Buy an Infraction here - bit.ly/34GFScc Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.com/custlink/mD33VJz8zU It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!
I would like to see a video difference between punch level 4 and level 8 or 9. Just to see the difference. I just bought this truck and I only changed the brakes to 50%. I haven't messed with the punch settings yet. The car takes off pretty quick at level 4 already.
I got real lucky. Had a programming card for a different car that worked on this ESC as well. Dynamite LED Program Card, DYNS3005 is what I used, if it helps any!
Glad to help! I sometimes video these and think is it worth it? Comments like yours make me know it is! I shot a video on 'how to reverse traxxas throttle' and I posted it thinking who's that going to help? Anyway coming up on 40K views later, I guess the answer is quite a few. I shall continue to do these 'how to videos' no matter how big this channel gets.
Thanks for all of the detailed and very thorough reviews and testing, question i have is with the banggood dumbo rc radio upgrade will i still have the avc mode for the truck?
Now the dumbo rc radio receiver has a gyro in it that you can turn on or off, and when on you can control the level of input it has from the transmitter a bit like avc. I say a bit like as it controls the steering but doesn't do the power like AVC but on the upside it has a 500m range unlike the stock radio...Hoep that helps
thanks! Lot more coming from the infraction as soon as the rain stops, just got two new 8s power hobby packs to test in it (hang on that's 16s! What could be coming in january!)
Dude a need new batts for me truck am not going for high speed runs just yet just longer run times any recommendations? Ps jus uploading first run I’m in the Uk so it’s cold an wet🙄
Love your videos. I just bought the Infraction and have 2 3s 50C batteries in it and it wont drift or donut or really even break the tires loose. Do I need a higher C rating battery, or need to change some setting? I did the brake to 50% as you suggested.
Jason thanks for the nice words. Assuming you got this from new? If so then something is slightly amiss but not maybe a big problem, however if it's new you'll need to get some heat into those tires before they begin to smoke/drift at their best, best way is hard acceleration with quite a bit of steering on. Also make sure the AVC dial is set to about 50%, as well as countersteering into the drifts, that AVC dial also acts as the steering dual rate, if you turn it to zero then put on full lock you'll see what I mean, then turn it to 100% and turn on full lock again and you'll have much more steering angle. My first thought is that could be the problem in it not wanting to drift. I would try that first of all. You need the steering angle to provoke the back end to put some heat in the tires. If you got it used then let me know as I've something else to try.
It’s the only setting on variable 1 that you can’t seem to change on this esc it’s just set to Lipo and in the manual it’s the default one. There seems no on or off for it which does make you wonder why it’s down as a variable on the esc when you can’t seem to change it? You raise a good point though
Buy an Infraction here - bit.ly/34GFScc Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.com/custlink/mD33VJz8zU It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!
Just used your vid to program my infraction, very straight forward video thank you 🙏
I would like to see a video difference between punch level 4 and level 8 or 9. Just to see the difference. I just bought this truck and I only changed the brakes to 50%. I haven't messed with the punch settings yet. The car takes off pretty quick at level 4 already.
I got real lucky. Had a programming card for a different car that worked on this ESC as well. Dynamite LED Program Card, DYNS3005 is what I used, if it helps any!
Thanks I will get one to demo it . People said hobbywing but my hobbywing card doesn’t work on this one. Thanks for the tip!
According to my manual my break setting is default 75% it’s a version 2 I guess with handbrake. Any help would be nice. Thanks
Hi, have just tried this and when I trun it on the esc just keeps beeping on red light and doesn't change, any help??
Is there no way to turn off low voltage cutoff?
Thanks!!
Exactly what I was looking for!
Thank you
Glad I could help!
You really know how to explain this info. Thanks for your help big guy.
Glad to help! I sometimes video these and think is it worth it? Comments like yours make me know it is! I shot a video on 'how to reverse traxxas throttle' and I posted it thinking who's that going to help? Anyway coming up on 40K views later, I guess the answer is quite a few. I shall continue to do these 'how to videos' no matter how big this channel gets.
This is perfect try it on my felony asap
Thanks for all of the detailed and very thorough reviews and testing, question i have is with the banggood dumbo rc radio upgrade will i still have the avc mode for the truck?
Now the dumbo rc radio receiver has a gyro in it that you can turn on or off, and when on you can control the level of input it has from the transmitter a bit like avc. I say a bit like as it controls the steering but doesn't do the power like AVC but on the upside it has a 500m range unlike the stock radio...Hoep that helps
How much faster will it go?
Many thanks jus got me infraction an your vid was much easier to follow than the ins !! Cheers dude 👍subbed...
thanks! Lot more coming from the infraction as soon as the rain stops, just got two new 8s power hobby packs to test in it (hang on that's 16s! What could be coming in january!)
Sweet!
Dude a need new batts for me truck am not going for high speed runs just yet just longer run times any recommendations? Ps jus uploading first run I’m in the Uk so it’s cold an wet🙄
First run ua-cam.com/video/zIz1OGMqmDI/v-deo.html
Love your videos. I just bought the Infraction and have 2 3s 50C batteries in it and it wont drift or donut or really even break the tires loose. Do I need a higher C rating battery, or need to change some setting? I did the brake to 50% as you suggested.
Jason thanks for the nice words. Assuming you got this from new? If so then something is slightly amiss but not maybe a big problem, however if it's new you'll need to get some heat into those tires before they begin to smoke/drift at their best, best way is hard acceleration with quite a bit of steering on. Also make sure the AVC dial is set to about 50%, as well as countersteering into the drifts, that AVC dial also acts as the steering dual rate, if you turn it to zero then put on full lock you'll see what I mean, then turn it to 100% and turn on full lock again and you'll have much more steering angle. My first thought is that could be the problem in it not wanting to drift. I would try that first of all. You need the steering angle to provoke the back end to put some heat in the tires. If you got it used then let me know as I've something else to try.
On the top of your remote you have a switch that has a low/medium/high setting could be in low ??
Great info
Do you know a way to lower the lvc on these Arrmas or to turn it off all together?
It’s the only setting on variable 1 that you can’t seem to change on this esc it’s just set to Lipo and in the manual it’s the default one. There seems no on or off for it which does make you wonder why it’s down as a variable on the esc when you can’t seem to change it? You raise a good point though
good rc