are make me calm. And If you don't mind I want to make this guide same as you, also make video and upload on youtube. Can I?
Great idea. Do they make Ryobi tools for the Japanese market a higher quality than for US?
hey what kind of saw is that? its so quiet can i buy it from usa?
Ryobi
👌!
Hi! Make a second one, then cut it at 150cm you are left with a 90cm. These two will serve you well.
Mike.
super, leik