I saw 2 screws that didn’t hold at all….the first screw for the folding table and the first screw for the pegboard. ALSO, notice the screwgun with the tape over Hitachi…lol
Hi MrDbone have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
Protip if you live somewhere hot and have your water heater in the garage: look into upgrading when necessary to a hybrid one. It'll keep it cool as a 'side effect' of the heat pump on it
The Bosch Sabre saw was the best in our shop going back to the early sixties. I could cut a radius corner on a piece of 3/4" plywood and the cut was perpendicular to the surface. Great tool.
What the hell kinda heater install was that? It's literally facing the ground LOL... I hope that's only because the dude screwed up the mounting base and they had to film anyway due to time constraints. And hopefully they sent someone out to install and angle that properly
I have a garage built with those terracotta bricks. I’m always hesitant to just drill through them in fear of shattering them over time. Seems that’s not a concern here?
You can use a common masonary bit with a standard drill and then the blue masonary screws it should be just fine. Try drilling in an out of sight area if you are skeptical. Nothing wrong with that.
The young lass looked real comfortable using the driver. I hate it when blokes go bwerp, bwerp bwerp, bweeeerp. Same goes for blokes using line trimmers. Auugh! 😡
Not loving this episode: (1) no discussion whatsoever about drilling into masonry and the right screws to use for that application. From the closeup of the pegboard installation, it looks like they're using deck screws! (2) even Tom doesn't use the antikickback blade guard when ripping plywood, apparently,... (3) that janky box fan hanger setup is really HGTV-worthy.
Excellent show!
I saw 2 screws that didn’t hold at all….the first screw for the folding table and the first screw for the pegboard. ALSO, notice the screwgun with the tape over Hitachi…lol
A very good firday morning to you all from Wellington Somerset in the UK 🇬🇧
Hi MrDbone have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
Did she say biscuit joiner , who doesn't love biscuits, DOH !!! 😅😋
Nothing more satisfying than to see a woman with tools. Nice video.
I've definitely seen this one
Do everyone a favor and report the psycho brian glade every time you see their idiotic comments
I believe the t-stat was put to close to the heater. It will shut off premature.
Once a month a DIY show👍🏼🍺
Protip if you live somewhere hot and have your water heater in the garage: look into upgrading when necessary to a hybrid one. It'll keep it cool as a 'side effect' of the heat pump on it
How many times you guys gonna rerun this episode
@@brianglade848 Not until his bonah goes away!
Chicago? This work shop's been broken into and the tools are long gone I bet.
That Bosch miter saw is way too nice.
The Bosch Sabre saw was the best in our shop going back to the early sixties. I could cut a radius corner on a piece of 3/4" plywood and the cut was perpendicular to the surface. Great tool.
Thank you so much! This old house
3:04 underappreciated B roll shot
Wow, that’s what I need in my barn wonderful job on installing the heater.
Wait, Tom just gave her a Bosch miter saw?!
What the hell kinda heater install was that? It's literally facing the ground LOL... I hope that's only because the dude screwed up the mounting base and they had to film anyway due to time constraints. And hopefully they sent someone out to install and angle that properly
I have a garage built with those terracotta bricks. I’m always hesitant to just drill through them in fear of shattering them over time. Seems that’s not a concern here?
You can use a common masonary bit with a standard drill and then the blue masonary screws it should be just fine. Try drilling in an out of sight area if you are skeptical. Nothing wrong with that.
Why do I have a feeling Bosch sponsored this video
It was probably all of the Milwaukee tools used in the video.
Wonderful job you did for that young woman.
I want to see the ultimate garage for cars.
See jay leno's garage.
captain verns keepers
overhead doors loved weepers
mounted toads peepers
I've watched the garage shop clip several times.
Are they ever going to advertise Harbor Freight?
How do I get you guys to come over my house, it was built in 1912.
Isn’t this a repost?
TOM! Open my letters!!!
Oof at flip flops in the shop.
That first concrete screw went literally into nothing.
I was kind of wondering why they didn't use concrete anchors
It was about making a small garage into a workshop not blue screws
I need some scrap plywood and lumber if anyone has some they want to get rid of
@@brianglade848 I'll be ready for you can't wait to see you
@@brianglade848 no I'm sorry
Do you still have my phone number call me when you get close
@@brianglade848 great what time do you think you will be here
@@brianglade848 you coming over tomorrow
The young lass looked real comfortable using the driver. I hate it when blokes go bwerp, bwerp bwerp, bweeeerp.
Same goes for blokes using line trimmers. Auugh! 😡
@@Kevin-mp5of Nah mate, you're liv'n on the wrong side of town, we don't allow 2 strokers here.
This old episode!!
Special? This is more than 5 years old! Still a episode, but not new.
Not loving this episode: (1) no discussion whatsoever about drilling into masonry and the right screws to use for that application. From the closeup of the pegboard installation, it looks like they're using deck screws! (2) even Tom doesn't use the antikickback blade guard when ripping plywood, apparently,... (3) that janky box fan hanger setup is really HGTV-worthy.
Why are we recycling old content and calling it new?
Who called it new? It clearly said in the title it was from season 19.
mount aetnas lava
jacqueline graham welch carver
scotts marijuana
Pst pst
Meow
So her neighbor is ‘Joliet’ Jake Blues?
No it's George "Home Invasion" Floyd..