Out of all the reviews I watch, You are the only person that I can count on 100% to give honest feedback. In today's world with everyone wanting to be pro staff and field staff shoving things down our throats, You are truly a breath of fresh air when it comes to the hunting industry. Thank you
Great video. I am glad to see GrizzlyStik is continuing to innovate with the insert system to try and get Maximum durability. I really like their stuff. Keep up the good work!
I’m glad to see you had similar but perhaps slightly better results than myself and several of my friends did. We bought test kits, went through the process and each of us ordered a half a dozen shelves and had them cut and install all the hardware. Once the three of us all received our arrows we started spin testing and none of us had three arrows that we’re good either shaft wobble or insert wobbles that we couldn’t seem to fix and all three of us ended up throwing them to the side and returning to our original shafts
Thanks for the review. With as much as those cost it is disheartening to see the half outs not spinning well. I'm going to try Eastons titanoum half outs on their micro diameter Carbon injexion shafts. Easily get to 480 grains with just a standard 100 gr head-you could get the 280 spines, cut them short, put a heavy duty head on it and get to 650 grains real easy
Way good video on these arrows wish I would of came across this before I just purchased a test kit, right out of the box crazy wobble on my knock end, on both arrows? ridiculous in my opinion?!? Day six way better as in spin testing etc. Brian is a stud to work with from day six as well! Please keep up good work and content.
Yea I have a test kit from daysix and they both spin test well. Most .001 shafts I've bought spin better across the batch. Victory has better tolerances on their VXT arrows, but they're micro diameter which I'm not a huge fan of and don't come in as stiff of a spine.
Did you ever put out a review on the Day Six arrows you got? I've really been looking into them for building out my heavier arrow set up. Keep up the great content!
No I haven't. I have a test pack but not a full set, so I'd been hesitant to do a full review based on just 2 arrows. But they are very durable, and I have been pretty impressed with the component system for a micro diameter setup. 3 component systems I like for micros are Daysix, Ethics, and Valkerie. The only downside is that, depending on what you're going for, it could be harder to get FOC into the upper teens than a lighter GPI shaft. Very similar setup to the Vector HMR I just did a video on. But with that comes great durability also.
Probably know this by now but you can add on weights from black eagle rampage and with their tool and add weights from the nock end. Makes tuning great especially if you have a bunch of a particular weightbroadhead you need to use.
What was your favorite arrow to shoot. I’m looking to build a higher foc arrow this offseason and have been leaning towards the grizzly stick, or day six. What is your take on this. I like the concept of GrizzlyStik and the taper and high foc full setup, but heard a lot of good things bout day 6.
Hey just want to let you know I enjoy your reviews. You seem very honest. I have been using the victory VAP With a 150 bishop scientific method But I am thinking of trying the bishop FOC king arrow. But they are very expensive. I know the Bisho is 2.6 GPI lighter than the victory. I would gain speed but lose momentum. What are your thoughts on this. Thank you.
New Sub here Sir. Thank you for your great honest assessment. It seems in this day of the instant upload that everyone is a ‘ expert ‘. I appreciate your work and eagerly await your next post. Cheers, David
I just bought their test pack. Their 240 spine flew way better for me. I want to place an order and try em out and need to decide if I want to go with hot melt or epoxy. Which would you recommend? Also, do you know if they run the new components up front standard or do you have to request them? This review was a little disappointing (in regards to the product performance) to me since I have been literally “buying in” to their system. It just all makes sense. Thanks in advance for the feedback!
Hot melt is likely the better choice. Because of the bonded sleeve you don't really have to worry much about the insert shifting backwards much from impact, and the hot melt will easily allow you to remove or twist the inserts down the road if needed.
Thanks for the quick feedback! I will look into that. This is the type of format where social media is more of a blessing than a curse! I also subscribed to your channel as a thank you for the content. Have a great day!
Thx for review. do you think these would work well using the HIT insert without the aluminum sleeve. Ie like the axis. I have trouble pulling arrows out of bag targets that have the outsert sleeve.
I have this similar arrow build shooting it out of my 2019 Vertix @ 78lbs draw weight and 29" draw length. The only main difference is that I picked to achieve that 650gn weight with using a 200gn broadhead. I tried the 950gn build and it just didn't feel right to me so I went to the 650gn test pack (building for American Bison hunt). One thing I did when I ordered my actual arrows after the test pack was upgraded to the Ethics stainless steel outserts, I think that is a far more robust component for this system. Good informative video!
One of the biggest challenges I've had with micro diameter arrows are that the lighted nock options are not great. Firenock is ok, but very expensive, and many of the other ones lack durability. And I'm a huge proponent of lighted nocks on hunting setups. To a lesser degree, I like how stepping up to a .204 allows you to use a HIT insert and collar so there's less chance of runout or component bending. That said, there are a couple component systems now with .166 that would allow you to do the same. Other than that though the Day6 shafts are very durable which is a big plus for them.
I haven't shot them, but would have to think that at that wall thickness with the steel reinforcement they have to be quite durable. They have come out with a VAP SS too in micro diameter. Pretty much any really thick walled shaft like the Vector HMR, Grizzlystik, or Daysix have been really durable for me. It takes quite a bit to damage one. Sometimes the components then become the weak point as opposed to the shaft. On the flip side though I've never broken one of the Mammoth arrows, which are on the super light GPI side of things, even shooting a shaft without a field point into a wooden target frame. But those shafts are also heavily reinforced with strong components and sleeves, which shows that there's more than one way to achieve high durability.
@@DIYSportsman Thank you for your fast reply! That's for 3-bladed I guess. Wouldn't the orientation matter more on a 2-blade? Shouldn't they be sqare to the bow?
@@antonditt1661 On a traditional bow I will orient them the same for a consistent sight picture. With a compound, I still dont pay it much mind. If you nock tune with the broadheads as a last step, you'll be factoring in any minor planing effects that could be compounding the reaction out of the bow. That said, if it builds confidence, you can orient them the same by rotating the inserts (if it's a hot melt glue). Just ensure they still spin true and hit where they're supposed to.
@@DIYSportsman I used to do quite a lot 3-D shooting over 20 years ago, except it was mostly 2-D that days. Now I resume it, because I will eventually embark on a very, very long journey and have to leave my hunting rifles behind. Luckily a take down recurce is very hard to beat for traveling, shooting it is still/again a pleasure and I have developed some decent stalking skills meanwhile. The only problem is that I have zero experience with broadheads and Germany where I live is about the worst palce on the planet to learn about them. So thank you very much for your input. :-)
@@DIYSportsman thank you and I just realized after watching your video again that you drilled and tapped the HIT inserts to accommodate extra weight? I was actually going to give the grizzlystiks a try using the HIT and the aluminum sleeve as you did but I have no way of drilling or tapping threads in the inserts. I'm only looking to build and arrow around the 550 to 575 grn weight. now that you've told me the sleeve you're using can you tell me which HIT inset to use? I know I'm asking a lot but anyway you could call me on my cell. the heavier arrow setup is something I'm just getting into and I'm getting frustrated. I need to talk to someone who doesn't sell anything and will tell me like it is. if you can't I understand. 337-258-9537
I imagine they still measure via the standard test. And what it gives would be somewhat of an average. But if you were to measure bending stiffened at various points it should be stiffer up front and weaker as you go back.
Why didn't you try out the grizzlystik broadheads with the grizzlystik arrows? Great video though. Very informative. I like how you added actual deer footage of you using the arrows to kill deer. Pretty cool.
On no! Look at all that marrow in the bone going to waste! (Being sarcastic) I do recommend trying it though, if you haven't! Pretty tasty stuff! Goes good on toast too!
@@bobbycampbell175 Most of my hunting is whitetail. I strongly prefer to keep shots under 30 if possible due to how much they can alter shot placement by moving, but regularly practice with broadheads to 70yds. On a western hunt I wouldn't hesitate to take a longer shot if conditions were right.
@@DIYSportsman I hunt whitetail also but it seems alot of my deer are 50yrds I cant bait because I hunt public land I usually have to take what I can get
@@bobbycampbell175 I'm in the same boat as far as public and no bait. Usually my shot opportunities are between 8-25 yards based on the setup, but it's also with thicker habitat and fairly well defined travel routes. If you see some of the whitetail hunts on my channel that will give a good idea of habitat type and setup to allow for shorter shots.
My test kit was amazing best arrows I’ve shot . Placed it order. Received a dozen poorly put together arrows . Horrid customer service . Damaged inserts . List goes on . Never again .
I think both accuracy and penetration have more to do with the overall setup than the shaft itself. I wouldn't say accuracy potential is any better or worse than many other shafts on the market, which is the say it will take a really, really good shooter to notice a difference. This same arrow at say, a 240 spine and 300 grains up front will certainly penetrate much better than the 320 spine with 175 grains up front, but there are tradeoffs with trajectory.
OK, they can cost more, but not double. And their components sucked I know three different people including myself that bought them and all of us had at least three wobbles out of six. Long story short all three of us threw them in the trash and went back to our old arrows
DIY Sportsman I love to hit system, I have used it for years and I use a footer/sleeve as well. I just tried the ethics insert out certain system on my new black eagle rampages and they seem to work nicely. I have yet to hunt with them
Out of all the reviews I watch, You are the only person that I can count on 100% to give honest feedback. In today's world with everyone wanting to be pro staff and field staff shoving things down our throats, You are truly a breath of fresh air when it comes to the hunting industry. Thank you
Totally agree! Keep it up!
Hey nice shirt!
Do you guys know each other? Hahaha
Great video. I am glad to see GrizzlyStik is continuing to innovate with the insert system to try and get Maximum durability. I really like their stuff. Keep up the good work!
I’m glad to see you had similar but perhaps slightly better results than myself and several of my friends did. We bought test kits, went through the process and each of us ordered a half a dozen shelves and had them cut and install all the hardware. Once the three of us all received our arrows we started spin testing and none of us had three arrows that we’re good either shaft wobble or insert wobbles that we couldn’t seem to fix and all three of us ended up throwing them to the side and returning to our original shafts
Old video but I just had this happen. Quality is poor and man it's dissapointing for the cost.
Thanks for the review. With as much as those cost it is disheartening to see the half outs not spinning well.
I'm going to try Eastons titanoum half outs on their micro diameter Carbon injexion shafts.
Easily get to 480 grains with just a standard 100 gr head-you could get the 280 spines, cut them short, put a heavy duty head on it and get to 650 grains real easy
Looking forward to seeing what you think of the Day Six arrows.
Keep up the good work!!! Can’t wait to see your results on all the other arrows you have lined up for testing!!!
Way good video on these arrows wish I would of came across this before I just purchased a test kit, right out of the box crazy wobble on my knock end, on both arrows? ridiculous in my opinion?!? Day six way better as in spin testing etc. Brian is a stud to work with from day six as well! Please keep up good work and content.
Yea I have a test kit from daysix and they both spin test well. Most .001 shafts I've bought spin better across the batch. Victory has better tolerances on their VXT arrows, but they're micro diameter which I'm not a huge fan of and don't come in as stiff of a spine.
Did you ever put out a review on the Day Six arrows you got? I've really been looking into them for building out my heavier arrow set up. Keep up the great content!
No I haven't. I have a test pack but not a full set, so I'd been hesitant to do a full review based on just 2 arrows. But they are very durable, and I have been pretty impressed with the component system for a micro diameter setup. 3 component systems I like for micros are Daysix, Ethics, and Valkerie. The only downside is that, depending on what you're going for, it could be harder to get FOC into the upper teens than a lighter GPI shaft. Very similar setup to the Vector HMR I just did a video on. But with that comes great durability also.
Probably know this by now but you can add on weights from black eagle rampage and with their tool and add weights from the nock end. Makes tuning great especially if you have a bunch of a particular weightbroadhead you need to use.
What was your favorite arrow to shoot. I’m looking to build a higher foc arrow this offseason and have been leaning towards the grizzly stick, or day six. What is your take on this. I like the concept of GrizzlyStik and the taper and high foc full setup, but heard a lot of good things bout day 6.
Hey just want to let you know I enjoy your reviews. You seem very honest.
I have been using the victory VAP
With a 150 bishop scientific method
But I am thinking of trying the bishop FOC king arrow. But they are very expensive.
I know the Bisho is 2.6 GPI lighter than the victory. I would gain speed but lose momentum.
What are your thoughts on this.
Thank you.
Have you created a quiver mounted to your stabilizer? If so I think that would be a great diy video. I enjoy all of your content
Yes, I plan to make a video on it.
Ive been looking for pierce platinum reviews. Hope i can find it soon as there seems to be a shortage of arrows.
New Sub here Sir.
Thank you for your great honest assessment.
It seems in this day of the instant upload that everyone is a ‘ expert ‘.
I appreciate your work and eagerly await your next post.
Cheers,
David
Been using hot melt for years on my compound arrows. I just buy aftermarket longer inserts. 40-100gn. Aluminum, steel, brass. Never had one come out.
Very thorough and honest review.. Well done Sir..
Im a fan of Day 6 arrows. I'll be running them 2020
Excellent as always , thank you !
I just bought their test pack. Their 240 spine flew way better for me. I want to place an order and try em out and need to decide if I want to go with hot melt or epoxy. Which would you recommend? Also, do you know if they run the new components up front standard or do you have to request them? This review was a little disappointing (in regards to the product performance) to me since I have been literally “buying in” to their system. It just all makes sense. Thanks in advance for the feedback!
Hot melt is likely the better choice. Because of the bonded sleeve you don't really have to worry much about the insert shifting backwards much from impact, and the hot melt will easily allow you to remove or twist the inserts down the road if needed.
Also I'm not sure if the new components are standard. It would probably be best to send them a message first to ask before ordering.
Thanks for the quick feedback! I will look into that. This is the type of format where social media is more of a blessing than a curse! I also subscribed to your channel as a thank you for the content. Have a great day!
If y'all think about it, 254 dollars for 6 arrows with broadhead and lighted nocks is actually pretty cheap.
Thx for review. do you think these would work well using the HIT insert without the aluminum sleeve. Ie like the axis. I have trouble pulling arrows out of bag targets that have the outsert sleeve.
I personally wouldnt use HITs without a sleeve. Even on the Axis. They're prone to tearing out the sides on hard, angled impacts unsupported.
I have this similar arrow build shooting it out of my 2019 Vertix @ 78lbs draw weight and 29" draw length. The only main difference is that I picked to achieve that 650gn weight with using a 200gn broadhead. I tried the 950gn build and it just didn't feel right to me so I went to the 650gn test pack (building for American Bison hunt). One thing I did when I ordered my actual arrows after the test pack was upgraded to the Ethics stainless steel outserts, I think that is a far more robust component for this system. Good informative video!
Why didn't you go with day 6 arrows.small continuous diameter. I like your hunting video's.
One of the biggest challenges I've had with micro diameter arrows are that the lighted nock options are not great. Firenock is ok, but very expensive, and many of the other ones lack durability. And I'm a huge proponent of lighted nocks on hunting setups. To a lesser degree, I like how stepping up to a .204 allows you to use a HIT insert and collar so there's less chance of runout or component bending. That said, there are a couple component systems now with .166 that would allow you to do the same. Other than that though the Day6 shafts are very durable which is a big plus for them.
hey garrett have you tried the victory xtorsion arrows? just wondering what your thinking for 2020 for tougest arrow shaft
I haven't shot them, but would have to think that at that wall thickness with the steel reinforcement they have to be quite durable. They have come out with a VAP SS too in micro diameter. Pretty much any really thick walled shaft like the Vector HMR, Grizzlystik, or Daysix have been really durable for me. It takes quite a bit to damage one. Sometimes the components then become the weak point as opposed to the shaft. On the flip side though I've never broken one of the Mammoth arrows, which are on the super light GPI side of things, even shooting a shaft without a field point into a wooden target frame. But those shafts are also heavily reinforced with strong components and sleeves, which shows that there's more than one way to achieve high durability.
What end of the arrow did you end up cutting off and why?
Where can I find the aluminum sleeves you’re using along with the HIT inserts? I’ve got brass HIT inserts, just can’t find the sleeve.
I cut up an Easton X7 eclipse arrow with a small tubing cutter.
How do you get your broadheads orientated all the same when you glue the insert and then make the nock decide how it is rotated?
I dont worry about which direction the broadhead is oriented. All I am worried about is consistent flight, which I can achieve by turning nocks.
@@DIYSportsman Thank you for your fast reply! That's for 3-bladed I guess. Wouldn't the orientation matter more on a 2-blade? Shouldn't they be sqare to the bow?
@@antonditt1661 On a traditional bow I will orient them the same for a consistent sight picture. With a compound, I still dont pay it much mind. If you nock tune with the broadheads as a last step, you'll be factoring in any minor planing effects that could be compounding the reaction out of the bow. That said, if it builds confidence, you can orient them the same by rotating the inserts (if it's a hot melt glue). Just ensure they still spin true and hit where they're supposed to.
@@DIYSportsman I used to do quite a lot 3-D shooting over 20 years ago, except it was mostly 2-D that days. Now I resume it, because I will eventually embark on a very, very long journey and have to leave my hunting rifles behind. Luckily a take down recurce is very hard to beat for traveling, shooting it is still/again a pleasure and I have developed some decent stalking skills meanwhile. The only problem is that I have zero experience with broadheads and Germany where I live is about the worst palce on the planet to learn about them. So thank you very much for your input. :-)
Love the T-shirt! 👍
what sleeve did you use with the HIT insert on the one arrow you were showing? thanks for the review!!
Easton X7 Eclipse 2114.
@@DIYSportsman thank you and I just realized after watching your video again that you drilled and tapped the HIT inserts to accommodate extra weight? I was actually going to give the grizzlystiks a try using the HIT and the aluminum sleeve as you did but I have no way of drilling or tapping threads in the inserts. I'm only looking to build and arrow around the 550 to 575 grn weight. now that you've told me the sleeve you're using can you tell me which HIT inset to use? I know I'm asking a lot but anyway you could call me on my cell. the heavier arrow setup is something I'm just getting into and I'm getting frustrated. I need to talk to someone who doesn't sell anything and will tell me like it is. if you can't I understand. 337-258-9537
Which spine calculator did you use?
Thanks for another great video!
Great review 👏
🤔 how dow you think they spine test a tappered shaft?
I imagine they still measure via the standard test. And what it gives would be somewhat of an average. But if you were to measure bending stiffened at various points it should be stiffer up front and weaker as you go back.
What 3 blade broadheads are you running?
I was using Bishop Holy Trinity.
Get a heat gun or a long field tip and he a t it, the glue will burn off then cut 1 to 1/2 inch off try again.
Why didn't you try out the grizzlystik broadheads with the grizzlystik arrows? Great video though. Very informative. I like how you added actual deer footage of you using the arrows to kill deer. Pretty cool.
I already had plenty of really good heads so I didn't feel the need to order the Grizzlystik ones at the time.
On no! Look at all that marrow in the bone going to waste! (Being sarcastic) I do recommend trying it though, if you haven't! Pretty tasty stuff! Goes good on toast too!
What maximum distance do you shoot
For practice or hunting?
@@DIYSportsman hunting I hunt public land and I have alot of shots that are over 50 which I've harvested them
@@bobbycampbell175 Most of my hunting is whitetail. I strongly prefer to keep shots under 30 if possible due to how much they can alter shot placement by moving, but regularly practice with broadheads to 70yds. On a western hunt I wouldn't hesitate to take a longer shot if conditions were right.
@@DIYSportsman I hunt whitetail also but it seems alot of my deer are 50yrds I cant bait because I hunt public land I usually have to take what I can get
@@bobbycampbell175 I'm in the same boat as far as public and no bait. Usually my shot opportunities are between 8-25 yards based on the setup, but it's also with thicker habitat and fairly well defined travel routes. If you see some of the whitetail hunts on my channel that will give a good idea of habitat type and setup to allow for shorter shots.
My test kit was amazing best arrows I’ve shot .
Placed it order. Received a dozen poorly put together arrows . Horrid customer service . Damaged inserts . List goes on .
Never again .
They really were that bad? I was thinking about getting the test kit
Still wobbling
How much more penetration? Are they that much more accurate?
I think both accuracy and penetration have more to do with the overall setup than the shaft itself. I wouldn't say accuracy potential is any better or worse than many other shafts on the market, which is the say it will take a really, really good shooter to notice a difference. This same arrow at say, a 240 spine and 300 grains up front will certainly penetrate much better than the 320 spine with 175 grains up front, but there are tradeoffs with trajectory.
recycled fishing rod blanks
30 years ago they sold these
OK, they can cost more, but not double. And their components sucked I know three different people including myself that bought them and all of us had at least three wobbles out of six. Long story short all three of us threw them in the trash and went back to our old arrows
I like the HIT inserts and sleeves as a system. Didn't have any break or wobble all year. I guess they offer them with Ethics as an option now.
DIY Sportsman I love to hit system, I have used it for years and I use a footer/sleeve as well. I just tried the ethics insert out certain system on my new black eagle rampages and they seem to work nicely. I have yet to hunt with them