I saw you have a white and yellow light available but would like to get it to look amber like the trx scoop lights. Do you recommend tinting over a white light or over the yellow with some lamin x amber film? Or will you guys be making an amber one? Thanks love the video will definitely order one!
Just to clarify, the purpose of the yellow lights is not to match the existing amber markers, it is to provide the wavelength that creates the highest level of functional driver visibility in fog and snowy conditions. If you wanted to add amber film over the lens it would be best to start with the clear one.
@@rmn6179 i like that it blends in nicely with the front of the truck has a factory installed look also very bright. Although I will be adding the rambar for rearward facing spotlights for setting up campsites and such.
Here is a thread with lots of info and feedback: www.ram-trx.com/threads/exclusive-groupbuy-flush-mount-integrated-led-light-bar-for-trx-front-bumper.4404/page-7
I’m very interested in buying this but I noticed that there was still a slight gap on the right side (driver side) of the bar in the video here: 5:21. Does it not sit flush all the way around?
Could be the angle or a shadow but its flush all the way around. We 3D scanned the bumper and built the bar housing from that so its a perfect fit. You can see more photos on our site of the fitment www.oraclelights.com/products/trx_flush_bar
Yes, it is adjustable up or down by a couple degrees once installed but since this is designed specifically for the DT Ram the light works out the box without the need for adjustment.
@@sensei2121 sure you can watch this video or click the link in the description to go to our site, lots of good photos there. ua-cam.com/video/MEpXd2jf6bg/v-deo.html
@@ORACLElights yeah I saw those, unfortunately there is not one scene of the camera in the driver's seat looking out the front window at the illumination from that light bar. Everything is external. Can you make a video with that view from inside the truck?
Thanks for the input. I personally been running this on my TRX for over a year. Hauling heavy loads (tractors) in the summer heat have zero increase on engine temps with the light bar in place vs without. After over 2000 units sold not a single report of higher engine/ coolant/oil temps due to lack of airflow.
Ugh not a fan of drilling holes in my $100k truck… just for the simple fact if I want it removed or if I sell and new owner wants it removed. Such decisions
Well technically you are drilling into a $400 bumper not a $100K truck so don't get worked up over it ;) If you want to take it off in the future you can drop in a set of panel plugs and its not even noticeable. I would be more concerned with the 4 big hideous holes in the bumper for the front plate, lol.
@@ORACLElights hahaha. Right. And yea def would replace the bumper instead of plugs…. Just the idea. I like the style as it looks like it could’ve came from the factory. I would like a tinted bar so it doesn’t stick out as much…. I’ve wanted to put one behind the grill but haven’t found one that works.
@@tw8644 plugs would not look bad honestly. But don't know why you would ever want to take it off, it looks great and works even better. You can apply tint over the lens if you want it to blend it a bit more something like this www.amazon.com/Lamin-x-Gunsmoke-Universal-Light-Cover/dp/B06XX74HHL/ref=sr_1_5
My neighbor has one for his Trx, always look at it when I walk/drive by
Looks sick as hell
This looks like it would fit my 2016 Rebel! I’ve compared the bumpers side by side, and that lip piece is exactly the same.
We believe it will but we have not been able to install on one yet to confirm. If you do install it please let us know!
Love that . I’m gonna get it for mine
I have a 2019 Warlock. The front grill is the classic wonder if it will fit.
Yes, fits the Warlock as well 👍
If you guys ever make one of these compatible with Colorshift, oh boy...
hey thanks guys😆👍..i forward this vid to the group buy gang at "5th gen Ram forum"🤩😍👍
Awesome thank you!
@@ORACLElights ua-cam.com/video/A1343V2x-J4/v-deo.html
Will this fit a 2021 ram 1500 warlock?
The bumper does not appear to be any different from the Rebel so should fit.
I saw you have a white and yellow light available but would like to get it to look amber like the trx scoop lights. Do you recommend tinting over a white light or over the yellow with some lamin x amber film? Or will you guys be making an amber one? Thanks love the video will definitely order one!
Just to clarify, the purpose of the yellow lights is not to match the existing amber markers, it is to provide the wavelength that creates the highest level of functional driver visibility in fog and snowy conditions. If you wanted to add amber film over the lens it would be best to start with the clear one.
@@ORACLElights gotcha ok thanks for the response!
Installed one on my trx it was the easier than washing it 🤣
Haha awesome! Feel free to leave us a great review: g.page/r/CVfc5DSP-w3ZEAg/review
😂👍
Likes/Dislikes? Any issues....
@@rmn6179 i like that it blends in nicely with the front of the truck has a factory installed look also very bright.
Although I will be adding the rambar for rearward facing spotlights for setting up campsites and such.
Hahaha for real it takes me an entire day to wash mine
Does it normally come with the extended wire plus connector? It seems like hou take it out the box with it. But mine doesn’t have it.
Will this light bar work on the Power Wagon front bumper
I’m not sure if I should get amber or white?
where can i find the no drill hardware?
Does it effect the front camera at all?
No, not at all. We were very aware of this during the design process an designed it to not interfere with the camera view.
@ORACLElights perfect. Cause Rebel has the RAM logo lower than the TRX, and so is the camera.
Where does wire connect to so it will turn on with foglights?
You can connect to the fog light wires or an Aux switch if your vehicle is equipped.
@@ORACLElights does it come with a on and off switch? To turn it on individually?
@@idontcaresapo8233 sold separately its PART #2088-504
@@ORACLElights thank you I purchased the bar with the amber and harness together
Do you have anything for regular ram 1500 with out th rebel grill
Anything with same concept available for the TRX?
This product is designed for the TRX.
Very interested in putting on my Rebel. Not finding too many customer reviews on product and/or any issues? How happy or disappointed one might be....
Here is a thread with lots of info and feedback: www.ram-trx.com/threads/exclusive-groupbuy-flush-mount-integrated-led-light-bar-for-trx-front-bumper.4404/page-7
Why would you get the yellow instead of the white or what would you get the white instead of the yellow??
Yellow is generally used in places with common fog or snowfall because the yellow reflects less off of fog and snow.
@@ORACLElights I ended up ordering the yellow because I live in New England. But thank you
I’m very interested in buying this but I noticed that there was still a slight gap on the right side (driver side) of the bar in the video here: 5:21. Does it not sit flush all the way around?
Could be the angle or a shadow but its flush all the way around. We 3D scanned the bumper and built the bar housing from that so its a perfect fit. You can see more photos on our site of the fitment www.oraclelights.com/products/trx_flush_bar
@@ORACLElights thank you!
I'm assuming the lightbar is removable if I wanted to paint the housing?
Yes there are 2 bolts to remove and it comes right out.
@@j_hart_5048 Awesome TY
Can you adjust the angle of the light bar once it’s installed (e.g., if it’s too low or too high), or is it permanently set at the installed angle?
Yes, it is adjustable up or down by a couple degrees once installed but since this is designed specifically for the DT Ram the light works out the box without the need for adjustment.
@@ORACLElights Installation was effortless. And alignment, as you said, is perfect without needing adjustment. Thanks!
@@MichaelHarley Glad to heart that! Enjoy!
What rims do you have on the jeep in the background?
Well that’s a Bronco (not a Jeep), so that may help narrow your search
Any idea how to wire it directly to your highbeams??
You would need to tap the + wire on the factory high beam and use it as a trigger off a relay to switch on and off.
7/16 bit?? thanks. Real popular choice there lol
Will this block airflow?
No, extensive testing was done while towing heavy loads and no increase in engine temp was found.
Would love to see the illumination from inside the cab.
Sure, here you go: ua-cam.com/video/EFpTTOa7WbQ/v-deo.html
@@ORACLElights no I meant I want to see what those LED lights on the bumper look like from inside the cab and how they light up the road.
@@sensei2121 sure you can watch this video or click the link in the description to go to our site, lots of good photos there. ua-cam.com/video/MEpXd2jf6bg/v-deo.html
@@ORACLElights yeah I saw those, unfortunately there is not one scene of the camera in the driver's seat looking out the front window at the illumination from that light bar. Everything is external. Can you make a video with that view from inside the truck?
@@sensei2121 you can see what you are looking for in the images here www.oraclelights.com/products/trx_flush_bar
That is covering too much air intake.
Thanks for the input. I personally been running this on my TRX for over a year. Hauling heavy loads (tractors) in the summer heat have zero increase on engine temps with the light bar in place vs without. After over 2000 units sold not a single report of higher engine/ coolant/oil temps due to lack of airflow.
Ugh not a fan of drilling holes in my $100k truck… just for the simple fact if I want it removed or if I sell and new owner wants it removed. Such decisions
Well technically you are drilling into a $400 bumper not a $100K truck so don't get worked up over it ;) If you want to take it off in the future you can drop in a set of panel plugs and its not even noticeable. I would be more concerned with the 4 big hideous holes in the bumper for the front plate, lol.
@@ORACLElights hahaha. Right. And yea def would replace the bumper instead of plugs…. Just the idea. I like the style as it looks like it could’ve came from the factory. I would like a tinted bar so it doesn’t stick out as much…. I’ve wanted to put one behind the grill but haven’t found one that works.
@@tw8644 plugs would not look bad honestly. But don't know why you would ever want to take it off, it looks great and works even better. You can apply tint over the lens if you want it to blend it a bit more something like this www.amazon.com/Lamin-x-Gunsmoke-Universal-Light-Cover/dp/B06XX74HHL/ref=sr_1_5
@@ORACLElights yea I prob wouldn’t remove it if bought it. But just thinkn for the next owner… And yea that would work for tint.
I thought the same thing. On the other hand I figured if I ever removed it I would just put push style rubber caps in the holes.