Installing GTX 1650 Low Profile on Thinkcentre M920 SFF
Вставка
- Опубліковано 29 сер 2020
- Please Like & Subscribe
Cause i upload rare videos
Installing GTX 1650 Low Profile on Thinkcentre M920 SFF
*after i upload this video I just realize that the cut could be less, only cut the wallside (vertical side), no need the horizontal (horizontal side).
so the top side of GPU will still covered with the bracket.. 😊
At 3:48 the cutting should allow for greater clearance, if the case is bumped during operation the gpu circuitry could make contact with the steel case and cause an electrical short.
Bro I love videos like this. Keep up the amazing work bro!!!
Thanks
Bro! is a great custom! good job! but i advice you try find a power suply with 500 or 600 watts in the future for avoid surprises, besides... with more power you can get more HHDs !
nice work 👏👍👍👍
Great video. Very helpful. Love these little SFF gaming rigs.
I was looking for a solution. After all, this method is the best.
Did you have any problem with metal filings causing a short or other issue on inside of the case? Did you vacuum it after or blow it out with compressed air?
What else can you do really, if they make it too tight for a decent card ;)
WOW!
Cool, I had a m900 with a Geforce 1050ti LP and recently purchased an M920s, to my disappointment, I couldn't put the 1050ti on it and had to put a "modest" 1030. I will take courage to cut the case and put my 1050ti that is in the m900.
PS I'm a portugueese speaker, sorry for any error, i've used google for translating.
actually you dont need cut like i did,, i just realize that the cut could be less, only cut the wallside (vertical side).
the horizontal (horizontal side) no need.. so the top side of GPU will still covered with the bracket.. 😊
@@bugisuhana1365 thanks for the tips, next weekend i'll try to do it. Post the results
@@rodrigo2208 results?
Hei! did anyone have issues with power? I have a m900 sff i7-6700 and Quadro card and they max at 150 watts when I stressed them both at the same time.
Pretty sure the psu will handle some extra power but will totally be maxed! not sure if i want to do that. what do you think?
@@mohammadalhasan4253 Don't
Gila suhu mantap beud
Thanks
Haha!!! I’m doing the same thing to mine!!! Great Minds!!
Mantapppp
mareppa
Genio!!!
Thanks a lot, I have this PC and I'm trying play some games but the graphic is poor, GTX 1650 is not excellent but will help me on it
Did you have any issues with the stock psu?
Hi, thanks for your video. Would it work with a 1660 super with single fan? I have the same lenovo
Great video! do you know if this could work on a 910s ?
Nice work, man! I was planning to do the same with my M910s for installing GTX1650.
Second problem is to update PSU. I have old one good PSU BeQuiet TFX Power 2 300w but !!!! - it can't be instal in my M910s (can't fits there).
'BRO TUVISTE ALGUN PROBLEMA AL INSTALAR LA TARJETA GRAFICA EN LA PLACA BASE ? YO TAMBIEN TENGO ESA MISMA PC
I think Lenovo needs to think about it and make a product, does it make sense to upgrade the graphics card and cut the computer with a grinder?
if u have a graphics card that has 6 pin pci-e cord where do u plug it into the motherboard?
Hi sir i have an m800 could i put a 1050 ti low profile if i have a 240w power supply
Olá!
Sabe dizer se posso colocar um processador i9 9th se atualizar a bios? O encaixe é o mesmo nas duas gerações.
i also use 1650 low profile from msi on dell optiplex 790 sff, it is plug and play btw :D
Yeah, Optiplex more easy than Thinkcentre
@@bugisuhana1365 yes, before using Thinkcentre M910S, I used my GT 1030 to dell optiplex SFF and it can be installed easily.
I got a M710s I’m measure once I get it out the pawn.
Managed to do similar with a Lenovo 720s and Nvidia a2000. Sadly the card must have been used for mining as the fan was worn and noisy 😢
this PC was so space constrained that I even need to bend that drive bay bracket a little bit just to fit the quadro p620 Graphics card. that gpu length is 145mm on the paper.
wkwkwkw, sempet kepikiran mau beli mini pc spt ini dan dipasangin gpu non pin power, kalau pasang yang GTX 1660S gimana bang? kan ada pin powernya tuh, PSU nya punya pin power buat GPU nya kagak?
satu lagi, itu airflow nya bagus gak? kan casing nya kecil bet itu hehehe....
Hello, in this way the graphics card and the CPU fan are positioned very close. Especially when playing games, the heat produced by the graphics card heats up the inside of the case and the CPU fan is constantly running at 100%. How did you solve this problem?
Great upgrade, Could you tell me, what Is the power supply of your PC?
These come with a 210w standard.
I had Thinkcentre M910S, and installing NVIDIA GT 1030, I also need to cut the steel frame to put my GT 1030 to its slot. working well but I can not install my 3,5 HDD Drive, so I replace with 2,5 inch HDD.
Hi, have you trying to see if it plays be games?
nambah ram ya om, merknya sama semua apa beda merk om... kalo beda merk bermasalah ga sih ya? oh iya kasih heatsink biar adem ya om
Can we use GTX 1660 in Lenovo m81 desktop
Hehe
where you find it
Turn off intel turbo boost in the bios, much more stable fps, power consumption lower 10-20w. Turbo boost helps nothing, maybe little more on max fps.
lol exactly what i did. ;)
Hi bro the reference of the msi card please ! Thx
Psu masih bawaan?kuat kah dengan gtx1050 kan 75w y?
Hi Sir! I do have a Lenovo ThinkCentre m710s variant do you I can do the same thing with my unit ? haha
Yes, Of Course
@@bugisuhana1365 M72e ?.
can i put gtx1650 to dell optiplex 3050 i3 7100 😮
Well shit lets home the lenovo I have doesnt pull move watts than this one. It might just work.
Where is the harddrive
Thats a bottleneck upto 14% i guess
Did you have any issues with the stock psu?