Cheers for the disassemble. My A button got soggy and would only register hard presses which doesn’t make for good play. Whipped the button out and stuck a 3mm square of thick tape onto the base of the button to make sure A made firm, direct with the micro switch. Hardest bit was getting that damned ribbon cable back in! 👍
Thanks so much. My trigger broke and was trying to disassemble it to fix it and was trying so hard to pull it apart just to find out there were more screws under the sticker lol
Bruh my trigger just snapped I found this vid took it apart tried searching for a spares and repairs one for parts seen 2 with the exact same problem same place 😂
Quick question, does the board have silkscreening on it so I could fathom out button locations on the traces and such ? I have a few rapid fire kits kicking around I want to test.
@Craigs_Garage No problem, I've just picked mine up today and quite underwhelming is the battery life how is yours? I hate it when it's advertised 30hrs but in reality I get 5.
@KarlDavies-dn3eg works okay i now have a new problem were it wont carge on the pad. It sayes the battey is low like almost dead then when i put it on the pad to charge is got to 100% right away and wont take any charge even if i leave it there so i have to use it pluged in.
Im not sure what my daughter did to my controller but the right thumb stick no longer stays in place any way to show how to replace joystick or if theres something i can do
I have no clue ive given up on my controller. I will not charge anymore. I put it on the charge pad and says 100% right away. Still works if it wired in.
my left bumper is hit and miss , doesn't always activate only with too much pressure or in the corner.. Even then i cant keep it to be consistent. Is this from being a lemon or something getting in the way of the left bumpers button? Before i take apart. Trigger also started also is constantly pressing down 5-12%... Unusable now just like my 2 series controllers but their issue is stick drift.. Was the issue with ur bumper seem similar? Any advice as I love the controller when it works thanks for the vid
@@Craigs_Garage think s i get New one one garantie think you mister client lol now Get 2 turtle beatch 1 a need hard pusch that for black ops and New one for fifaa
Cheers for the disassemble. My A button got soggy and would only register hard presses which doesn’t make for good play. Whipped the button out and stuck a 3mm square of thick tape onto the base of the button to make sure A made firm, direct with the micro switch.
Hardest bit was getting that damned ribbon cable back in! 👍
Im glad it helped
Thanks so much. My trigger broke and was trying to disassemble it to fix it and was trying so hard to pull it apart just to find out there were more screws under the sticker lol
Not a problem. Thats why i made the video. Its a weird setup in my opinion. But im glad it helped
Bruh my trigger just snapped I found this vid took it apart tried searching for a spares and repairs one for parts seen 2 with the exact same problem same place 😂
My trigger broke too, what did you do to fix it
This is a little more then what I was thinking. Just to get to my Xbox guide button. My is non responsive now
Respect bro ❤
Quick question, does the board have silkscreening on it so I could fathom out button locations on the traces and such ? I have a few rapid fire kits kicking around I want to test.
That one i do not know that is a good question, sorry.
@Craigs_Garage No problem, I've just picked mine up today and quite underwhelming is the battery life how is yours? I hate it when it's advertised 30hrs but in reality I get 5.
@KarlDavies-dn3eg works okay i now have a new problem were it wont carge on the pad. It sayes the battey is low like almost dead then when i put it on the pad to charge is got to 100% right away and wont take any charge even if i leave it there so i have to use it pluged in.
Playing lies of p and my L2 button broke 😂
Yeah im staring to think that the controller is not worth it. I think im just gonna make a fallout themed controller
Im not sure what my daughter did to my controller but the right thumb stick no longer stays in place any way to show how to replace joystick or if theres something i can do
I have no clue ive given up on my controller. I will not charge anymore. I put it on the charge pad and says 100% right away. Still works if it wired in.
@Craigs_Garage damn ok do I need to take off the whole thing to replace joysticks?
my left bumper is hit and miss , doesn't always activate only with too much pressure or in the corner.. Even then i cant keep it to be consistent. Is this from being a lemon or something getting in the way of the left bumpers button? Before i take apart. Trigger also started also is constantly pressing down 5-12%... Unusable now just like my 2 series controllers but their issue is stick drift.. Was the issue with ur bumper seem similar? Any advice as I love the controller when it works thanks for the vid
Yeah no problem happed it helped
Yeah I'm not to savy when it come to electronics so for the problems your facing I don't know how to fix them.
Might have to give this a try as my controller's A button is squeaky as!
Need to clean the dpad. How do I get to that? Just need to clean it up it's sticky
Honestly thats a good question. If it were me i would probably go to someone a little better then Me lol.
@@Craigs_Garage 😂. No problem!! I'm trying the warranty first. They have a 1year warranty, so before I try to open it, I'm trying that 😂😆
Okay sounds good. Best of luck.@justbecause7077
@@Craigs_Garage thank you!!
Did you try resetting it on the reset button? Or recalibrating all of your bumpers, sticks. And triggers?
No I dint I just got the controller and I changed the joystick out the. My problem happened on the controller.
Do you know anything about the battery? like where its from or the spec or anything?
Sadly i do not. I thunk mine is not charging anymore. Or its just freaking out on the charging pad
My left stick won’t turn left how can I fix’s this problem?
Does it Turn all the way left or is it not registering? Left.
My rubber panels came off what do I do
Thats a good question. I sadly dont have a good answer. Does it look like it was glued on?
@Craigs_Garage I carnt even tell doesn't even look like it fits back correctly no idea how to get it on
I have boton A loose sensibilty need press hard to make passe. How can i fix it please
Honestly i have no clue im not a master with controllers lol. That one you would have to look up. Sorry.
@@Craigs_Garage think s i get New one one garantie think you mister client lol now Get 2 turtle beatch 1 a need hard pusch that for black ops and New one for fifaa
@@walidbrik4413you got parts now lol
Mine dosnt turn on tryed everything to reset it any suggestions??
Does it turn on when its pluged in?
My A button keeps on not clicking whilst I press on it. I think red dead destroyed my pad!! 😂
Give it six months for the software to poop out like it did on the wired version
Mine has been doing good other then the problem i had in the video. Was the wired one bad?