Surprisingly good Multiool for $30 (Nextool Sailor Pro)

Поділитися
Вставка
  • Опубліковано 14 жов 2024

КОМЕНТАРІ • 230

  • @michaelmartin2262
    @michaelmartin2262 Рік тому +26

    As a person who is a sailor, or Merchant Marine I like the fact that someone is starting to target gear towards us, especially since our occupations take up 1/5 of the job force of america. This would be a good deck hand tool, in my opinion. Cheap enough that you won't miss if loss or stolen. Also, when I was on deck I used needle nose way more often because of cotter pins, shackles, just rigging gear in general. The other assortment are also tools I could see using for deck work. But in my opinion, it needs a whistle. I don't use it often but I have done so with my own tool to get peoples attention in loud areas or to silence 20 or more people during drills or general confusion.

    • @maxlvledc
      @maxlvledc  Рік тому +10

      !!!! Plz tell me more! What would your ideal toolset be? Better yet Email it to me...maybe I can make itm

    • @richardsullivan1776
      @richardsullivan1776 Рік тому +2

      Very cool, thank you for sharing this information. I wasn't sure if this was just the name of the multitool, I'm happy it has a specific tool set aimed for sailors.

    • @davidyendoll5903
      @davidyendoll5903 Рік тому +2

      @@maxlvledc Sailor . Surely a marlin spike should be included ?

    • @pmgodin
      @pmgodin 21 день тому

      Plus the whistle I would add a shackle key and a marlin spike.
      Then make the whole thing in H2 or other great stainless steel and this would be a tool you can have on your boat forever.

  • @pyrosmoak53
    @pyrosmoak53 Рік тому +41

    Not bad for a $30 tool. I agree with you about the file and upgrading the steel.
    With your confusion about the weight I'm surprised you didn't weigh it in the sheath with the bits. I'm guessing that's how they're getting that higher weight.

  • @seanmangan2769
    @seanmangan2769 Рік тому +2

    *technical note: the audio on this is fabulous! Clear, clean, a joy to listen to. You do good work!

  • @nobody572
    @nobody572 Рік тому +14

    I'd definitely like to see a comparison of the budget kings. That way I can choose the right one for my daily driver and job companion.

  • @JohnDoe-rw5um
    @JohnDoe-rw5um Рік тому +12

    I bought the Sailor Pro a few werks ago, because I'm a sailor. I was disappointed one of the springs that keeps the plier handle from flopping around broke almost immediately from simply opening it a few times. It changes the feel of the pliers that you liked.
    I did figure out how to open the knife one handed. Open the lever with your thumb and then push open the blade with your index finger. The likely reason for the doubke lock is sailors are sometimes contorting themselves or moving quickly and it's important for tools to not open accidentally. I don't know why they didn't just make them inside open, but a one hand open knife is important for sailors and is considered important for safety.
    One unique feature is the marlinspike on the end of the file. You use it to untie knots. Its not good because the point needed to be sharp and the edges rounded but a Dremel fixed that.

    • @freddykruger3320
      @freddykruger3320 Рік тому

      Gerber strata might suit you.

    • @NexTool168
      @NexTool168 Рік тому

      Good day friends, NexTool would refine this lock design for better usage. Lets looking forward to the upgrade.

  • @jerichoarroyo105
    @jerichoarroyo105 Рік тому +42

    What?! No marlin spike on a tool called a "Sailor Pro." Nah, I'll pass! Thanks for showcasing it. 👊

    • @JohnDoe-rw5um
      @JohnDoe-rw5um Рік тому +3

      It's on the end of the file.

    • @MrKnivesGuy
      @MrKnivesGuy Рік тому +4

      ​​@@JohnDoe-rw5um that's a marlin spike!?!?
      I think it's a bottle opener instead.
      Maybe I'm wrong...

    • @maxlvledc
      @maxlvledc  Рік тому +7

      Good point!!

    • @kdt85
      @kdt85 Рік тому +1

      ​@@maxlvledc I see what you did there

    • @Adelaide-audits.
      @Adelaide-audits. Рік тому

      ​@@kdt85 lol

  • @SamsWorkbench
    @SamsWorkbench Рік тому +7

    *As a collector of multitools with marlin spikes, I don't know why this was called the "Sailor Pro." No marlin spike at all. It should not have been named the "Sailor Pro." You can see my collection of multitools with marlin spikes. I was going to get this one when I thought the marlin spike was in it. It's a nice tool but no marlin spike. That locking part I'm not to fond of either. Reminds me of one of the Gerbers. Thanks for showcasing this.* 👊

  • @Dwizzlejay
    @Dwizzlejay Рік тому +2

    I have this one, and yes it has a learning curve...the key is for the outer tools pointer finger slides the lock down and thumb opens ...

  • @naknakacknak
    @naknakacknak Рік тому +5

    The double lock prevents the blades from closing when they are opened which makes it worthwhile and desired.

    • @NexTool168
      @NexTool168 Рік тому

      Thank you for your recognition.🙂

  • @gregrudzinski
    @gregrudzinski Рік тому +7

    The total weight includes the bits and adapter. 420 is acceptable for saltwater use if hardened to 56. For terrestrial use then D2 would be a better budget steel. I still like the entry level Leatherman better though. It is almost there so there is hope.

    • @maxlvledc
      @maxlvledc  Рік тому +3

      The scissors outperform nearly any leatherman which is quite awesome.

  • @francobuzzetti9424
    @francobuzzetti9424 Рік тому +5

    pleasantly surprised by nextool lately! a budget multitool gauntlet would be amazing! checking the quality of Philips as well as flats(they always suck somehow) also the saws can be a hit or miss
    ps: near the end i was screaming at the screen begging you to just throw the tool with the bits on the scale!

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Yea, it's probably weight of the whole package

  • @willienelsongonzalez4609
    @willienelsongonzalez4609 4 місяці тому +1

    Safety feature for opening the tools is a great feature. Nothing strange, weird or complicated about it.

  • @galadballcrusher8182
    @galadballcrusher8182 Рік тому +1

    I must say i appreciate the locking because on some cheap multitools i 've seen that the unfolding tools get loose over time and as you work the pliers, scissors or knife blade pop out.

    • @NexTool168
      @NexTool168 Рік тому

      Thank you for your recognition. NexTool would refine this lock design for better usage. Lets looking forward to the upgrade.

  • @demonfighter6
    @demonfighter6 Рік тому +1

    For your head-to-head comparison of multitools, how about starting with a bunch of everyday tasks you might encounter while out and about: tighten the leg screws on a lunchroom table at work, open taped-up packages, open that stinkin plastic packaging around electronics which tear up your hands no matter what you do, file down a burr on your desk drawer, clean crud from under your fingernails, and so on. Evaluate on whether it does the job and whether it's convenient to do the job.
    Next, systematically use every tool on the device, even if you have to contrive a circumstance where it would be needed.
    Next, test to destruction or damage: Will the phillips head driver round off if you try to loosen a really stuck bolt? How many inches of trimetal can can the knife blade cut before it's too dull to cut paper? Do the scissors loosen if you cut something tough 100 times?
    I can see you not wanting to destroy all of your tools, but I think that that would be the most useful of the tests. I've bought any number of multitools over the years and several of them worked fine at first but wore out or broke unacceptably quickly. (It's not that I'm especially destructive. I've been using my first Craftsman hand tools for 35 years and they're still in good shape.)

  • @RandomGuy-qm3mg
    @RandomGuy-qm3mg Рік тому +5

    bailing wire would make a good standard for the wire cutters when you do the inexpensive multitool shoot out.
    You do wonder how much it would add to the price for these tools to use a better grade of steel.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Not much I'm guessing

    • @Bethany415
      @Bethany415 Рік тому +1

      Heck, 8Cr13MoV has got to be a cheap upgrade. 9Cr18MoV would be an excellent sweet spot, really.

  • @WhiteVaille
    @WhiteVaille Рік тому +1

    Wow, impressive. This might be my first multitool. Looks like a nice kit without having to buy additional accessories. Agree that the two-handed operation is very annoying, and also agree that if you can't do the file well, don't bother, but overall I think this would be lovely to have in the glovebox.

    • @NexTool168
      @NexTool168 Рік тому

      Just check the link and get it

  • @SussexEDC
    @SussexEDC Рік тому +5

    Interesting little tool and impressive it comes with the bits and sheath. I just got a Victorinox Super Tinker today, I know it doesn't have the pliers (I carry Knipex for this), but it's a near perfect multi tool in my eyes.
    I'll have an unboxing video up on that soon.
    Thanks for sharing your thoughts on this tool, great overview.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Supertinker is one of the best tools possible imo

    • @SussexEDC
      @SussexEDC Рік тому

      @@maxlvledc Totally agree. 🤟🏻

    • @simonh6371
      @simonh6371 Рік тому +1

      Great with the Knipex Cobra XS, I carry those with my Climber sometimes. But then I was just so tempted by the inline driver and went for the Swisschamp as I'd tested whether it would fit into my 5th pocket (by putting my Climber and Hiker together in it) and it does...so now I carry that with the Knipex Cobra XS and a Spyderco Urban. Overkill perhaps? But it's all surprisingly pocketable (the Knipex sit deep in my pocket in a leather slip, actually a Phillips case for an iPod Nano!) and gives me a load of capability.

    • @simonh6371
      @simonh6371 Рік тому +1

      Plus you can get the Super Tinker and a Knipex Cobra XS for just under 50 quid which is what you'd pay for a LM Squirt PS4 (if you can find one) so it's a no brainer.

    • @zoephin6205
      @zoephin6205 Рік тому +2

      Good choice! I use SuperTinker with plus scales at work. You can file down the 3D phillips to fit a Nextool bit adapter. So handy!

  • @norsefalconer
    @norsefalconer Рік тому +1

    Great review, Thanks!
    I think ALL of these tools need to ditch the Phillips design for Japanese Industrial Standard (aka JIS). JIS isn't [as] cam-out prone.

  • @glenparker234
    @glenparker234 Рік тому

    That locking the outside blades is a really good idea I have one of the first models of the leatherman and I’ve gotten hurt many times trying to use the pliers and the blades popped out and cut my hands I liked the tool but quit carrying it because of the knife blades popping out they would lock open but they wouldn’t stay closed. And the lock looks a lot better than most of the others I have which are very hard to get blades and tools out and have to open other tools to unlock the ones out it’s nice to have a tool that you can use if you want a switchblade Knife then get one but they’re not any good as pliers or knife’s

  • @imanassole9421
    @imanassole9421 Рік тому

    8:22 More than Leatherman gives you. I've finally broken down and decided to get a Surge for my EDC. My cheapies will always be useful though. After all is said and done I'm looking at around 250 bucks. Surge, bit driver kit, pocket clip, couple other bits and bobs.

  • @Taolan8472
    @Taolan8472 Рік тому +1

    Not bad for a $30 dollar tool. Especially given the european market, it's good to see more locked-closed tools. I actually quite like that as a feature.

  • @bombfog1
    @bombfog1 Рік тому +7

    Just received a used Squirt this morning that I ordered after all of your recent videos on the smaller multi-tools, especially the squirt. In addition to the MUTT, which you recommended to me as a shooter, I’m a very pleased with the Squirt.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Hold onto that mut! Hope it doesn't get Discontinued

    • @bigjim55able
      @bigjim55able Рік тому

      @@maxlvledc I think it's gone. I can't find one

    • @matrixist
      @matrixist Рік тому

      @@maxlvledc The will bring it back. Too many complaints of its discontinuance.

  • @realbroggo
    @realbroggo Рік тому

    Great tool for the price - actually well thought out. Glad the weight was wrong! The locking mechanism is frustrating but it's the steel made me cry. 420J2 is about same as 3Cr13 - just above butter knife. I know it's made to a certain price point but in 420HC this would really rock. Sharp blades all.

  • @troymanning3150
    @troymanning3150 Рік тому

    Yes please!! Love to see head to head budget tools.

  • @HeartMarksman
    @HeartMarksman Рік тому +2

    Honestly for me a task I always want to see is cutting ethernet cable. In my experience the tiny wires inside usually get chewed up instead of nicely cut on multitools

    • @ex7229
      @ex7229 Рік тому

      Network engineer here. I agree.

  • @artyfhartie2269
    @artyfhartie2269 Рік тому

    My multitool has everything even a combination of power drills, sander, chainsaw and circular saw and wheels to carry it around

  • @christophersherratt7299
    @christophersherratt7299 Рік тому +1

    In the uk and the EU Blade Length is priority 3inch Stop Moaning about having to use Both Hands 🙌 THE GOOD LORD BLESS YOU WITH 2 OF THEM USE THEM

  • @skibbiethegamecat9057
    @skibbiethegamecat9057 Рік тому +2

    I really like spring loaded pliers so I chose the Roxon Phantom but I think I could have gotten by with the Flash. My question for you is, have you seen a really good flashlight on a knife combo? Most times the flashlight is very small and unusable.

  • @ETBob51
    @ETBob51 Рік тому

    For almost the last ten years of my job as an electronic technician, I used a $10 Winchester multi-tool that came with a couple of smaller tools and a carrying pouch. I have been retired for 14 years and still carry it with me on my belt every day. It doesn't lock open or closed, so I guess I am used to easy access. This Nextool looks like a much better tool. I couldn't tell by your demo, but did the tools lock in the open position? If so, I really would have preferred it.

    • @canteen1743
      @canteen1743 Рік тому +1

      of course the tools locks when they are open

  • @jamesleary1405
    @jamesleary1405 Рік тому

    I'd say run some scissors tests and testing the Phillips against some different woods and screws. Also a test on the blades to see how long before they are in need of a sharpening.

  • @tbread1128
    @tbread1128 Рік тому +1

    100% worth doing a gauntlet for the budget tools. Maybe pick up a roxon Storm to compare to the Phantom, since I heard the new scissors are not as good as the Storm ones.

    • @maxlvledc
      @maxlvledc  Рік тому +2

      Oh??

    • @tbread1128
      @tbread1128 Рік тому +1

      @@maxlvledc Heard this in the comments of your videos! No idea if this is accurate but would be interesting to test, I think?

  • @saldomino1639
    @saldomino1639 9 місяців тому

    Great Video ! Nice multitool for $ 30.00 dollars I believe they made it with a double lock that way it would be marketable in Europe Countries!

  • @mattyvlietstra5017
    @mattyvlietstra5017 Рік тому

    Absolutely you should do a budget multitool video

  • @edgarmartinez2983
    @edgarmartinez2983 Рік тому

    Gauntlet!!!!
    Wood,Wire,PVC,Body Parts, etc...let's get it!

  • @colombard140
    @colombard140 Рік тому

    ❤The double lock is a child safe mechanism to stop it from being open by a child.😂

  • @marchertig9772
    @marchertig9772 Рік тому

    Well, I will try it. I'm an aircraft mechanic. IT'S VERY ATTRACTIVE.

  • @IlmarBeekman
    @IlmarBeekman Рік тому +1

    If nextool would make the flagship pro with this screwdriver I would purchase instantly.

    • @NexTool168
      @NexTool168 Рік тому +1

      Let's looking forward any innovations

  • @dolebandit9942
    @dolebandit9942 Рік тому

    From what I have seen online 420 J2 Stainless steel has a hardness of about HRC 54 For a knife blade that`s not hard enough for me, HRC 59 - 61 Is more what I prefer

  • @SustenanceNCovering
    @SustenanceNCovering Рік тому

    Damn!
    Currently unavailable.
    We don't know when or if this item will be back in stock.

  • @williamyoung369
    @williamyoung369 Рік тому

    I like the threading awl/reamer. The rest is okay. Will it adjust the carburetor on a straight 6?

  • @AtomicBleach
    @AtomicBleach Рік тому +1

    I like how you sound surprised that Nextool has an excellent pair of scissors. 😂. That's literally their calling sign. Strange two handed operation.

  • @septegram
    @septegram Рік тому

    Change the locking mechanism so that once you slide it down, it stays free until you open a tool. The tool locks into place, so you have to unlock it again to close it. It locks closed until you free it, which you can do immediately if you choose.

    • @NexTool168
      @NexTool168 Рік тому +1

      Good idea, I would forward to our engineer, please pay more attentions to the lock upgrade.

  • @nightfall8764
    @nightfall8764 Рік тому +4

    Couldn’t you use your figures on the back to unlock and then thumb in front to one had the blade out?

    • @tvheadd
      @tvheadd Рік тому

      Yeah exactly, a kind of "trigger pull" motion with the index finger as you flick with the thumb.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      I do that in the video..I just don't think everyone will have the dexterity.

    • @mgtowanonymous3120
      @mgtowanonymous3120 Рік тому +1

      ​@@maxlvledc please broooo we need u to cover the leatherman raptor clones.
      If u did i can't find the video 8-

  • @danpost4755
    @danpost4755 8 місяців тому

    Great review! The unlock to open situation is a deal breaker for me. Otherwise, it looks decent. Except for the file, of course.

  • @PWNHUB
    @PWNHUB Рік тому

    4:29 not finding anything weird about a locking mechanism tbh, you're kinda focusing on it but non locking knives suck.

  • @davidrushing2507
    @davidrushing2507 2 дні тому

    I don't have a problem with the fact that it's a two-handed tool. My problem is that that thumb stud is clearly a one hand opening feature. It makes no sense that they put a one hand opening feature on a tool that requires you to hold a button down to unlock the tools.

  • @Cucucumberpie
    @Cucucumberpie Рік тому

    10:47 surly interesting 👍👍👍 + idk if its my idea but from my pov big brands like leatherman don't really seem to have the best price/what you get ratio for a casual edc considering all the other alternatives

  • @deykno87
    @deykno87 Рік тому +1

    Nex tool scissors have never disappointed

    • @NexTool168
      @NexTool168 Рік тому

      Good day friend, thank you for your recognition

  • @AlfredLoo
    @AlfredLoo Рік тому

    Take care when using the bottle opener. You can stab the hand gripping bottle. Does the scissors cut paper?

    • @NexTool168
      @NexTool168 Рік тому

      Sure, the scissors did cut paper.

  • @nerdythings3889
    @nerdythings3889 Рік тому +2

    Would love a Under $50 Multi-Tool Shoot Out Vid! What's your Favorite Multi-Tool Under $50? After watching the video this Nextool just doesn't do it for me, I picked up the Costco Exclusive Leatherman Bolster for $40. I've also heard good things & been thinking about the Walmart Ozark Trail Multiforce for like $45.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Yep, multiforce is still #1 under $50 most likely.

  • @rickanthony5147
    @rickanthony5147 Рік тому

    Some guanllet suggestions pulling , cutting metal nails. Using the awl to make pilot holes, saw cutting wood

    • @maxlvledc
      @maxlvledc  Рік тому

      Cutting metal nails?? Probably not a good idea with any multitool lol

  • @milesloewe8535
    @milesloewe8535 9 місяців тому

    to unlock tool from closed to open seems silly. could you take apart and handla and file lock bar on the open motion??

  • @shaunrattray6702
    @shaunrattray6702 Рік тому

    The weight on package is most likely with the bits and/or sheath.

  • @fugbn2
    @fugbn2 Рік тому

    The same exact bits are in Ganzo multitools more than 10 years so it's probably OEM produced

  • @Kevin-qj7fp
    @Kevin-qj7fp Рік тому

    There's a lock and unlock sign on the buttons that's why you have difficulty opening

    • @NexTool168
      @NexTool168 Рік тому

      Good day friends, NexTool would refine this lock design for more convenient usage. Lets looking forward to the upgrade.

  • @torchofkck4989
    @torchofkck4989 Рік тому +1

    Just FYI....
    Amazon link to featured tool does
    not go to the same tool for sale.
    Exact design discontinued ? ? ?

  • @wkrobbers
    @wkrobbers Рік тому

    If this is for sailers ware do you tie a line to it or is it so cheap you just buy another after it falls in 😢

  • @honestinfo7780
    @honestinfo7780 Рік тому

    Love to see an overall comparison.

  • @nycbike73
    @nycbike73 Рік тому +1

    it looks and acts like a $30 multitool. Yes I think all the lower priced multitools should go through and everyday type scenario and use. They don't want to use better steel because they bank on selling in mass.

  • @GregBrecker
    @GregBrecker Рік тому

    Yes you should do the video

  • @TheStoyanbahchevanov
    @TheStoyanbahchevanov Рік тому

    It looks like a pretty good tool. But really the weight will put me off. This is important when you buy online, and I think will cost the many customers. Do you think that's the total weight with sheat and bit kit?? Cheers 👍

  • @dsimon33871
    @dsimon33871 Рік тому

    Nextool is one of my favorite tool producer. I have the sailor mini, and the card tool with pliers. Comparison wise, the longer I play with these tools the more the importance of having a locking bit driver seems to loom large. As much as I like this tool? I would take the Bibury 21 function because of the locking bit driver with no sleeve! Sleeves all have too much play.
    As far as the price point, I agree with the camp that says the ratio of what you get for the price should be important... Do I need a titanium tool that will last 5 lifetimes? hardly! with all the innovations most of these tools become dated in a very short time. I don't agree with the somewhat patronizing sounding "Its ok for a 30 dollar tool" statement. A soft steel tool is a design factor and if the steel density makes the tool break, or incapable of doing, then it is a design flaw imo. Until that is evident, steel qualities are a design factor. I have carbon steel knives that rust if I look at them the wrong way lol, and I have seen soft steel benefit by grabbing a nut where other tools could not.

    • @maxlvledc
      @maxlvledc  Рік тому +1

      You make a fair and thoughtful point...I will think on this..

    • @dsimon33871
      @dsimon33871 Рік тому

      @@maxlvledc
      I have to apologize lol. I thought I had formatted my post! I realize it's a big wall of text! Thank you for reading through that and again I usually format these things!

  • @peddypeoples941
    @peddypeoples941 Рік тому

    Regarding German laws, you can't get a better Mt than the Swisstool,even without still prefer it to Leatherman(look cool, lack refinement)

  • @bobbymills4476
    @bobbymills4476 2 місяці тому

    Try the Nextool Flagship Captain next

  • @duggydugg3937
    @duggydugg3937 Рік тому

    scissors .. very impressive

  • @craigmooring2091
    @craigmooring2091 Рік тому +1

    Do you think that 317 g. is the weight of the tool and the bits in the sheath?

  • @lacanian_lifter
    @lacanian_lifter Рік тому

    Think that bit set and adapter would fit on any part of a Victorinox? That alone would make this a good buy for 30 bucks...

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Hmm, I should check

    • @lacanian_lifter
      @lacanian_lifter Рік тому

      @@maxlvledc please do, thanks!

    • @davidhebert3156
      @davidhebert3156 Рік тому

      Try using your pionter finger to unlock from the back and your thumb to open the blade

  • @sweetwilliam61841
    @sweetwilliam61841 Рік тому

    How about you take this apart and see if the double lock feature can be defeated and eliminated?

    • @maxlvledc
      @maxlvledc  Рік тому

      It can, I just have to round the tang

  • @bigbrowndad6214
    @bigbrowndad6214 Рік тому

    The NexTool Knight is my favorite tool. I own 5 of them. I can live without pliers, and it's one handed.

    • @NexTool168
      @NexTool168 Рік тому

      Thank you for your recognition

  • @AT-ck1tl
    @AT-ck1tl Рік тому

    when it's closed, it looks like a high tech coffin 😂

  • @ex7229
    @ex7229 Рік тому

    Bought the mini to replace my squirt, very happy!

    • @NexTool168
      @NexTool168 Рік тому

      Good choice, I believe mini sailor would not let you donwn.

  • @Zeratsu
    @Zeratsu Рік тому

    thanks for the video, if you'll make a video comparison of all of your budget multitools at the same time, i'll be first to watch it!

  • @TylerSnyder305
    @TylerSnyder305 Рік тому +1

    I still can't get over the fact that none of these Chinese companies know how to offer / design a multitool that isn't oversized.
    All those leatherman wave copies like the ozark trail are huge and oversized.

  • @mr.bumper0982
    @mr.bumper0982 Рік тому

    So what do you feel is the best multi tool under $50?
    Is this better than the roxon phantom?

    • @maxlvledc
      @maxlvledc  Рік тому +1

      Hmm, value? Or just best overall?

    • @mr.bumper0982
      @mr.bumper0982 Рік тому

      @@maxlvledc fair question lol. I guess both?

  • @WoodsmanHobo777
    @WoodsmanHobo777 Рік тому

    The weight is probably the bits, sheath and tool together.

  • @syn4057
    @syn4057 Рік тому

    This isa $30 multi tool. 420 steel is perfectly acceptable, as a knife steel, and does hold an edge well, along with easy of sharpening. People now lambast the steel, because of all the newer budget steel. Read up of 420 steel. Going D2 would raise the price. As an American, I would not buy any knife with a lock keeping it closed. A decent ball would do the job just fine and the cost of the lock, should be equal to the cost of a detent ball. If the file and saw are not good, I also will not buy the tool. You never realize how much you need a stupid file, until you have a crappy one. Same with a saw.
    As far as the torture test, do ranch work and ship work; as the tests. It’s not over the top work, but if the tool can do that type of work and survive, it’s great. I have a leather an and repair barb wire fencing, file the barb wire, sawed off branches of trees growing it no fences, used the pliers as nail pry, etc. If this tool survived, I’d buy these as EDC starter tools for the young men (20-35) that I work with, who don’t know what EDC means (trust me, there are tons). They can move to Leatherman, if they feel the need, in the future.

  • @freddykruger3320
    @freddykruger3320 Рік тому

    it appears to be a copy of the Gerber Strata. Gerber, being a part German company, designed the strata to be German legal. It appears to be mostly discontinued, probably due to limited marketability. It's not an exact copy, but the general shape and locking mecahnism is pretty close. The gerber tool set has a pair of scissors vs the serrated blade.
    I don't own a next tool but the videos of them look fairly unappealing to me.

  • @tonylarose4842
    @tonylarose4842 Рік тому

    I have to cut a lot of 6 gauge raw copper, if there's a multi tool out there I would like to know about it!!

    • @maxlvledc
      @maxlvledc  Рік тому

      The Dual Force would Excell at hard wire imo

  • @Adelaide-audits.
    @Adelaide-audits. Рік тому

    Damn that locking mechanism!!, otherwise a really good unit 👌

    • @NexTool168
      @NexTool168 Рік тому

      Good day friends, NexTool would refine this lock design for more convenient usage. Lets looking forward to the upgrade.

  • @Thorson91
    @Thorson91 Рік тому +1

    uh but that's perfect for Germany, by law we're not allowed to carry single-handed opening Lockblades (§42a WaffG) :)

  • @blade9292
    @blade9292 Рік тому +1

    I was quite interested on this one but I preferred the black knight over it.

  • @ordinarypeople801
    @ordinarypeople801 6 місяців тому

    I have a question: Can I disassemble the tools and remove the pin for the double locking mechanism. It is a deal breaker for me and I would be so happy if I can operate it with just one hand. Did you tried this? Let me know, please! :)

  • @deykno87
    @deykno87 Рік тому +2

    The weight is prolly the tool and bits together 😉

  • @bentaylor4570
    @bentaylor4570 Рік тому

    Weight is including the extra bits and sheath?

  • @timlist4173
    @timlist4173 Рік тому

    Might get a few as gifts.

  • @r.tomrobison8307
    @r.tomrobison8307 Рік тому

    For weight could be the total with the case and tools

  • @josephmeier5440
    @josephmeier5440 Рік тому

    Generally a pretty good pocket tool! I disagree with you on the double lock system! Although a bit incovenient the system provides some safety for the user! As locking the blades into position this protects you from cutting your self and keeps the other tools stored safely so they don't come loose and cause the user harm while using the tool. The name isn't right without the marlin spike but overall it's a handi tool. I have had many multi tools and some are down right dangerously and should nevertheless have been sold or produced!

    • @NexTool168
      @NexTool168 Рік тому

      Good day friends, NexTool would refine this lock design for better usage. Lets looking forward to the upgrade.

  • @analogmatrix1442
    @analogmatrix1442 Рік тому

    The weight is with the bit kit and sheath

  • @Fretboard_Frenzy
    @Fretboard_Frenzy Рік тому

    Flagship Pro vs Sailor Pro... Who's the winner?

  • @MacXcode
    @MacXcode Рік тому

    Honestly, would you really recommend this multiOOL at $30?

    • @maxlvledc
      @maxlvledc  Рік тому

      Good question...it's better than many..but I think there are 4-5 that are better.

  • @knifehedon.6561
    @knifehedon.6561 Рік тому

    Try Ganzo 202b multitool

  • @Daniel-ob2ml
    @Daniel-ob2ml Рік тому

    Sounds like something I could throw in my kayak.

  • @stevemazzilli4006
    @stevemazzilli4006 Рік тому

    the link is not going to Nextool Sailor pro. is it no longer available?

    • @NexTool168
      @NexTool168 Рік тому

      Good day friend, do you still need the sailor pro? we have no inventory on FBA warehouse, if you need this, we can add the inventory for you and would shipping from China directly.

  • @kiloromeo4725
    @kiloromeo4725 Рік тому

    Likely weighed the multi tool with the case.

  • @SshanIcsS
    @SshanIcsS Рік тому

    Thanks from Germany for the two handed Info. And we dont like it to.

  • @ollelle880
    @ollelle880 Рік тому

    What about Ganzo pliers multi tools?

  • @johnstarchman4732
    @johnstarchman4732 Рік тому

    What is the knife you use in unboxing on this video

    • @maxlvledc
      @maxlvledc  Рік тому +1

      It was a vosteed racoon

    • @johnstarchman4732
      @johnstarchman4732 Рік тому

      @@maxlvledc with a Wharncliffe blade? Also were there custom scales on it?
      That knife looks cool, you dona review of it?

  • @Roberto_79
    @Roberto_79 Рік тому

    Maybe they weighed it in the pouch?

  • @rtoguidver3651
    @rtoguidver3651 Рік тому

    My Gerber and my Leatherman both broke several tools, I no longer trust multitools.

  • @andrewfirst1115
    @andrewfirst1115 Рік тому

    Есть неплохие идеи у фирмы. Но качество материалов отврвтительное, на мой взгляд. Имеется два мультитула от этой компании, металл очень мягкий. Даже от "Ganzo" инструменты намного качественнее